Ubiquiti USL-FOB - Front alarm-control faceplate
Ubiquiti USL-FOB - Angled front view with side button
Ubiquiti USL-FOB - Right side programmable button
Ubiquiti USL-FOB - Left side programmable button
Ubiquiti USL-FOB - Rear angled view
Ubiquiti USL-FOB - Rear cover
Ubiquiti USL-FOB - CR2450 battery compartment
Ubiquiti USL-FOB - Open battery compartment
Ubiquiti USL-FOB - Numeric faceplate with buttons 1 to 4
Ubiquiti USL-FOB - Angled numeric faceplate view
Ubiquiti USL-FOB - Alarm controls and dimensions drawing
Ubiquiti USL-FOB - Battery and reset button diagram
Ubiquiti USL-FOB - Attached to keys on a desk
Ubiquiti USL-FOB - Alarm-control faceplate on a desk
Ubiquiti USL-FOB - SuperLink network topology; gateway and console sold separately
Ubiquiti USL-FOB - Remote and interchangeable faceplates

Ubiquiti USL-FOB SuperLink Remote Control KeyFob

Quick UniFi Controls from a Pocket Remote The Ubiquiti USL-FOB is a compact SuperLink remote for configured actions within a UniFi deployment. Four front buttons...

$68.45 SGD $59.64 SGD SAVE $8.81 SGD

american expressapple paygoogle paymasterpaypalshopify payvisa
Vendor: Ubiquiti
SKU: USL-FOB
Barcode:
Availability : In Stock Pre order Out of stock
Description

Quick UniFi Controls from a Pocket Remote

The Ubiquiti USL-FOB is a compact SuperLink remote for configured actions within a UniFi deployment. Four front buttons and two side buttons give users quick access to alarm controls or other programmed functions without opening the mobile app. The primary faceplate provides arm, disarm, night mode and panic controls, while the included numeric faceplate suits custom assignments. A replaceable CR2450 battery powers the remote. A compatible SuperLink Gateway and UniFi Protect 7.1 are required separately.

Highlights

Actions at Your Fingertips

  • Four front buttons and two programmable side buttons.
  • Alarm-control and numeric faceplate options.

SuperLink Connection

  • Proprietary long-range wireless connection to a SuperLink Gateway.
  • Rated range up to 2KM, subject to the installation.

Long-Life Battery Power

  • Replaceable CR2450 lithium battery.
  • Manufacturer-rated battery life up to 10 years.

Key Features

Arm and Disarm with a Button

The primary faceplate labels the front buttons for arm, disarm, night mode and panic. Configure the permitted actions in the UniFi installation so users can perform the tasks they need quickly. Button behaviour depends on the configured automation and connected equipment.

Assign Custom Functions

The secondary faceplate uses buttons numbered 1–4, with two additional side buttons available for programmable functions. This supports a simple physical control layout for the site's chosen actions. It is a SuperLink remote, rather than an NFC door-access credential.

Match the Gateway and Radio Region

USL-FOB communicates through a compatible SuperLink Gateway and requires UniFi Protect 7.1. The remote and gateway must use matching regional radio versions. Check that pairing before ordering; the gateway and Protect console are separate equipment.

Plan for Real Wireless Conditions

Ubiquiti rates maximum SuperLink range at up to 2KM. Walls, obstacles and local interference can reduce usable coverage. Test the intended operating areas as part of the installation rather than treating the maximum figure as a guaranteed indoor range.

Replace the Battery When Needed

The CR2450 lithium battery is replaceable, with battery life rated up to 10 years under the manufacturer's conditions. Actual life depends on use and environment. Status and signal LEDs provide feedback during operation.

Summary

USL-FOB adds convenient physical controls to a suitable UniFi Protect and SuperLink setup. Choose the matching radio region, programme the required actions and verify coverage where the remote will be used.

Specs

Ubiquiti USL-FOB SuperLink Remote Control KeyFob

The Ubiquiti USL-FOB is a compact SuperLink remote for configured actions within a UniFi deployment. Four front buttons and two side buttons give users quick access to alarm controls or other programmed functions without opening the mobile app. The primary faceplate provides arm, disarm, night mode and panic controls, while the included numeric faceplate suits custom assignments. A replaceable CR2450 battery powers the remote. A compatible SuperLink Gateway and UniFi Protect 7.1 are required separately.

Specification Details
Controls and Connectivity
Wireless system SuperLink proprietary connection
Maximum rated range Up to 2KM; installation conditions affect coverage
Front buttons 4; primary faceplate: arm, disarm, night mode and panic
Alternative faceplate Numeric buttons 1–4 for programmed functions
Side buttons 2 programmable buttons
Indicators Status LED and signal LED
Setup requirements Compatible regional SuperLink Gateway and UniFi Protect 7.1
Radio-region matching Remote and gateway must use compatible regional versions
Power
Battery 1 × replaceable CR2450 lithium battery
Voltage 3V
Rated battery life Up to 10 years; actual life depends on use
Maximum power consumption 150mW
Nominal battery capacity 600 mAh
Maximum pulse current 50 mA
Physical and Operating Conditions
Dimensions 67 × 35 × 18.5 mm
Device weight 32 g
Enclosure Polycarbonate
Operating temperature 0 to 40 °C
Operating humidity 10–90%, non-condensing
Certifications CE, FCC, IC and UL 4200A
NDAA Manufacturer-declared compliant
Supply
Included Remote with CR2450 battery and interchangeable alarm-control/numeric faceplates
Required separately Matching SuperLink Gateway and compatible UniFi Protect console

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)