Insta360 Electric Suction Cup Mount

A More Considered Way To Capture The Drive The Insta360 Electric Suction Cup Mount combines an electronic pump with a pressure sensor that monitors the seal throughout use. Position the camera on a suitable smooth surface, adjust the double ball head and check the suction level on the built-in screen. The result is a flexible mounting accessory for planned vehicle-camera shots, with practical controls and a rechargeable battery that supports longer journeys. Highlights Electronic pump with automatic pressure monitoring and suction refresh Double ball head for flexible camera positioning Up to 120 hours of runtime under the manufacturer’s stated test conditions 115mm suction cup with a screen showing battery and suction level Includes camera adapters, a NATO rail mount and a protective cap Key Features Automatic Suction Monitoring Press the mount firmly against a clean, smooth surface, then hold the control button to start the pump. The built-in sensor monitors pressure and restarts suction when it falls below the set threshold. A screen displays the suction level, while the indicator turns solid green when the attachment process is complete. Check the connection before filming rather than relying on the pump alone. Set The Camera Angle Before The Journey The double ball head allows flexible positioning around the mounted point, with 360° adjustment described by Insta360. Supplied 1/4-inch and three-prong ball-head adapters support compatible camera arrangements. Adjust and tighten the assembly while the vehicle is parked, keeping the camera directly connected in the approved configuration; a selfie stick or extension must not be added to this standalone mount. Rechargeable Power For Longer Sessions The integrated 1000mAh lithium-ion battery is charged through USB-C at DC 5V/1A. Insta360’s up-to-120-hour figure assumes suction refreshes once per hour, so surface smoothness and vibration affect actual runtime. Check the battery while parked, remove and recharge the mount if it falls below 10%, and keep the charging-port cover closed when the cable is disconnected. A Defined Surface And Setup Matter The 115mm cup is intended for smooth, clean surfaces, with the mount fully pressed into place before suction starts. Insta360 reports laboratory suction-force and impact-test results, but those are not a camera-payload rating or a guarantee for every road condition. Use the safety-cord attachment point with an appropriate cord, supplied separately, and inspect the mounting arrangement during the journey. Useful Interfaces Without A Complicated Kit The supplied NATO rail mount and clamp components make the accessory part of a wider compatible mounting system. Insta360 also lists compatibility with its separate Dual/Triple Suction Cup Car Mount, which has its own approved setup. This standalone package includes the camera-mounting adapters and protective cap; the camera, safety cord, USB-C cable, charger and multi-cup system are sold separately. Summary The Electric Suction Cup Mount brings active suction monitoring, a readable status screen and adaptable camera positioning into one accessory. Use it with a suitable surface, a charged battery and the approved direct-camera arrangement to prepare deliberate vehicle-camera shots. Frequently Asked Questions How Does The Automatic Suction Work?ExpandCollapse The electronic pump removes air and a pressure sensor monitors the seal. If the pressure falls below its set threshold, the pump restarts automatically. Press the cup firmly against a clean, smooth surface and confirm the solid green indicator and secure attachment before use. Can I Attach A Selfie Stick To The Single Mount?ExpandCollapse No. The manufacturer explicitly prohibits adding a selfie stick or other unapproved accessory to this standalone Electric Suction Cup Mount. The separate Dual/Triple Suction Cup Car Mount is a different system with its own mounting instructions. Does The Battery Always Last Five Days?ExpandCollapse No. The up-to-120-hour result assumes suction is refreshed once each hour. Surface smoothness and vibration change the actual runtime. Check the battery while parked and remove and recharge the mount when it is below 10%. Can It Be Used In Rain Or At High Altitude?ExpandCollapse Do not use it in rain. Insta360 recommends use below 4000m altitude and says to stop using the mount if it repeatedly re-evacuates air above the recommended altitude. Keep the USB-C port cover sealed when it is not charging. What Is Included In This Package?ExpandCollapse It includes the Electric Suction Cup Mount, protective cap, clamp mount, 1/4-inch-to-ball-head adapter, three-prong-to-ball-head adapter, NATO rail mount, hex wrench and thumb screw. The camera, safety cord, USB-C cable and power adapter are sold separately. GO Ultra also requires its compatible Quick Release Mount, sold separately. Read more