Insta360 Luna Ultra Flip Screen Hood

A More Considered View in Bright Light Compose a low-angle scene without letting harsh light dominate the screen. Insta360 Luna Ultra Flip Screen Hood opens around the display to shade the view and folds flat when you finish. Its magnetic hood attaches to a fitted base, creating a compact everyday accessory with a classic waist-level framing feel. The alignment and cleaning tools support a careful first installation. This version is specific to Luna Ultra, with the camera supplied separately. Highlights Model-specific design for Insta360 Luna Ultra. Folding sides shade the screen in bright conditions. Magnetic hood with an adhesive fitted base. Folds down to help protect the screen during storage. Alignment tool, application kit and pry tool included. Key Features Frame from a Different Height An open hood gives the display a defined viewing area for waist-level and other creative low-angle compositions. Use the camera’s screen preview to check the scene before recording. The hood changes how you view the display; it does not change the lens, recorded field of view or camera imaging performance. Reduce Distracting Light on the Display The folding panels help shade the screen when working outdoors in bright light. Open the hood when you need the view, then fold it down when packing away. Keep its surfaces clean and position the camera for a comfortable viewing angle rather than expecting a shade to remove every reflection. Align the Base Before the First Use Clean and dry the screen with the supplied consumables, then position the alignment tool. Remove the base’s release paper, seat the assembly and press gently as instructed. Allow the fitted hood to sit for 8–12 hours before use so the attachment can settle. The magnetic hood and adhesive base have distinct roles. Remove the Hood Without Disturbing the Base For ordinary removal, lift off the hood while leaving its magnetic base attached. When closing it, fold the side sections first and then the centre panel. If the base itself needs removing, follow the supplied pry-tool procedure. Do not reuse a base that becomes bent or damaged during removal. Summary Insta360 Luna Ultra Flip Screen Hood brings a compact shaded viewing area to everyday framing and folds away between scenes. A precise, clean first installation matters. Leave the base fitted for routine hood removal, respect the settling time and use the prescribed opening, folding and removal sequence. Frequently Asked Questions Does This Fit Luna Pro or Ace Pro 2?ExpandCollapse This current manufacturer version is for Luna Ultra. It is not the separate Ace Pro screen hood, and Luna Pro compatibility is not listed for this exact accessory. Is the Whole Accessory Held on Only by Magnets?ExpandCollapse The hood connects magnetically to a fitted base. The base is applied to the screen using its adhesive and the supplied alignment procedure. Do not confuse removing the hood with removing the base. How Long Should I Wait After Fitting It?ExpandCollapse The manufacturer instructs allowing the fitted hood to sit for 8–12 hours before use. Clean, dry preparation and careful alignment help establish the intended attachment. What Is Supplied?ExpandCollapse One Flip Screen Hood, one alignment tool, one pry tool and one application kit. The kit contains two screen cloths, two dust-removal stickers and two screen-cleaning wipes. The camera is separate. Can I Remove and Reuse the Base?ExpandCollapse For normal use, remove the magnetic hood while leaving the base fitted. If you remove the base itself, use the prescribed tool procedure. Do not reuse a base that is bent or damaged. Read more