Ubiquiti U7-Pro-XG WiFi 7 10GbE Access Point

WiFi 7 coverage with a 10GbE wired connection

The Ubiquiti U7-Pro-XG connects a tri-band WiFi 7 installation to a 10GbE wired network. It suits managed offices and homes that need faster upstream connectivity for compatible wireless clients. Six spatial streams cover 2.4GHz, 5GHz and 6GHz, while PoE+ and an included Lite Mount support a ceiling or wall installation in the selected White or Black finish.

Highlights

Tri-band WiFi 7

• 2.4GHz, 5GHz and 6GHz radios with six spatial streams.
• 2 × 2 MU-MIMO on each band, with compatible older WiFi devices supported.

Wired speed and power

• 10GbE Ethernet uplink for a suitable upstream network.
• PoE+ carries power and data through one cable; the injector or switch is separate.

Managed coverage

• Published planning figures of 140m² coverage and 300+ connected clients, dependent on the site.
• UniFi Network provides coordinated configuration, guest access and radio controls.

Key Features

Use the appropriate radio band for each device

WiFi 7 supports modern clients while the 2.4GHz and 5GHz radios retain connections for compatible older equipment. The 6GHz band gives supported devices another connection option where local regulations permit its use. A client must support the relevant band and features; an older client keeps the capabilities of its own radio.

Provide a suitable wired connection

The single 10GbE uplink carries traffic back to your wired network. A matching switch and suitable cabling help avoid a slower upstream connection becoming the limiting factor when several fast clients are active. Radio link rates describe the wireless connection. Actual internet and application performance also depend on the gateway, internet service, client equipment and radio conditions.

Plan coverage around the actual rooms

The manufacturer’s 140m² and 300+ client figures are planning guidance rather than a guarantee for every building. Walls, metalwork, interference and the traffic generated by each client affect results. Ceiling or wall mounting helps position the access point near the area it serves. Select locations around actual client use and avoid hiding it inside a cabinet.

Manage guest and staff access centrally

UniFi Network supports guest and client isolation, WiFi schedules, rate limits and a configurable captive portal. PPSK and RADIUS-based VLAN assignment provide further ways to organise supported deployments. Roaming assistance and radio management help coordinate multiple access points. Client compatibility, the management application and configuration determine which features are used.

Provide PoE+ power before installation

Power and data share one Ethernet cable, simplifying placement when a suitable PoE+ source is available. Allow for the access point’s maximum draw of 22W and the supplying switch’s overall power budget. An injector is not included. Choose an injector that supports 10GbE data if you intend to retain a 10GbE uplink.

Choose the correct mounting and software

The Lite Mount is included for the standard installation. White requires UniFi Network 9.0.114 or later; Black requires 9.1.120 or later. Keep firmware and the management application current, and select radio channels and widths permitted in the installation country.

Summary

U7-Pro-XG suits a managed network that needs WiFi 7 coverage with a 10GbE wired connection. Match the PoE supply, upstream network and placement to the site’s client and coverage needs.

Ubiquiti U7-Pro-XG WiFi 7 10GbE Access Point

This WiFi 7 access point combines three radio bands with six spatial streams and a single wired uplink. It requires a suitable PoE+ power source and UniFi Network for management. Radio data rates are maximum physical link rates under supported channel widths, firmware, regional settings and client capabilities; they are not internet speed or simultaneous throughput for one client. Coverage and client figures are deployment guidance, affected by layout, interference and workload.