D-Link DWM-314-TP 4G LTE Multi-Connect PoE+ Modem

A Complete 4G Connection for a Small Powered Installation Link a small group of devices to 4G LTE while directly powering two compatible PoE endpoints, reducing the need for a separate local switch. The DWM-314-TP combines a cellular WAN, 2 × 10/100 Mbps LAN plus 2 × 10/100 Mbps PoE+ LAN and remote-management tools in a compact metal enclosure. Choose it for protected installations where the network must reach equipment beyond an ordinary fixed broadband connection. Highlights Cellular Connectivity 4G LTE Cat 4 cellular WAN 1 × Nano-SIM (4FF) External cellular antenna connectors Wired Installation 2 × 10/100 Mbps LAN plus 2 × 10/100 Mbps PoE+ LAN 60W shared PoE+ output budget with up to 30W per powered port NAT/router mode with static routing Practical Management OpenVPN client Web management and SMS event tools D-ECS remote management support with separate licensing Key Features A Mobile Uplink for the Right Application Link a small group of devices to 4G LTE while directly powering two compatible PoE endpoints, reducing the need for a separate local switch. A suitable mobile data plan and signal at the actual installation are essential. This is an Ethernet cellular modem/router, with no built-in Wi-Fi access point. Add a suitable access point separately when wireless clients are required. Wired Connections That Match the Equipment The modem provides 2 × 10/100 Mbps LAN plus 2 × 10/100 Mbps PoE+ LAN. Its 60W shared PoE budget supplies up to 30W per powered port at the PSE, for compatible IEEE 802.3af/at devices. PoE is an output: feed the modem from the supplied DC adapter or a correctly rated DC source, rather than expecting a PoE switch to power it. SIM Planning for a Dependable Connection Fit an active SIM of the correct size and configure the carrier APN where needed. A single SIM keeps this installation simple; it does not provide dual-carrier failover. Secure Remote Access with Clear Boundaries OpenVPN client help establish encrypted connections to a configured remote VPN endpoint. Web management, SMS event tools and connection monitoring support remote maintenance. Configure access controls and the receiving VPN service carefully; mobile carrier CGNAT can prevent unsolicited inbound access even when port forwarding is configured. Built for Protected Industrial Installations A corrosion-resistant metal enclosure and an operating range of −30 to 70°C suit protected industrial installations. Wall or DIN-rail installation; DIN-rail kit included. The power input is 48–57V DC via 2-pin terminal block. Keep the unit dry and ventilated; this is not an IP-rated outdoor enclosure. Manage One Device or a Wider Deployment Use the local Web UI for setup, firmware maintenance and status checks. D-ECS offers central remote management for supported deployments, but requires a separate device licence or an applicable included entitlement. Keep the carrier plan, licensing and installation requirements in the deployment budget. Summary DWM-314-TP is a focused choice for powered remote equipment that needs both cellular data and PoE+ delivery. Match the SIM, carrier coverage, regional radio specification and power arrangement to the site, then configure remote access and management to suit the application. Frequently Asked Questions Does this modem provide Wi-Fi?ExpandCollapse No. It provides cellular WAN and wired Ethernet connectivity. Connect a separate access point or suitable router if phones, laptops or other Wi-Fi clients need wireless access. Which SIM card and mobile network should I use?ExpandCollapse 1 × Nano-SIM (4FF). The listed radio bands follow the offered regional specification. Confirm the supplied regional hardware, carrier bands, APN and data-plan permission before deployment; a SIM and mobile subscription are not included. Does it support dual-SIM failover?ExpandCollapse Fit an active SIM of the correct size and configure the carrier APN where needed. A single SIM keeps this installation simple; it does not provide dual-carrier failover. Can this modem power a PoE camera or access point?ExpandCollapse Yes, compatible IEEE 802.3af/at devices can use its 2 PoE+ output ports, with up to 30W per port and a 60W shared budget at the PSE. The modem itself needs 48–57V DC via 2-pin terminal block. Check the endpoint power requirement and cable losses. Will remote access work through every mobile data plan?ExpandCollapse Not automatically. Carrier CGNAT, APN restrictions and firewall policies can affect inbound access. A correctly configured outbound VPN or an appropriate public/static-IP carrier service may be required. Advertised cellular rates are theoretical and depend on coverage, signal and network load. What is included and is cloud management free?ExpandCollapse The standard package includes 2 cellular antennas, an Ethernet cable and a power adapter. A 2-pin terminal block and DIN-rail kit are also included. D-ECS licensing is separate unless a specific included entitlement applies. SIM cards, mobile data plans and any additional access point are separate. Read more