TP-Link POE370S Omada 10G PoE++ Injector 60W
Add 60W PoE++ Power to a 10G Ethernet Connection The TP-Link POE370S adds standards-based power to an Ethernet connection without replacing your existing switch. Its...
Add 60W PoE++ Power to a 10G Ethernet Connection
The TP-Link POE370S adds standards-based power to an Ethernet connection without replacing your existing switch. Its two multi-gigabit ports support data rates up to 10 Gbps, while the PoE output supplies up to 60W to a compatible access point, camera or other powered device.
Highlights
Power and data together
- IEEE 802.3af/at/bt Type 3 support with up to 60W output.
- One data input and one data-plus-power output.
Multi-gigabit networking
- Supports 10/100 Mbps, 1G, 2.5G, 5G and 10G Ethernet.
- Automatic power negotiation with compatible powered devices.
Flexible placement
- Integrated power supply and durable metal casing.
- Desktop or wall mounting; power cord included.
Key Features
Keep a high-speed data path
Connect a non-PoE network port to the data input, then run the PoE output to a compatible powered device. The injector supports up to 10 Gbps when the connected equipment and cabling support that rate.
Match the PoE requirement
IEEE 802.3af/at/bt negotiation supplies power according to the connected device. Check its required standard and power budget; passive PoE and non-standard PoE devices are incompatible.
Choose cabling for the speed
At 10G, the manufacturer specifies up to 50M with Cat 6 or up to 90M with shielded Cat 6a. Lower rates support the documented cable categories over up to 100M.
Install without software configuration
The integrated power supply and status LEDs simplify deployment. Connect the supplied power cord and suitable Ethernet cables; no controller adoption or software setup is required.
Summary
POE370S is a practical way to power one compatible high-demand Ethernet device while retaining a multi-gigabit link. Match the device, PoE standard and cable specification before installation.
TP-Link POE370S Omada 10G PoE++ Injector 60W
The TP-Link POE370S is a standards-based PoE++ injector that combines Ethernet data and power for one compatible powered device. Its data input and PoE output support link speeds from 10 Mbps to 10 Gbps. IEEE 802.3af/at/bt Type 3 negotiation provides up to 60W output, while an integrated power supply and metal enclosure suit desktop or wall installation. Cable category and length must match the required Ethernet speed.
| Specification | Details |
|---|---|
| Interfaces and Power | |
| Ports | 2 × RJ45: data input and data + PoE output |
| Supported data rates | 10/100 Mbps; 1/2.5/5/10 Gbps |
| PoE standards | IEEE 802.3af, 802.3at, 802.3bt Type 3 |
| Maximum PoE output | 60W |
| Power negotiation | Automatic detection and power negotiation for compliant devices |
| Power supply | Integrated AC power supply |
| Compatibility exclusion | Not compatible with passive or other non-standard PoE devices |
| Ethernet standards | IEEE 802.3i, 802.3u, 802.3ab, 802.3bz, 802.3an |
| Cable Requirements | |
| 10/100 Mbps | Cat 5 UTP or above; up to 100M |
| 1/2.5/5 Gbps | Cat 5e UTP or above; up to 100M |
| 10 Gbps, Cat 6 | Cat 6 UTP or above; up to 50M |
| 10 Gbps, shielded Cat 6a | Cat 6a STP or above; up to 90M |
| Physical and Package | |
| Dimensions (W × D × H) | 154.7 × 70 × 42 mm |
| Enclosure | Metal |
| Mounting | Desktop or wall |
| LEDs | PWR, PoE |
| Package contents | POE370S, power cord, installation guide |
| Certifications | CE, FCC |
| Environment and Warranty | |
| Operating temperature | −5 °C to 45 °C |
| Storage temperature | −40 °C to 70 °C |
| Operating humidity | 10–90% RH, non-condensing |
| Storage humidity | 5–90% RH, non-condensing |
| Warranty | 5 years, as listed by the local supplier |