Ubiquiti UniFi USW-Industrial-DIN-2.5G-8-PoE 240W Switch

Bring Multi-Gigabit PoE to compact industrial cabinets

The Ubiquiti UniFi USW-Industrial-DIN-2.5G-8-PoE combines four 2.5GbE copper ports, four Gigabit copper ports and two 10G SFP+ uplinks in an industrial switch with DIN rail and wall mounting. All eight copper ports support PoE++, with a published total PoE budget of 240W. Dual external DC inputs and an alarm relay provide options for installations that need power redundancy and external monitoring.

Highlights

Mixed-speed copper connectivity

• Four 2.5GbE ports for compatible Multi-Gigabit devices.
• Four GbE ports for Gigabit equipment.

PoE++ across eight ports

• 240W maximum shared PoE budget.
• Separate suitably rated DC power supply required.

Faster uplinks

• Two 10G SFP+ ports for compatible fibre or direct-attach links.
• USB-C console connection for local access.

Industrial installation features

• Fanless metal enclosure with DIN rail and wall mounting.
• Dual DC input terminals, dry-contact alarm relay and grounding point.

Key Features

Allocate the four Multi-Gigabit ports deliberately

Connect suitable higher-bandwidth equipment to the four 2.5GbE ports and use the four GbE ports for devices with Gigabit connections. This is a mixed-speed eight-port switch, so the intended port matters when planning each connection. The connected device and cable must also support the required speed.

Plan the shared PoE budget around actual loads

All eight copper ports support PoE++, but the 240W total budget is shared across the installation. Add the requirements of the connected PoE devices and allow for their operating needs. Do not treat the total budget as the power available from every individual port.

Select the external DC supply before ordering

A power supply is not included. For full PoE++ output, Ubiquiti specifies a 44–57V DC supply rated 265W or higher. Select a supply appropriate for the required load, installation environment and terminal connections. A normal rack-switch power module is not automatically a compatible supply for this switch.

Use dual power inputs and external monitoring

Two 2-pin DC input terminal blocks support a redundant power arrangement. The dry-contact relay provides an interface for external alarm monitoring. Plan the power sources and monitoring circuit as part of the cabinet design; detailed relay ratings and behaviour should be confirmed before connecting third-party equipment.

Choose suitable 10G uplink accessories

The two SFP+ ports provide 10G uplink connections. Select compatible transceivers, fibre or direct-attach cables for the peer device and link distance. Check accessory temperature ratings separately; ordinary indoor optics should not be assumed suitable for every industrial cabinet or outdoor installation.

Position the switch for access and cable routing

The fanless enclosure can be mounted on DIN rail or a wall. Ubiquiti describes left, right and rear DIN mounting positions for this family, helping installers plan around cabinet space and cable routes. Allow room for copper plugs, fibre bends, top-mounted power terminals and access to the grounding point.

Plan management and local service access

The switch belongs to the UniFi managed switching family. A USB-C console port and reset button are shown in the official hardware diagram. Confirm the supported software release and your UniFi management arrangement before commissioning.

Confirm the pre-order terms

The displayed selling price is an ACE provisional estimate pending official pricing and supply confirmation. Singapore availability and delivery timing remain unconfirmed. Confirm the local ETA and external power supply requirements before relying on the product for a scheduled installation.

Summary

Choose this industrial DIN switch when a compact installation needs four Multi-Gigabit PoE connections, four Gigabit PoE connections and dual 10G uplinks. Plan the separate DC supply, shared PoE load, mounting arrangement and pre-order timing together.

Ubiquiti UniFi USW-Industrial-DIN-2.5G-8-PoE 240W Switch

The USW-Industrial-DIN-2.5G-8-PoE provides eight PoE++ copper connections split between four 2.5GbE ports and four GbE ports, with two 10G SFP+ uplinks. Its industrial enclosure supports DIN rail or wall mounting and includes dual DC inputs, an alarm relay and a USB-C console port. Full PoE output depends on a separate 44–57V DC power supply rated at least 265W. Plan the connected loads, cabinet layout, uplink accessories and pre-order delivery requirements before installation.