Insta360 Motorcycle Magic Arm
A More Considered View of the Ride Create a motorcycle-mounted camera position with a dedicated bar-end fitting rather than a generic clamp. Insta360 Motorcycle Magic Arm combines adjustable joints with a base designed for specified hollow or threaded handlebars. Supplied inserts, adapters and fitting tools help you match the mounting arrangement to the motorcycle, while the removable arm allows the correctly fitted base to remain in place between sessions. Highlights Dedicated bar-end mount for specified hollow and threaded handlebars. Adjustable camera angle with 360° rotation. Expansion inserts and threaded adapters supplied. Removable arm with a base that can remain as an end plug. Designed for paved roads or tracks within the stated mounting limits. Key Features Match the Handlebar Before Fitting The system supports hollow handlebars with removable end plugs and an internal diameter of 13–19 mm, or specified threaded handlebar openings. Check both the thread diameter and pitch before installation. A motorcycle’s general style or outside bar diameter does not establish compatibility, and a fitting that resists tightening should not be forced. Use the Supplied Fitting Components Choose the correct expansion insert or screw adapter for the handlebar arrangement, then follow the illustrated fitting sequence. The kit provides separate inserts for the supported hollow-bar sizes and adapters for the stated threaded configurations. Use the appropriate tools to secure the base and arm, then check the assembly before attaching the camera. Set a Deliberate Camera Angle The adjustable arm allows 360° rotation to position the camera for the intended view. Set the angle while stationary and keep the arm and camera inside the motorcycle’s frame. Check clearance around the steering, mirrors and other controls before riding, and keep attention on operating the motorcycle rather than adjusting the camera in motion. Mount Each Camera Through Its Supported Interface For a compatible 360° camera, the manufacturer instructs direct attachment to the arm rather than adding a 1/4-inch to two-prong adapter. The supplied camera adapter supports the appropriate non-360 camera mounting arrangement. Check the exact camera interface; the camera itself is not included. Remove the Arm Between Sessions The arm can be removed after use while the correctly fitted base remains on the handlebar as an end plug. This reduces the need to repeat the complete base installation for every recording session. Check the retained base and its fasteners regularly rather than assuming that a previous installation remains secure indefinitely. Keep the Setup Within Its Riding Limits Use the mount only on paved roads or tracks. Do not add selfie sticks, helmet mounts or other external extensions, and do not position the camera outside the motorcycle’s frame. Inspect the fitting whenever you stop, tighten a loose assembly before further use and stop using damaged components. No universal motorcycle fit, camera-retention guarantee or crash protection is implied. Summary Insta360 Motorcycle Magic Arm provides a dedicated camera-mounting approach for a compatible motorcycle bar end. Confirm the internal diameter or exact thread, use the supplied fitting components and keep the camera within the permitted position. Secure the angle before riding and check the mount throughout the session. Frequently Asked Questions Will It Fit Every Motorcycle Handlebar?ExpandCollapse No. It supports hollow handlebars with removable end plugs and an internal diameter of 13–19 mm, or the specified threaded openings. Check the actual bar-end design and, for threaded bars, both diameter and pitch before purchase. Which Threaded Openings Are Supported?ExpandCollapse The official notes specify 8 mm with 1.25 mm pitch, 10 mm with 1.25 mm or 1.5 mm pitch, and 12 mm with 1.25 mm or 1.5 mm pitch. Select the correct supplied screw or adapter and do not force a fitting that does not tighten correctly. Can I Add a Selfie Stick for a Wider View?ExpandCollapse No. The manufacturer prohibits selfie sticks, helmet mounts and other external extensions on this arm. Keep the arm and camera within the motorcycle’s frame and follow the supplied mounting instructions. How Do I Fit a 360° Camera?ExpandCollapse Attach a compatible 360° camera directly through its supported 1/4-inch mounting interface. The manufacturer says not to add an adapter such as a 1/4-inch to two-prong adapter for that setup. Other camera types require their appropriate supported mounting arrangement. Can I Use It Off Road or Leave the Base Fitted?ExpandCollapse Use is limited to paved roads or tracks, not off-road riding. The arm can be removed and the correctly fitted base can remain as an end plug. Inspect the mount whenever you stop and correct any looseness before continuing.
Pickup available at 3005, Ubi Avenue 3, #01-88
Usually ready in 2-4 Business Day (Excluding Public Holiday)
Insta360 Motorcycle Magic Arm
Description
A More Considered View of the Ride
Create a motorcycle-mounted camera position with a dedicated bar-end fitting rather than a generic clamp. Insta360 Motorcycle Magic Arm combines adjustable joints with a base designed for specified hollow or threaded handlebars. Supplied inserts, adapters and fitting tools help you match the mounting arrangement to the motorcycle, while the removable arm allows the correctly fitted base to remain in place between sessions.
Highlights
- Dedicated bar-end mount for specified hollow and threaded handlebars.
- Adjustable camera angle with 360° rotation.
- Expansion inserts and threaded adapters supplied.
- Removable arm with a base that can remain as an end plug.
- Designed for paved roads or tracks within the stated mounting limits.
Key Features
Match the Handlebar Before Fitting
The system supports hollow handlebars with removable end plugs and an internal diameter of 13–19 mm, or specified threaded handlebar openings. Check both the thread diameter and pitch before installation. A motorcycle’s general style or outside bar diameter does not establish compatibility, and a fitting that resists tightening should not be forced.
Use the Supplied Fitting Components
Choose the correct expansion insert or screw adapter for the handlebar arrangement, then follow the illustrated fitting sequence. The kit provides separate inserts for the supported hollow-bar sizes and adapters for the stated threaded configurations. Use the appropriate tools to secure the base and arm, then check the assembly before attaching the camera.
Set a Deliberate Camera Angle
The adjustable arm allows 360° rotation to position the camera for the intended view. Set the angle while stationary and keep the arm and camera inside the motorcycle’s frame. Check clearance around the steering, mirrors and other controls before riding, and keep attention on operating the motorcycle rather than adjusting the camera in motion.
Mount Each Camera Through Its Supported Interface
For a compatible 360° camera, the manufacturer instructs direct attachment to the arm rather than adding a 1/4-inch to two-prong adapter. The supplied camera adapter supports the appropriate non-360 camera mounting arrangement. Check the exact camera interface; the camera itself is not included.
Remove the Arm Between Sessions
The arm can be removed after use while the correctly fitted base remains on the handlebar as an end plug. This reduces the need to repeat the complete base installation for every recording session. Check the retained base and its fasteners regularly rather than assuming that a previous installation remains secure indefinitely.
Keep the Setup Within Its Riding Limits
Use the mount only on paved roads or tracks. Do not add selfie sticks, helmet mounts or other external extensions, and do not position the camera outside the motorcycle’s frame. Inspect the fitting whenever you stop, tighten a loose assembly before further use and stop using damaged components. No universal motorcycle fit, camera-retention guarantee or crash protection is implied.
Summary
Insta360 Motorcycle Magic Arm provides a dedicated camera-mounting approach for a compatible motorcycle bar end. Confirm the internal diameter or exact thread, use the supplied fitting components and keep the camera within the permitted position. Secure the angle before riding and check the mount throughout the session.
Frequently Asked Questions
Will It Fit Every Motorcycle Handlebar?
No. It supports hollow handlebars with removable end plugs and an internal diameter of 13–19 mm, or the specified threaded openings. Check the actual bar-end design and, for threaded bars, both diameter and pitch before purchase.
Which Threaded Openings Are Supported?
The official notes specify 8 mm with 1.25 mm pitch, 10 mm with 1.25 mm or 1.5 mm pitch, and 12 mm with 1.25 mm or 1.5 mm pitch. Select the correct supplied screw or adapter and do not force a fitting that does not tighten correctly.
Can I Add a Selfie Stick for a Wider View?
No. The manufacturer prohibits selfie sticks, helmet mounts and other external extensions on this arm. Keep the arm and camera within the motorcycle’s frame and follow the supplied mounting instructions.
How Do I Fit a 360° Camera?
Attach a compatible 360° camera directly through its supported 1/4-inch mounting interface. The manufacturer says not to add an adapter such as a 1/4-inch to two-prong adapter for that setup. Other camera types require their appropriate supported mounting arrangement.
Can I Use It Off Road or Leave the Base Fitted?
Use is limited to paved roads or tracks, not off-road riding. The arm can be removed and the correctly fitted base can remain as an end plug. Inspect the mount whenever you stop and correct any looseness before continuing.
Specs
Insta360 Motorcycle Magic Arm
Insta360 Motorcycle Magic Arm is an adjustable bar-end camera mount for specifically sized hollow or threaded motorcycle handlebars. The included fitting components cover the stated diameter and thread-pitch combinations rather than every motorcycle. Check the bar-end construction before choosing a setup, then follow the installation and camera-interface instructions. Keep the camera inside the motorcycle’s frame, avoid additional external extensions and inspect the mount regularly during its intended paved-road or track use.
| Specification | Details |
|---|---|
| Handlebar Fit | |
| Hollow Handlebars | Removable end plug with internal diameter 13–19 mm |
| Expansion Inserts | 13–15 mm, 15–17 mm and 17–19 mm |
| Supported Threaded Openings | 8 mm × 1.25 mm;10 mm × 1.25 mm or 1.5 mm;12 mm × 1.25 mm or 1.5 mm |
| Fit Check | Verify actual bar-end construction, internal diameter or exact thread; do not force an incorrect adapter |
| Camera Position and Interface | |
| Adjustment | 360° rotation with adjustable arm joints |
| 360° Camera Fitting | Direct attachment through the supported 1/4-inch interface; do not add a 1/4-inch to two-prong adapter |
| Other Camera Fitting | Supplied 1/4-inch to 3-prong adapter for the supported camera arrangement |
| Removable Design | Arm can be removed while the correctly fitted base remains as an end plug |
| Physical Design | |
| Published Dimensions | 310 × 99 × 32.5 mm |
| Published Weight | Approximately 369.2 g |
| Materials | Aluminium alloy, stainless steel and plastic |
| Included Equipment | |
| Main Components | 1 Magic Arm Mount, 1 mount base and 1 extension rod |
| Fasteners and Inserts | 1 each 6 mm and 8 mm screw;1 each 13–15 mm, 15–17 mm and 17–19 mm expansion insert |
| Thread Adapters | 1 each 8–10 mm adapter with 1.25 mm pitch and 1.5 mm pitch;1 each 8–12 mm adapter with 1.25 mm pitch and 1.5 mm pitch |
| Camera Fitting and Tools | 1 supplied camera adapter, 1 thumb screw, 1 large hex key, 1 small hex key and 1 flat key |
| Sold Separately | Camera and motorcycle |
| Use Limits | |
| Surface | Paved roads or tracks only; not for off-road riding |
| Position | Keep arm and camera inside the motorcycle frame |
| Additional Extensions | Do not add selfie sticks, helmet mounts or other external extensions |
| Inspection | Check whenever stopping; tighten looseness and stop using damaged components |