TP-Link TL-SL1311P 8-Port 10/100 Mbps PoE+ Switch with 3 Gigabit Uplinks
Power Eight PoE Devices with Dedicated Gigabit Uplinks The TP-Link TL-SL1311P combines eight 10/100 Mbps PoE+ ports with two Gigabit RJ45 uplinks and one Gigabit...
Power Eight PoE Devices with Dedicated Gigabit Uplinks
The TP-Link TL-SL1311P combines eight 10/100 Mbps PoE+ ports with two Gigabit RJ45 uplinks and one Gigabit SFP slot. Its 65W shared PoE budget suits compatible cameras, access points and IP phones, while a fanless metal enclosure and physical mode switches keep everyday installation straightforward.
Highlights
Eight powered access ports
- IEEE 802.3af/at PoE+, up to 30W per port within the shared 65W budget.
- Access ports operate at up to 100 Mbps.
Three Gigabit uplinks
- Two Gigabit RJ45 ports and one Gigabit SFP slot.
- SFP transceiver sold separately.
Practical surveillance features
- Extend mode, port isolation and PoE Auto Recovery.
- Fanless desktop or wall-mounted installation.
Key Features
Plan the total PoE load
The eight ports share 65W; they cannot all provide 30W simultaneously. Prioritisation preserves power to lower-numbered ports if the total demand exceeds the budget.
Keep uplinks separate
Use the two Gigabit copper ports and Gigabit SFP slot for uplink connections. The powered access ports remain 10/100 Mbps, which should be considered for higher-bandwidth devices.
Extend selected camera links
Extend mode supports data and power up to 250M on the selected ports at 10 Mbps. Actual reach depends on cabling and the powered device, so confirm the installation requirements.
Use isolation and recovery when appropriate
Isolation separates downlink traffic while allowing communication with uplink ports. PoE Auto Recovery can restart unresponsive devices; disable it during powered-device firmware upgrades or when sleep behaviour would trigger unwanted resets.
Install without a controller
This unmanaged switch works without software configuration or an Omada controller. Use the included external power adapter and the physical switches to select the required operating modes.
Summary
TL-SL1311P suits practical PoE deployments that need eight Fast Ethernet access ports, a 65W power budget and separate Gigabit uplinks in a quiet enclosure.
TP-Link TL-SL1311P 8-Port 10/100 Mbps PoE+ Switch with 3 Gigabit Uplinks
The TP-Link TL-SL1311P is an unmanaged desktop switch with eight 10/100 Mbps PoE+ access ports and three Gigabit uplinks. Two uplinks use RJ45 and one uses an SFP slot. The shared 65W PoE budget supports IEEE 802.3af/at devices, while physical controls enable extended-distance operation, isolation and automatic PoE recovery. Its fanless enclosure can be placed on a desktop or wall, with power provided by the included external adapter.
| Specification | Details |
|---|---|
| Ports and PoE | |
| PoE+ access ports | 8 × 10/100 Mbps RJ45; ports 1–8 |
| Copper uplinks | 2 × 10/100/1000 Mbps RJ45 |
| Fibre uplink | 1 × 1000 Mbps SFP slot |
| PoE standards | IEEE 802.3af / 802.3at |
| Total PoE budget | 65W shared |
| Maximum PoE per port | 30W, subject to total power budget |
| PoE overload handling | Lower-numbered ports have higher power priority |
| Auto-negotiation / Auto MDI/MDIX | Supported |
| Switching and Controls | |
| Switching capacity | 7.6 Gbps |
| Packet forwarding rate | 5.6544 Mpps |
| MAC address table | 2K; automatic learning and ageing |
| Jumbo frames | 16 KB |
| Forwarding method | Store-and-forward |
| Flow control | IEEE 802.3x full duplex; backpressure half duplex |
| Extend mode | Up to 250M at 10 Mbps on selected ports; distance depends on cable and device |
| Isolation mode | Downlink ports separated; communication with uplinks remains available |
| PoE Auto Recovery | Automatically restarts an unresponsive powered device when enabled |
| Management | Unmanaged; physical mode switches; no controller required |
| Power and Physical | |
| Power adapter input | 100–240 V AC, 50/60 Hz |
| Power adapter output | 53.5 V DC, 1.31 A |
| Consumption without powered devices | 5.61W at 220 V / 50 Hz |
| Consumption with 65W powered-device load | 77.32W at 110 V / 50 Hz |
| Dimensions (W × D × H) | 209 × 126 × 26 mm |
| Enclosure / cooling | Metal; fanless |
| Mounting | Desktop or wall |
| Wall-mount hole spacing | 150 mm |
| Physical security lock | Supported |
| Package contents | TL-SL1311P, power adapter, installation guide |
| Optional fibre accessory | Compatible Gigabit SFP transceiver; sold separately |
| Certifications | CE, FCC, RoHS |
| Environment and Warranty | |
| Operating temperature | 0 °C to 40 °C |
| Storage temperature | −40 °C to 70 °C |
| Operating humidity | 10–90% RH, non-condensing |
| Storage humidity | 5–90% RH, non-condensing |
| Warranty | 5 years, as listed by the local supplier |