Ubiquiti UA-G2-SK G2 Door Access Starter Kit
Essential Door Access Starter Kit for Secure Entry The Ubiquiti UA-G2-SK G2 Door Access Starter Kit provides an efficient and secure solution for managing access...
Description
Essential Door Access Starter Kit for Secure Entry
The Ubiquiti UA-G2-SK G2 Door Access Starter Kit provides an efficient and secure solution for managing access to a single door. This starter kit includes everything you need to quickly set up a robust access control system with one reader and ten access cards, ensuring a smooth and reliable entry experience.
Highlights
- All-in-One Access Control Kit: Includes a Door Hub, G2 Reader, and ten Access Cards for a complete access solution.
- Easy Setup: Designed for quick installation, providing all necessary components for controlling a single door.
- Advanced NFC Technology: Offers secure and reliable access with state-of-the-art NFC technology.
Key Features
-
Comprehensive Starter Kit
- Door Hub: Manages and controls access points, providing centralized security for the connected door.
- G2 Reader: A sleek and efficient reader for entry management, compatible with the Door Hub for seamless operation.
- 10 Access Cards: Comes with ten pre-configured NFC cards, ready to assign to users for immediate access control.
-
Secure NFC Technology
- Multiple NFC Standards: Supports ISO 14443A/B, 15693, MIFARE Classic, MIFAREPlus, MIFARE DESFire, and more, ensuring compatibility with a wide range of NFC-enabled devices.
- NFC Read Range: Up to 30 mm, providing quick and easy access for authorized personnel.
-
Reliable Networking and Power
- Networking Interface: Features 5× 10/100/1000 Base-T ports for stable and fast network connectivity.
- PoE++ Powered: Simplifies installation by providing power over Ethernet (PoE++), reducing the need for additional power supplies.
- Efficient Power Consumption: Operates efficiently with a maximum power consumption of 50W (with PoE output).
Specifications
| Specification | Details |
|---|---|
| Networking Interface | 5× 10/100/1000 Base-T ports |
| Power Method | PoE++ |
| Max. Power Consumption | Without PoE output: 30W, With PoE output: 50W |
| NFC Frequency | 13.56 MHz |
| NFC Read Range | < 30 mm |
| NFC Standards | ISO 14443A/B, 15693 |
| NFC Technology | NFC Tag 1, 2, 3, 4, 5, MIFARE Classic, MIFAREPlus, MIFARE Ultralight, MIFARE DESFire |
| Operating Environment | Outdoor use |
Summary
The Ubiquiti UA-G2-SK G2 Door Access Starter Kit is an ideal solution for those looking to establish a secure and efficient access control system. With its easy installation process and comprehensive components, this kit ensures that your premises are protected with cutting-edge NFC technology, providing peace of mind for single-door entry management.
Specs
Ubiquiti UA-G2-SK G2 Door Access Starter Kit Specifications
| UA-Hub-Door | |
|---|---|
| MECHANICAL | |
| Dimensions | 174.9 x 126 x 32.9 mm (6.9 x 5 x 1.3") |
| Weight | 363 g (12.8 oz) |
| Enclosure Material | Polycarbonate |
| Mounting Material | Polycarbonate |
| HARDWARE | |
| Networking Interface | (5) 10/100/1000 Base-T |
| Power Method | PoE++ |
| UL 294 Power-Limited Class 2 PSU | UL 60950/62368 LPS/PS2 PSU |
| Max. Power Consumption | Without PoE output: 30W, With PoE output: 50W |
| PoE Input | 50V DC, 1A |
| PoE Output | PoE passthrough, (4) PoE, 50V DC, total 20W |
| Button | (1) Factory-reset |
| Digital Input | Request to exit/request to enter/remote release/door position sensor |
| Dry Output Relay | Lock: 30V DC, 1A, Aux: 30V DC, 1A |
| Powered Output Relay | Lock: 12V DC, 1A, Aux: 12V DC, 0.33A |
| Operating Environment | Indoor use only |
| Ambient Operating Temperature | 0 to 40° C (32 to 104° F) |
| Ambient Operating Humidity | 5 to 95% noncondensing |
| UL 294 Level | Destructive attack: Level I, Line security: Level I, Endurance: Level I, Standby power: Level I |
| UL 294 Statement | Compliance with IEEE 802.3 (at or af) specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits. |
| CAN/ULC-60839-11-1 Grade | Grade assignment: 1 |
| Certifications | CE, FCC, IC, UL 294, CAN/ULC-60839-11-1 |
| Document Number | UA-Hub-Door002, V01 |
| Wiring Information | Wiring gauge requirements (AWG): UACC-Cable-DoorLockRelay (18 AWG) is recommended. |
| PoE Cabling Requirements | The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 24 AWG (0.21 mm²) for horizontal or riser cable. |
| LEDs | PoE in: Steady white: Pending adoption, Steady blue: Adopted, Alternating white/blue: Firmware updating; PoE out: Blinking white: Active signal; Input terminals: Blinking white: Active signal; Output relays: Blinking white: Relay triggered |
| UA-G2 | |
|---|---|
| MECHANICAL | |
| Dimensions | 93 x 40 x 36.5 mm (3.7 x 1.6 x 1.4") |
| Weight | 82 g (2.9 oz) |
| Enclosure Material | Polycarbonate, glass |
| Mounting | In wall, gang box |
| Weatherproofing | IP55 |
| HARDWARE | |
| Networking Interface | (1) 10/100 MbE RJ45 port |
| Connectivity | BLE 4.1 |
| Power Method | PoE |
| UL 294 Power-Limited Class 2 PSU | UL 60950-1/62368-1 LPS/PS2 PSU |
| Supported Voltage Range | 48V DC |
| Max. Power Consumption | 5W |
| ESD/EMP Protection | Air: ±15kV, contact: ±8kV |
| Sensors | Proximity sensor |
| Speaker | (1) 8 ohm, 0.7W |
| LEDs | Steady white: Pending adoption, Steady blue: Adopted, Alternating white/blue: Firmware updating, Strobing red: Emergency lockdown, Steady green: Emergency evacuation, (2) Rapid flashing blue: NFC credential authenticated, (2) Rapid flashing red: NFC credential authentication failed, Breathing blue: Ready to register NFC cards |
| Button | (1) Factory-reset |
| NFC Frequency | 13.56 MHz |
| NFC Read Range | < 30 mm |
| NFC Standards | ISO 14443A, 14443B, 15693 |
| NFC Technology | NFC Tag 1,2,3,4,5, MIFARE Classic, MIFAREPlus, MIFARE Ultralight, MIFARE DESFire |
| Operating Environment | Outdoor use |
| Ambient Operating Temperature | -30 to 45° C (-22 to 113° F) |
| Ambient Operating Humidity | 5 to 90% noncondensing |
| UL 294 Level | Destructive attack: Level I, Line security: Level I, Endurance: Level I, Standby power: Level I |
| UL 294 Statement | Compliance with IEEE 802.3 specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits. |
| PoE Cabling Requirements | Cable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site. The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm²) for patch cords; 24 AWG (0.21 mm²) for horizontal or riser cable. |
| CAN/ULC-60839-11-1 Grade | Grade assignment: I |
| Certifications | CE, FCC, IC, UL 294, CAN/ULC-60839-11-1 |
| Document Number | UA-G2/UA-G2-Black, V02 |
| UA-Card | |
|---|---|
| MECHANICAL | |
| Dimensions | 85.6 x 53.98 x 0.84 mm (3.37 x 2.13 x 0.03") |
| Weight | 5 g (0.18 oz) |
| Format | ISO 7810 ID-1 |
| NFC Frequency | 13.56 MHz |
| NFC Technology | ISO/IEC 14443 Type A, MIFARE DESFire, UniFi Access Proprietary Security Protocol |
Ubiquiti UA-G2-SK G2 Door Access Starter Kit