D-Link DXS-3600-EM-4QXS 4-Port 40G QSFP+ Expansion Module

Add 40G Uplinks to Your DXS-3600 Network The DXS-3600-EM-4QXS adds four QSFP+ slots for high-bandwidth uplinks and supported stacking connections. It helps a compatible aggregation switch connect to faster upstream equipment without replacing the host chassis. Designed for DXS-3600-16S and DXS-3600-32S, this is a host-specific expansion module. It is installed in the supported expansion slot and works through the switch's hardware and software; it is not a standalone switch or a universal expansion card. Highlights Purpose-Built Connectivity 4 × 40 Gbps QSFP+ slots Designed for DXS-3600-16S and DXS-3600-32S. A Planned Installation Uses the supported DXS-3600 expansion slot. Confirm the host hardware revision and firmware before installation. Complete the Connection Requires compatible QSFP+ transceivers with matched fibre, or supported QSFP+ direct attach cables. Host switch and connection media are separate. Key Features Expand the Existing Chassis Use the available module slot to add the required connection type while retaining the compatible host switch. The module draws power and management from the host, keeping the added ports within the same installation rather than introducing a separate standalone device. Choose the Right Connection The host documentation supports up to 160 Gbps stacking with this module. Stacking bandwidth is a system-level figure and depends on the supported topology and connections. Match the Host Before Installation Supported hosts are DXS-3600-16S and DXS-3600-32S. Check the exact chassis, available expansion slot, hardware revision and firmware before ordering. Follow the host installation procedure and plan any required maintenance window; do not assume that a module can be installed during normal operation. Plan the Complete Link The connection also needs compatible QSFP+ transceivers with matched fibre, or supported QSFP+ direct attach cables. Check the equipment at both ends and the cable route, including available rack space and cable handling, so the selected module serves a complete compatible link. Summary The DXS-3600-EM-4QXS is a focused upgrade for DXS-3600-16S and DXS-3600-32S. Its 4 × 40 gbps qsfp+ slots suit the stated connection task while retaining the existing compatible chassis. Confirm the host and required connection media before selecting it for a new link or an expansion project. Frequently Asked Questions Which Switches Can Use This Module?ExpandCollapse It is designed for DXS-3600-16S and DXS-3600-32S. Confirm the exact host hardware revision, firmware and available expansion slot before ordering. Is This a Complete Standalone Switch?ExpandCollapse No. It is an expansion module that requires a compatible DXS-3600 host switch. It cannot operate on its own or be fitted to an unrelated switch family. What Else Is Required?ExpandCollapse You need a compatible host and compatible QSFP+ transceivers with matched fibre, or supported QSFP+ direct attach cables. The host switch and connection media are separate items. Can I Install It Without Interrupting the Network?ExpandCollapse Follow the installation instructions for the exact host and module. Plan the maintenance procedure with the person responsible for the network rather than assuming live installation is supported. Will Every Connected Device Run at the Maximum Port Speed?ExpandCollapse The host documentation supports up to 160 Gbps stacking with this module. Stacking bandwidth is a system-level figure and depends on the supported topology and connections. What Warranty Is Included?ExpandCollapse The warranty is 1 year. Read more