Insta360 GO 3/GO 3S Screen Protector
Keep the View Clear Before You Press Record The Action Pod is where you check framing, review a clip and change the next shot. Give its touchscreen an extra protective layer with this model-specific tempered-glass kit for Insta360 GO 3 and GO 3S. The clear surface preserves the view, while rounded edges keep everyday swipes comfortable. Two protectors and the supplied cleaning and fitting tools help you prepare a neat installation and keep a spare for later. Highlights Designed for the GO 3 and GO 3S Action Pod touchscreen. Tempered glass helps protect against everyday bumps and scratches. 90% light transmission supports a clear display. 2.5D rounded edges for smooth edge-to-edge swipes. Two protectors, a film removal stick and application supplies included. Key Features Protect the Screen You Use to Frame the Shot A layer of tempered glass sits over the Action Pod display, helping shield the surface from everyday contact and scratches. It is shaped for the GO 3 and GO 3S touchscreen rather than the small Standalone Camera lens. Fit it before a trip or an active day so the display you use for framing has an additional protective surface. Keep the Display Easy to Read The transparent glass is specified with 90% light transmission. It is designed to maintain a clear view of the display without reducing touchscreen sensitivity. You can continue checking composition, navigating settings and reviewing footage through the fitted protector. Keep the outer surface clean when using the screen in changing light. Enjoy a Smoother Edge Finish Rounded 2.5D edges follow the Action Pod screen for a smooth feel when swiping towards the sides. A precise installation matters: align the protector with the touchscreen before allowing the adhesive to settle. The correct shape and position help the protective layer sit neatly on the screen. Prepare a Clean Installation Use the cleaning wipe, screen cloth and dust-removal sticker to clear the surface before fitting. Remove the backing film, position the protector carefully, then work any air bubbles from the centre towards the edges as instructed. Remove the remaining top film after application. A clean preparation area helps avoid trapped particles. Keep a Spare for the Next Replacement The kit includes two screen protectors, one film removal stick and an application kit with two cloths, two dust-removal stickers and two cleaning wipes. Use the removal tool for a careful adjustment during fitting. Once a protector has been used and removed, replace it rather than reinstalling it with dust on the adhesive. Summary Insta360 GO 3/GO 3S Screen Protector adds a clear, neatly rounded layer to the Action Pod touchscreen. The two-protector kit combines tempered glass with the cleaning and application tools needed for a careful fit. Choose it for everyday screen care while keeping the display and touch controls straightforward to use. Frequently Asked Questions Does This Protect the Camera Lens or the Action Pod Screen?ExpandCollapse It protects the GO 3 or GO 3S Action Pod touchscreen. It is not a Lens Guard for the Standalone Camera and is not the GO Ultra screen protector. How Many Protectors Are Included?ExpandCollapse Two screen protectors are included, together with one film removal stick and one application kit. The kit contains two screen cloths, two dust-removal stickers and two screen-cleaning wipes. Will It Affect the Touchscreen?ExpandCollapse The manufacturer specifies 90% light transmission and a design that preserves touchscreen sensitivity. Clean the screen and align the protector carefully for a clear, properly seated installation. Can I Remove and Reuse the Same Protector?ExpandCollapse Do not reinstall a used protector. Dust on the adhesive can cause bubbles and reduce its hold. During initial fitting, follow the film-removal-stick instructions if a small alignment adjustment is required. Is It a Waterproof Cover for the Action Pod?ExpandCollapse It is an adhesive screen protector. It does not change the Action Pod’s water-resistance limits or replace the camera’s water-use instructions.
Pickup available at 3005, Ubi Avenue 3, #01-88
Usually ready in 2-4 Business Day (Excluding Public Holiday)
Insta360 GO 3/GO 3S Screen Protector
Description
Keep the View Clear Before You Press Record
The Action Pod is where you check framing, review a clip and change the next shot. Give its touchscreen an extra protective layer with this model-specific tempered-glass kit for Insta360 GO 3 and GO 3S. The clear surface preserves the view, while rounded edges keep everyday swipes comfortable. Two protectors and the supplied cleaning and fitting tools help you prepare a neat installation and keep a spare for later.
Highlights
- Designed for the GO 3 and GO 3S Action Pod touchscreen.
- Tempered glass helps protect against everyday bumps and scratches.
- 90% light transmission supports a clear display.
- 2.5D rounded edges for smooth edge-to-edge swipes.
- Two protectors, a film removal stick and application supplies included.
Key Features
Protect the Screen You Use to Frame the Shot
A layer of tempered glass sits over the Action Pod display, helping shield the surface from everyday contact and scratches. It is shaped for the GO 3 and GO 3S touchscreen rather than the small Standalone Camera lens. Fit it before a trip or an active day so the display you use for framing has an additional protective surface.
Keep the Display Easy to Read
The transparent glass is specified with 90% light transmission. It is designed to maintain a clear view of the display without reducing touchscreen sensitivity. You can continue checking composition, navigating settings and reviewing footage through the fitted protector. Keep the outer surface clean when using the screen in changing light.
Enjoy a Smoother Edge Finish
Rounded 2.5D edges follow the Action Pod screen for a smooth feel when swiping towards the sides. A precise installation matters: align the protector with the touchscreen before allowing the adhesive to settle. The correct shape and position help the protective layer sit neatly on the screen.
Prepare a Clean Installation
Use the cleaning wipe, screen cloth and dust-removal sticker to clear the surface before fitting. Remove the backing film, position the protector carefully, then work any air bubbles from the centre towards the edges as instructed. Remove the remaining top film after application. A clean preparation area helps avoid trapped particles.
Keep a Spare for the Next Replacement
The kit includes two screen protectors, one film removal stick and an application kit with two cloths, two dust-removal stickers and two cleaning wipes. Use the removal tool for a careful adjustment during fitting. Once a protector has been used and removed, replace it rather than reinstalling it with dust on the adhesive.
Summary
Insta360 GO 3/GO 3S Screen Protector adds a clear, neatly rounded layer to the Action Pod touchscreen. The two-protector kit combines tempered glass with the cleaning and application tools needed for a careful fit. Choose it for everyday screen care while keeping the display and touch controls straightforward to use.
Frequently Asked Questions
Does This Protect the Camera Lens or the Action Pod Screen?
It protects the GO 3 or GO 3S Action Pod touchscreen. It is not a Lens Guard for the Standalone Camera and is not the GO Ultra screen protector.
How Many Protectors Are Included?
Two screen protectors are included, together with one film removal stick and one application kit. The kit contains two screen cloths, two dust-removal stickers and two screen-cleaning wipes.
Will It Affect the Touchscreen?
The manufacturer specifies 90% light transmission and a design that preserves touchscreen sensitivity. Clean the screen and align the protector carefully for a clear, properly seated installation.
Can I Remove and Reuse the Same Protector?
Do not reinstall a used protector. Dust on the adhesive can cause bubbles and reduce its hold. During initial fitting, follow the film-removal-stick instructions if a small alignment adjustment is required.
Is It a Waterproof Cover for the Action Pod?
It is an adhesive screen protector. It does not change the Action Pod’s water-resistance limits or replace the camera’s water-use instructions.
Specs
Insta360 GO 3/GO 3S Screen Protector
This tempered-glass kit is made for the touchscreen on an Insta360 GO 3 or GO 3S Action Pod. It combines a clear protective surface with rounded edges and the tools for cleaning, dust removal and careful application. The included spare is a separate protector for later use. This accessory protects the screen surface; it does not cover the Standalone Camera lens or change the Action Pod’s water-resistance limits.
| Specification | Details |
|---|---|
| Compatibility and Display | |
| Screen Fit | Insta360 GO 3 and GO 3S Action Pod touchscreen |
| Material | Tempered glass |
| Light Transmission | 90% |
| Edge Design | 2.5D rounded edges |
| Touch Operation | Designed to preserve touchscreen sensitivity |
| Included Items | |
| Screen Protectors | 2 |
| Film Removal Stick | 1 |
| Application Kit | 1 kit containing 2 screen cloths, 2 dust-removal stickers and 2 screen-cleaning wipes |
| Installation and Care | |
| Preparation | Clean and dry the screen; remove dust before application |
| Fitting | Align carefully; move bubbles from the centre outwards and remove the top film |
| Reuse | Do not reinstall a used protector |
| Water Resistance | Does not change the Action Pod’s water-use limits |