Insta360 Crab Clamp

Add a Second Support Point to the Motorcycle Shot Give a compatible motorcycle filming setup additional support where it matters. Insta360 Crab Clamp links a suitable selfie stick to a smooth metal tube on the motorcycle, creating an auxiliary support point for third-person camera shots. Its adjustable double ball-head arrangement helps position the connection around the bike, while the aluminium-alloy structure and anti-slip contact surfaces provide a practical foundation for the approved mounting setup. Highlights Auxiliary support for specified motorcycle selfie-stick setups. Adjustable double ball-head arrangement for positioning. Compatible mounting diameters from 17 to 37 mm. Aluminium-alloy body with anti-slip contact surfaces. Works with separate supported selfie sticks and primary motorcycle mounts. Key Features Support the Selfie Stick at Another Point The clamp connects between the selfie stick and an appropriate smooth metal tube, such as a suitable handlebar or seat bar. This additional connection supports the filming arrangement rather than replacing the primary camera mount. Plan both attachment points so that the complete setup remains clear of moving parts and vehicle controls. Position the Connection to Suit the Motorcycle The double ball-head mechanism allows the two ends to be aligned with the selected attachment points. Loosen the adjustment before changing its position, then secure it again. Forcing a tightened joint can damage the accessory and leaves uncertainty about whether the chosen position is properly locked. Match the Tube Diameter and Surface The manufacturer specifies a mounting diameter range of 17–37 mm. Choose a suitable smooth metal surface within that range and check that the jaws sit correctly. Diameter alone does not establish a safe installation: the location, surface condition and complete filming arrangement must also suit the motorcycle. Build the Complete Approved Arrangement Use it with the Action Invisible Selfie Stick and either the Heavy Duty Clamp or Motorcycle U-Bolt Mount, all separate. The manufacturer also lists compatible 70 cm and 114 cm Invisible Selfie Sticks. This offer contains the Crab Clamp itself, so select the required stick, primary mount and camera connection before planning the shot. Prepare the Shot Before the Ride Set the camera viewpoint and tighten every fitting while stationary. Check the clamp again after making an adjustment and follow the limits of the stick and primary mount as well as this accessory. The manufacturer specifies motorcycle use and recommends a maximum speed of 80 km/h; local conditions and laws may require lower speeds. Keep the Accessory Purpose Clear The Crab Clamp weighs approximately 315 g, with an extended assembly measuring 247 × 45 × 68 mm. It is a dedicated stabilising component for the specified motorcycle arrangement, not an unrestricted vehicle rig or a complete camera kit. Use its original construction and follow the installation guidance for every component. Summary Insta360 Crab Clamp adds an auxiliary support point to a compatible motorcycle filming rig. Match its jaws to a suitable metal tube, align the double ball-head connection and use it with the required separate stick and primary mount. A carefully prepared setup helps keep the intended third-person composition organised while retaining clear equipment and riding limits. Frequently Asked Questions Is This a Complete Motorcycle Camera Mount?ExpandCollapse No. It is an auxiliary support component. The manufacturer specifies use with an Action Invisible Selfie Stick and either a Heavy Duty Clamp or Motorcycle U-Bolt Mount, sold separately. Compatible 70 cm and 114 cm Invisible Selfie Sticks are also listed. What Tube Sizes Does It Fit?ExpandCollapse The stated mounting diameter range is 17–37 mm. Use a suitable smooth metal tube, such as an appropriate handlebar or seat bar. Check the surface, position and complete installation rather than relying on diameter alone. How Should I Adjust the Ball Heads?ExpandCollapse Loosen the joint before changing its position, align the two ends with the chosen attachment points and tighten it again. Do not force the position while the joint is locked. Check all connections before recording. Are There Speed or Vehicle Limits?ExpandCollapse The manufacturer specifies motorcycle use and a recommended maximum speed of 80 km/h. Follow local laws and reduce speed when conditions require it. The separate selfie stick, camera and primary mount may impose further restrictions. What Is Included?ExpandCollapse The package contains one Crab Clamp. The camera, selfie stick, Heavy Duty Clamp or Motorcycle U-Bolt Mount and other illustrated equipment are separate. The clamp weighs approximately 315 g; its listed extended dimensions are 247 × 45 × 68 mm. Read more