Ubiquiti UACC-PoE++-10G 60W 10GbE PoE++ Injector
60W PoE++ Power Without Sacrificing a 10GbE LinkThe Ubiquiti UACC-PoE++-10G is a mains-powered Ethernet injector for compatible UniFi PoE devices. It adds up to 60W...
Frequently Bought Together
60W PoE++ Power Without Sacrificing a 10GbE Link
The Ubiquiti UACC-PoE++-10G is a mains-powered Ethernet injector for compatible UniFi PoE devices. It adds up to 60W of PoE++ power to an Ethernet connection while providing a multi-gigabit data path up to 10GbE, useful when the available network port does not provide the required PoE power.
Connect the network data feed to the data-input socket and the powered device to the PoE output. The adapter includes an AC power cable with earth ground and supports IEEE 802.3af, 802.3at and 802.3bt Type 3 power standards. Check the device's PoE requirement rather than selecting an injector from data speed alone.
Highlights
- Up to 60W PoE++ output with 10GbE data connectivity.
- IEEE 802.3af/ at/ bt Type 3 support.
- Shielded RJ45 data-input and PoE-output sockets.
- Surge, peak-pulse and overcurrent protection with status LED.
Key Features
Use an Existing Data Port to Power a Compatible Device
A separate injector can power a supported access point or other PoE device without drawing its supply from a switch's PoE budget. The network source must still support the intended Ethernet link speed, and a suitable cable is required between each device.
Check Power Class and Cable Loss
This is a 60W Type 3 PSE, not a 90W Type 4 source. The power available at the remote device is affected by cable loss and the negotiated PoE class. Confirm the exact powered-device requirement, especially for models that specify PoE+++.
Keep a Grounded Power Connection
Use the included grounded AC cable and follow the installation procedure. Built-in protection helps manage specified electrical transients but does not replace proper grounding or installation protection for exposed cable routes.
Plan the Indoor Equipment Location
The compact 106 × 63 × 34mm adapter operates from 100–240V AC at 50/ 60Hz. Keep it within the 0 to 40°C operating range and leave the connectors accessible for inspection and service.
Summary
The UACC-PoE++-10G adds 60W PoE++ capability to a compatible high-speed Ethernet connection. It is suitable when the powered device needs Type 3 power and the installation should retain a 10GbE data path.
Ubiquiti UACC-PoE++-10G 60W 10GbE PoE++ Injector
10GbE-capable PoE injector with up to 60W PSE output. Available power at the powered device depends on PoE class and cable losses.
| Specification | Details |
|---|---|
| Identity and Interfaces | |
| Model | UACC-PoE++-10G |
| Data path | Up to 10GbE multi-gigabit Ethernet |
| Data input / PoE output | Shielded RJ45 sockets |
| Status indication | LED |
| AC power cable | Included with earth ground |
| Power Delivery | |
| Maximum PSE output | 60W |
| Output voltage/ current | 54V DC at 1.12A |
| Supported standards | IEEE 802.3af / 802.3at / 802.3bt Type 3 |
| 4-pair power pins | 1,2,4,5 (+); 3,6,7,8 (-) |
| AC input | 100–240V AC at 50/ 60Hz |
| Maximum input current | 1.5A |
| Inrush current | Less than 150A peak at 230V AC |
| Efficiency | Greater than 88% |
| Electrical Regulation | |
| Switching frequency | 65kHz |
| Maximum output ripple | 1% |
| Line regulation | ≤2% |
| Load regulation | ≤5% |
| Protection | |
| Protection functions | Surge / peak-pulse / overcurrent |
| Clamping | 11V data / 60V power |
| Maximum surge discharge | 1500A (8/ 20µs) power |
| Peak-pulse current | 36A (10/ 1000µs) data |
| Response time | Less than 1ns |
| Shunt capacitance | Less than 5pF data |
| Surge mode | Differential and common mode |
| Mechanical and Environment | |
| Dimensions | 106 × 63 × 34mm |
| Product weight | 210g |
| Operating temperature | 0 to 40°C |
| Storage temperature | -30 to 70°C |
| Operating humidity | 10 to 95% noncondensing |
| Manufacturer certifications | CE / FCC / IC / UL / UKCA / KC / CCC / RoHS |