Ubiquiti UACC-AI-MS-2-WS Camera Weather Shield
Give Outdoor Dual-Sensor Coverage a Considered Finish Complete an outdoor AI Multi Sensor 2 installation with a shield shaped specifically for its enclosure. The Ubiquiti Camera Weather Shield is designed to help protect the camera from the elements and support image quality when it is installed on a wall or pole. Its white exterior, dark inner surface and lightweight polycarbonate construction form a purposeful addition to the matching camera without replacing its mounting hardware or installation requirements. Highlights Designed for Outdoor Camera Placement Dedicated accessory for the UVC-AI-MS-2 AI Multi Sensor 2 camera. Manufacturer describes use with outdoor wall or pole installations. A Shaped Protective Canopy Polycarbonate enclosure with aluminium-alloy mounting material. 227.5 × 128.8 × 61.5 mm; product weight 94 g. Keep the Installation Complete Camera and wall or pole mounting arrangement are separate. Follow the camera’s environmental limits and sealing instructions. Key Features Add Protection Where the Camera Is Exposed The shaped shield is intended to help protect the AI Multi Sensor 2 from the elements in an outdoor wall or pole installation. It supplements the camera’s enclosure rather than creating a new environmental rating. Plan the camera’s orientation, exposure and cable entry around the actual location. Use the Accessory Shaped for the Camera The shield follows the matching dual-sensor enclosure instead of relying on a generic cover. Its canopy sits above the camera’s front, as shown in the manufacturer’s installation images. Compatibility is specific to the AI Multi Sensor 2 and should not be extended to another camera by appearance alone. Support a Clear, Unobstructed View The manufacturer positions the shield as an accessory for optimal outdoor image quality as well as protection from the elements. Install it in the illustrated orientation and confirm that the camera’s final view remains clear. It is not a replacement lens, and it does not change resolution or optical specifications. Keep the Added Mass Modest At a published 94 g, the shield is a lightweight addition to the camera assembly. The enclosure is polycarbonate and its listed mounting material is aluminium alloy. Account for the complete camera and mount when assessing the support; this accessory’s weight is not the weight of the whole installation. Finish the Whole Outdoor Connection The shield does not replace a suitable wall or pole mount, properly protected Ethernet entry or the camera’s environmental installation instructions. Secure the camera and its cable arrangement first, fit the shield as directed and verify the resulting image. The camera and other mounting accessories are separate. Summary The AI Multi Sensor 2 Camera Weather Shield is a dedicated finishing accessory for an outdoor wall or pole installation. Its value is in matching the camera’s shape while adding protection from the elements. Pair it with the right camera and mounting arrangement, and retain the camera’s full installation and sealing requirements. Frequently Asked Questions Which Camera Does the Shield Fit?ExpandCollapse It is specified for the UVC-AI-MS-2 AI Multi Sensor 2 camera. It is not a universal weather cover for other UniFi camera models. Does It Include the Camera or Wall Mount?ExpandCollapse No. This listing supplies the weather-shield accessory. The camera and the wall or pole mounting arrangement are separate. Can It Be Used Outdoors?ExpandCollapse Yes. The manufacturer describes the shield for the AI Multi Sensor 2 when installed outdoors on a wall or pole. Follow the camera’s own operating limits and the manufacturer’s installation instructions. Does It Give the Camera a New Waterproof Rating?ExpandCollapse No additional camera IP rating is promised by this listing. The shield supplements the installation; the camera’s stated environmental rating, cable-entry protection and sealing instructions still apply. What Are the Shield’s Materials and Weight?ExpandCollapse The enclosure is polycarbonate, the listed mounting material is aluminium alloy, and the shield weighs 94 g. The exterior finish is white.
Add-ons (1)
Pickup available at 3005, Ubi Avenue 3, #01-88
Usually ready in 2-4 Business Day (Excluding Public Holiday)
Ubiquiti UACC-AI-MS-2-WS Camera Weather Shield
Description
Give Outdoor Dual-Sensor Coverage a Considered Finish
Complete an outdoor AI Multi Sensor 2 installation with a shield shaped specifically for its enclosure. The Ubiquiti Camera Weather Shield is designed to help protect the camera from the elements and support image quality when it is installed on a wall or pole. Its white exterior, dark inner surface and lightweight polycarbonate construction form a purposeful addition to the matching camera without replacing its mounting hardware or installation requirements.
Highlights
Designed for Outdoor Camera Placement
- Dedicated accessory for the UVC-AI-MS-2 AI Multi Sensor 2 camera.
- Manufacturer describes use with outdoor wall or pole installations.
A Shaped Protective Canopy
- Polycarbonate enclosure with aluminium-alloy mounting material.
- 227.5 × 128.8 × 61.5 mm; product weight 94 g.
Keep the Installation Complete
- Camera and wall or pole mounting arrangement are separate.
- Follow the camera’s environmental limits and sealing instructions.
Key Features
Add Protection Where the Camera Is Exposed
The shaped shield is intended to help protect the AI Multi Sensor 2 from the elements in an outdoor wall or pole installation. It supplements the camera’s enclosure rather than creating a new environmental rating. Plan the camera’s orientation, exposure and cable entry around the actual location.
Use the Accessory Shaped for the Camera
The shield follows the matching dual-sensor enclosure instead of relying on a generic cover. Its canopy sits above the camera’s front, as shown in the manufacturer’s installation images. Compatibility is specific to the AI Multi Sensor 2 and should not be extended to another camera by appearance alone.
Support a Clear, Unobstructed View
The manufacturer positions the shield as an accessory for optimal outdoor image quality as well as protection from the elements. Install it in the illustrated orientation and confirm that the camera’s final view remains clear. It is not a replacement lens, and it does not change resolution or optical specifications.
Keep the Added Mass Modest
At a published 94 g, the shield is a lightweight addition to the camera assembly. The enclosure is polycarbonate and its listed mounting material is aluminium alloy. Account for the complete camera and mount when assessing the support; this accessory’s weight is not the weight of the whole installation.
Finish the Whole Outdoor Connection
The shield does not replace a suitable wall or pole mount, properly protected Ethernet entry or the camera’s environmental installation instructions. Secure the camera and its cable arrangement first, fit the shield as directed and verify the resulting image. The camera and other mounting accessories are separate.
Summary
The AI Multi Sensor 2 Camera Weather Shield is a dedicated finishing accessory for an outdoor wall or pole installation. Its value is in matching the camera’s shape while adding protection from the elements. Pair it with the right camera and mounting arrangement, and retain the camera’s full installation and sealing requirements.
Frequently Asked Questions
Which Camera Does the Shield Fit?
It is specified for the UVC-AI-MS-2 AI Multi Sensor 2 camera. It is not a universal weather cover for other UniFi camera models.
Does It Include the Camera or Wall Mount?
No. This listing supplies the weather-shield accessory. The camera and the wall or pole mounting arrangement are separate.
Can It Be Used Outdoors?
Yes. The manufacturer describes the shield for the AI Multi Sensor 2 when installed outdoors on a wall or pole. Follow the camera’s own operating limits and the manufacturer’s installation instructions.
Does It Give the Camera a New Waterproof Rating?
No additional camera IP rating is promised by this listing. The shield supplements the installation; the camera’s stated environmental rating, cable-entry protection and sealing instructions still apply.
What Are the Shield’s Materials and Weight?
The enclosure is polycarbonate, the listed mounting material is aluminium alloy, and the shield weighs 94 g. The exterior finish is white.
Specs
Ubiquiti UACC-AI-MS-2-WS Camera Weather Shield
This weather shield is designed for the AI Multi Sensor 2 camera in outdoor wall or pole installations. Its shaped polycarbonate enclosure adds protection from the elements while preserving the intended camera view when fitted as directed. The accessory weighs 94 g and uses aluminium-alloy mounting material. It supplements the camera and suitable mounting hardware rather than replacing their environmental, cable-entry or support requirements. The camera is supplied separately.
| Specification | Details |
|---|---|
| Compatibility and Intended Use | |
| Supported Camera | UVC-AI-MS-2 AI Multi Sensor 2 |
| Intended Location | Outdoor wall or pole camera installations |
| Purpose | Protection from the elements and support for outdoor image quality |
| Environmental Qualification | Retain the camera’s own operating limits and sealing instructions; no new IP rating is claimed |
| Construction | |
| Dimensions | 227.5 × 128.8 × 61.5 mm |
| Product Weight | 94 g |
| Enclosure Material | Polycarbonate |
| Mounting Material | Aluminium alloy |
| Exterior Colour | White |
| Package and Installation | |
| Supplied Accessory | Dedicated camera weather shield |
| Camera and Primary Mount | Supplied separately |
| Installation Check | Fit in the illustrated orientation, secure the assembly and confirm a clear live view |
Add-ons
