D-Link DPS-800 Two-Slot Rack-Mount Power Supply Chassis
An Orderly Rack Home for Compatible Power Supplies The DPS-800 provides two mounting positions for compatible D-Link modular redundant power supplies in a 19-inch equipment rack. It keeps supported units together with an organised service position, rather than leaving standalone power supplies unsecured beside the switch. This offer is the chassis only. It contains no power-supply module, battery or shared backup-power source. Each installed module requires its own compatible switch connection and power arrangement. Confirm the exact PSU and host combination before selecting the chassis. Highlights Mounting Layout Two slots for compatible modular power supplies. Fits a standard 19-inch equipment rack. Open chassis for organised module access. Compatibility Manufacturer documentation lists DPS-200A and DPS-500A. Exact PSU, revision and switch connection must be verified. Power supplies and connection cables are separate. Service Planning Each PSU connects to its own power source. Chassis is not a UPS or power-conversion unit. 1-year warranty. Key Features Bring Two Modules Into One Position The two-slot frame gives supported redundant power modules a defined rack location. This helps keep the installation accessible for service and separates the mounting role from the power electronics. Choose the number and type of power supplies according to the supported switch design. Specify Compatibility Before Mounting The manufacturer’s DPS-series documentation lists the DPS-200A and DPS-500A for this chassis. A PSU fitting the frame does not by itself prove that it can power a particular switch. Confirm the exact module, hardware revision, connecting cable and host compatibility together. Keep the Power Sources Independent The chassis does not provide a common power supply or automatic battery backup. Each installed PSU uses its own power connection. Where resilience is required, plan the circuits and any suitable external UPS as part of the complete rack power design. Allow a Clean Cable Route Position the frame where AC leads and switch connection cables can be routed without strain. Leave the appropriate space for module removal and access to connectors. Clear labels make it easier to identify the supply supporting each switch during maintenance. Support an Orderly Service Procedure Compatible modular supplies can be serviced according to their own hardware instructions. The chassis simply retains them in the rack. Check the switch’s remaining power path before disconnecting a module, and verify status indicators after service. Buy the Mounting Frame Without Unneeded Electronics This offer supplies the empty two-slot chassis, allowing the installation to use its correct compatible power modules. It does not include PSU output wattage, battery runtime or PoE capacity. Those capabilities belong to the separately selected power system and host equipment. Summary The DPS-800 is a practical mounting chassis for a verified compatible redundant-power installation. Specify the PSU modules, switch cables, rack clearance and independent power paths together; the empty chassis does not itself provide power backup. Frequently Asked Questions Are Power Supplies Included?ExpandCollapse No. This offer is the empty two-slot chassis. Compatible modular PSUs and the required connecting cables are purchased separately. Is It a UPS?ExpandCollapse No. It contains no battery and does not provide stored-energy backup. A suitable external UPS is a separate component. Which Modules Are Listed as Compatible?ExpandCollapse D-Link’s DPS-series documentation lists DPS-200A and DPS-500A. Confirm the exact supplied module, revision and host compatibility before installation. Does the Chassis Have an Output Wattage?ExpandCollapse No independent PSU output rating applies to the empty frame. Output capacity depends on the separately installed compatible power modules. Does It Combine Both PSUs Into One Shared Feed?ExpandCollapse No. The documented installation connects each PSU to its own power source and compatible host. Plan the wiring and redundancy for the actual system. Will It Fit a Standard Equipment Rack?ExpandCollapse It is intended for a standard 19-inch rack. Check available vertical clearance, mounting hardware and cable access against the actual chassis dimensions before installation.
Pickup available at 3005, Ubi Avenue 3, #01-88
Usually ready in 2-4 Business Day (Excluding Public Holiday)
D-Link DPS-800 Two-Slot Rack-Mount Power Supply Chassis
Description
An Orderly Rack Home for Compatible Power Supplies
The DPS-800 provides two mounting positions for compatible D-Link modular redundant power supplies in a 19-inch equipment rack. It keeps supported units together with an organised service position, rather than leaving standalone power supplies unsecured beside the switch.
This offer is the chassis only. It contains no power-supply module, battery or shared backup-power source. Each installed module requires its own compatible switch connection and power arrangement. Confirm the exact PSU and host combination before selecting the chassis.
Highlights
Mounting Layout
- Two slots for compatible modular power supplies.
- Fits a standard 19-inch equipment rack.
- Open chassis for organised module access.
Compatibility
- Manufacturer documentation lists DPS-200A and DPS-500A.
- Exact PSU, revision and switch connection must be verified.
- Power supplies and connection cables are separate.
Service Planning
- Each PSU connects to its own power source.
- Chassis is not a UPS or power-conversion unit.
- 1-year warranty.
Key Features
Bring Two Modules Into One Position
The two-slot frame gives supported redundant power modules a defined rack location. This helps keep the installation accessible for service and separates the mounting role from the power electronics. Choose the number and type of power supplies according to the supported switch design.
Specify Compatibility Before Mounting
The manufacturer’s DPS-series documentation lists the DPS-200A and DPS-500A for this chassis. A PSU fitting the frame does not by itself prove that it can power a particular switch. Confirm the exact module, hardware revision, connecting cable and host compatibility together.
Keep the Power Sources Independent
The chassis does not provide a common power supply or automatic battery backup. Each installed PSU uses its own power connection. Where resilience is required, plan the circuits and any suitable external UPS as part of the complete rack power design.
Allow a Clean Cable Route
Position the frame where AC leads and switch connection cables can be routed without strain. Leave the appropriate space for module removal and access to connectors. Clear labels make it easier to identify the supply supporting each switch during maintenance.
Support an Orderly Service Procedure
Compatible modular supplies can be serviced according to their own hardware instructions. The chassis simply retains them in the rack. Check the switch’s remaining power path before disconnecting a module, and verify status indicators after service.
Buy the Mounting Frame Without Unneeded Electronics
This offer supplies the empty two-slot chassis, allowing the installation to use its correct compatible power modules. It does not include PSU output wattage, battery runtime or PoE capacity. Those capabilities belong to the separately selected power system and host equipment.
Summary
The DPS-800 is a practical mounting chassis for a verified compatible redundant-power installation. Specify the PSU modules, switch cables, rack clearance and independent power paths together; the empty chassis does not itself provide power backup.
Frequently Asked Questions
Are Power Supplies Included?
No. This offer is the empty two-slot chassis. Compatible modular PSUs and the required connecting cables are purchased separately.
Is It a UPS?
No. It contains no battery and does not provide stored-energy backup. A suitable external UPS is a separate component.
Which Modules Are Listed as Compatible?
D-Link’s DPS-series documentation lists DPS-200A and DPS-500A. Confirm the exact supplied module, revision and host compatibility before installation.
Does the Chassis Have an Output Wattage?
No independent PSU output rating applies to the empty frame. Output capacity depends on the separately installed compatible power modules.
Does It Combine Both PSUs Into One Shared Feed?
No. The documented installation connects each PSU to its own power source and compatible host. Plan the wiring and redundancy for the actual system.
Will It Fit a Standard Equipment Rack?
It is intended for a standard 19-inch rack. Check available vertical clearance, mounting hardware and cable access against the actual chassis dimensions before installation.
Specs
D-Link DPS-800 Two-Slot Rack-Mount Power Supply Chassis
The DPS-800 is an empty two-slot mounting chassis for compatible D-Link modular redundant power supplies. It fits a standard 19-inch equipment rack and provides a defined service position for supported modules. The manufacturer’s DPS-series documentation lists the DPS-200A and DPS-500A. Power modules and host connection cables are separate, and each installed PSU requires its own appropriate power arrangement. The frame has no battery, shared power conversion or independent output wattage. Check mounting clearance and the complete host-to-PSU compatibility before installation.
| Specification | Details |
|---|---|
| Function and Mounting | |
| Product Function | Rack-mount chassis only |
| Slots | 2 |
| Rack Width | Standard 19-inch equipment rack |
| Dimensions (W × D × H) | 482 × 180 × 55 mm |
| Clearance | Allow for the actual 55 mm chassis height, cabling and module access |
| Compatibility and Power | |
| Documented PSU Modules | DPS-200A and DPS-500A; exact revision and host connection must match |
| Power Conversion | None in empty chassis |
| Battery Backup | None |
| Power Connections | Each installed PSU connects separately to its power source |
| Module Service | Follow the compatible PSU and host installation instructions |
| Supply | |
| Included | Empty two-slot chassis |
| Required Separately | Compatible PSU modules, host connection cables and installation hardware as required |
| Warranty | 1 year |