TP-Link Tapo RV50 Omni Robot Vacuum and Mop with Self Cleaning Station
Floor cleaning with more of the routine handled at the dock Tapo RV50 Omni combines LiDAR-guided vacuuming, dual spinning mops and a station that handles dust emptying, mop washing and warm-air drying. It is designed for a regular mixed-floor cleaning routine, with app maps, room selection and controls for carpeted areas. Up to 12,000 Pa suction supports everyday dry debris, while the mop system works on suitable hard floors. The station reduces repetitive handling, with clean-water refilling, dirty-water emptying and scheduled maintenance still part of ownership. Highlights Vacuum and scrub Up to 12,000 Pa suction with five levels. Dual spinning mops and carpet-aware controls. An all-in-one station Automatic dust emptying and mop washing. 50°C warm-air mop drying. Mapped daily routines dToF LiDAR navigation and app room control. Recharge/resume and supported Matter integration. Key Features Bring vacuuming and mopping into one routine The RV50 Omni combines dry-debris collection with dual spinning mops. Choose the cleaning mode and suction level for the surface, then set suitable routines in the app. The maximum 12,000 Pa rating is a published test figure; actual pickup depends on debris, flooring and maintenance. Let the station handle repeated tasks The Omni dock empties collected dust into a 3-litre bag, washes the mop pads and dries them with 50°C warm air. Separate 5-litre clean-water and 4-litre dirty-water tanks support the washing routine. Refill and empty the tanks as needed, and clean the tray and water paths as instructed. Plan around hard floors and carpets Supported automatic mop removal and mop lifting help separate wet cleaning from carpeted areas. Set appropriate no-go or cleaning zones and review the robot behaviour on your own rugs. This standard Omni model does not use the Pro model’s adaptive extending mop arm. Use a mapped cleaning plan dToF LiDAR navigation supports room maps and selected cleaning areas. Schedule regular passes, choose zones and allow the robot to return for charging when required. Keep loose leads and unsuitable objects out of the route, and use a physical barrier where the location requires one. Keep consumables and water care straightforward Maintain the brush, side brush, filter, mop pads and dock bag according to condition and app reminders. RV50-series maintenance consumables and the RVA420 deodorising modules are available separately. Use only a cleaning solution explicitly approved for this model; the Pro model’s bottle is not automatically the correct choice for the standard Omni. Summary Tapo RV50 Omni is a practical step towards a more automated floor-care routine, combining mapped vacuuming and spinning-mop cleaning with a washing and drying station. Choose it for the standard Omni feature set, plan around the floor surfaces and keep up with water-tank and consumable care. Frequently Asked Questions How is RV50 Omni different from RV50 Pro Omni?ExpandCollapse The standard RV50 Omni has a published maximum of 12,000 Pa. It does not have the Pro model’s adaptive extending mop arm. Compare the exact model rather than assuming every RV50 feature is shared. What does the station do automatically?ExpandCollapse It empties dust, washes the mop pads and dries them with 50°C warm air. You still refill clean water, empty dirty water, replace the dust bag and clean the station as instructed. Can it clean around carpets?ExpandCollapse It supports automatic mop removal and lifting controls. Set the app’s carpet and zone options for your own rugs and check the first cleaning runs. Which replacement accessories fit?ExpandCollapse The manufacturer lists RV50-series maintenance parts including RVA110, RVA210, RVA310, RVA520 and RVA420 for this model. Match any cleaning solution to the standard RV50 Omni; the Pro bottle is a different item. What network and warranty apply?ExpandCollapse It uses 2.4GHz WiFi, with Bluetooth for setup. The warranty is 18 months for the robot, with 6 months for the battery. Match the supplied regional mains version to the destination.
Add-ons (5)
Pickup available at 3005, Ubi Avenue 3, #01-88
Usually ready in 2-4 Business Day (Excluding Public Holiday)
TP-Link Tapo RV50 Omni Robot Vacuum and Mop with Self Cleaning Station
Description
Floor cleaning with more of the routine handled at the dock
Tapo RV50 Omni combines LiDAR-guided vacuuming, dual spinning mops and a station that handles dust emptying, mop washing and warm-air drying. It is designed for a regular mixed-floor cleaning routine, with app maps, room selection and controls for carpeted areas. Up to 12,000 Pa suction supports everyday dry debris, while the mop system works on suitable hard floors. The station reduces repetitive handling, with clean-water refilling, dirty-water emptying and scheduled maintenance still part of ownership.
Highlights
Vacuum and scrub
- Up to 12,000 Pa suction with five levels.
- Dual spinning mops and carpet-aware controls.
An all-in-one station
- Automatic dust emptying and mop washing.
- 50°C warm-air mop drying.
Mapped daily routines
- dToF LiDAR navigation and app room control.
- Recharge/resume and supported Matter integration.
Key Features
Bring vacuuming and mopping into one routine
The RV50 Omni combines dry-debris collection with dual spinning mops. Choose the cleaning mode and suction level for the surface, then set suitable routines in the app. The maximum 12,000 Pa rating is a published test figure; actual pickup depends on debris, flooring and maintenance.
Let the station handle repeated tasks
The Omni dock empties collected dust into a 3-litre bag, washes the mop pads and dries them with 50°C warm air. Separate 5-litre clean-water and 4-litre dirty-water tanks support the washing routine. Refill and empty the tanks as needed, and clean the tray and water paths as instructed.
Plan around hard floors and carpets
Supported automatic mop removal and mop lifting help separate wet cleaning from carpeted areas. Set appropriate no-go or cleaning zones and review the robot behaviour on your own rugs. This standard Omni model does not use the Pro model’s adaptive extending mop arm.
Use a mapped cleaning plan
dToF LiDAR navigation supports room maps and selected cleaning areas. Schedule regular passes, choose zones and allow the robot to return for charging when required. Keep loose leads and unsuitable objects out of the route, and use a physical barrier where the location requires one.
Keep consumables and water care straightforward
Maintain the brush, side brush, filter, mop pads and dock bag according to condition and app reminders. RV50-series maintenance consumables and the RVA420 deodorising modules are available separately. Use only a cleaning solution explicitly approved for this model; the Pro model’s bottle is not automatically the correct choice for the standard Omni.
Summary
Tapo RV50 Omni is a practical step towards a more automated floor-care routine, combining mapped vacuuming and spinning-mop cleaning with a washing and drying station. Choose it for the standard Omni feature set, plan around the floor surfaces and keep up with water-tank and consumable care.
Frequently Asked Questions
How is RV50 Omni different from RV50 Pro Omni?
The standard RV50 Omni has a published maximum of 12,000 Pa. It does not have the Pro model’s adaptive extending mop arm. Compare the exact model rather than assuming every RV50 feature is shared.
What does the station do automatically?
It empties dust, washes the mop pads and dries them with 50°C warm air. You still refill clean water, empty dirty water, replace the dust bag and clean the station as instructed.
Can it clean around carpets?
It supports automatic mop removal and lifting controls. Set the app’s carpet and zone options for your own rugs and check the first cleaning runs.
Which replacement accessories fit?
The manufacturer lists RV50-series maintenance parts including RVA110, RVA210, RVA310, RVA520 and RVA420 for this model. Match any cleaning solution to the standard RV50 Omni; the Pro bottle is a different item.
What network and warranty apply?
It uses 2.4GHz WiFi, with Bluetooth for setup. The warranty is 18 months for the robot, with 6 months for the battery. Match the supplied regional mains version to the destination.
Specs
TP-Link Tapo RV50 Omni Robot Vacuum and Mop with Self Cleaning Station
TP-Link Tapo RV50 Omni Robot Vacuum and Mop with Self Cleaning Station combines mapped vacuuming and dual spinning mops with an all-in-one maintenance dock. This standard Omni model has a published 12,000 Pa maximum suction rating and differs from the Pro model. The grouped specifications cover cleaning, navigation, station capacities, power and installation space. Automatic station functions reduce routine handling, while the owner still maintains water tanks, brushes, filters and consumables. Choose cleaning settings around the actual floor finish and carpet layout.
| Specification | Details |
|---|---|
| Cleaning System | |
| Maximum suction | Up to 12,000 Pa; five suction levels. |
| Mopping | Dual spinning mops; automatic mop removal; published mop lift up to 12mm. |
| Brush and filter | Tangle-management main brush; H11 filter. |
| Model distinction | Standard Omni; no Pro adaptive extending mop arm. |
| Navigation and Control | |
| Navigation | dToF LiDAR mapping; four drop sensors. |
| App controls | Room and zone routines, schedules and cleaning preferences; recharge/resume. |
| Threshold crossing | Up to 20mm under suitable conditions; depends on the obstacle and approach. |
| Wireless and platform | 2.4GHz WiFi; Bluetooth 4.2 for setup; supported Matter integration requires a compatible platform controller. |
| Containers and Station | |
| Robot dustbin | 280ml. |
| Station containers | 3-litre dust bag; 5-litre clean-water tank; 4-litre dirty-water tank. |
| Station functions | Automatic dust emptying and mop washing; 50°C warm-air mop drying. |
| Power and Battery | |
| Battery | 5,200mAh rechargeable battery. |
| Rated power | Robot 75W; station 600W; charging output 20V / 1A. |
| Regional mains | Manufacturer publishes different regional AC versions. Match the supplied version and plug to the destination; do not assume a universal-input station. |
| Physical | |
| Robot dimensions | 350mm diameter × 100.3mm high. |
| Station dimensions | 350 × 475 × 480mm, as published. |
| Package and Warranty | |
| Included | Robot with fitted filter and side brush; Omni station with dust bag; mop attachments; detachable station base; power cable and guide. |
| Warranty | 18 months; battery 6 months. |

















