D-Link DPE-F311GI 30W Gigabit PoE+ Injector
Power a Connected Device Where It Works Best The D-Link DPE-F311GI adds power to a Gigabit Ethernet connection, helping you position a compatible access point, IP camera or IP phone where coverage and visibility matter. One cable carries data and PoE+ power from the injector to the connected device, reducing the need for a nearby electrical socket. Designed for IEEE 802.3af and 802.3at devices, it supplies up to 30 W at the injector. Connect the data input to your network, the PoE output to the supported device and the supplied UK power cord to mains power. Check the receiving device’s power standard and required wattage before installation. Highlights Gigabit Networking One 10/100/1000BASE-T data input and one Gigabit PoE+ output. Carries data and power over a single Ethernet connection. Practical Deployment Up to 30 W injector output for compatible IEEE 802.3af/at devices. Up to 100 m Ethernet channel with suitable cabling and installation. Compact housing and plug-and-play operation without software configuration. Key Features A Targeted Upgrade for a Non-PoE Network Keep the existing network connection and add PoE+ power for one suitable endpoint. This is useful when a single device needs power and a full PoE switch is unnecessary for the installation. Position Cameras and Access Points More Freely The powered connection can reach a ceiling-mounted access point, entrance camera or IP phone without placing a mains socket beside the endpoint. The injector itself still needs an appropriate AC outlet. Match the Power Standard Before Connecting The DPE-F311GI is the IEEE 802.3af/at model in this offer. It is a different ordering code from the DPE-311GI passive injector. Confirm the connected device supports the required standard; the power reaching it is affected by cable losses and its negotiated class. Straightforward Network Installation Separate data input and powered output keep the connection path clear. Power and link indicators assist basic checks, while automatic Ethernet operation avoids an additional software setup process. Plan for the Installation Environment Use suitable Ethernet cable within the supported channel length and keep the injector in an appropriate indoor environment. For equipment outdoors, assess weather protection, grounding and surge protection separately. The injector does not make an outdoor installation weatherproof. Summary The D-Link DPE-F311GI is a compact way to add standards-based PoE+ power to one Gigabit network connection. Match the endpoint’s electrical requirements, cable route and installation environment to provide a practical power-and-data link for a compatible access point, camera or phone. Frequently Asked Questions Does this injector support standard PoE and PoE+?ExpandCollapse Yes. The exact DPE-F311GI datasheet identifies IEEE 802.3af and IEEE 802.3at compatibility, with up to 30 W output at the injector. Confirm the endpoint’s required power class and allow for cable losses. Is DPE-F311GI the same as DPE-311GI?ExpandCollapse No. They are different ordering codes. This listing is for DPE-F311GI, the IEEE 802.3af/at Gigabit PoE+ injector. Do not use passive DPE-311GI specifications to select this product. Will it increase my network speed?ExpandCollapse It carries a compatible 10/100/1000 Mbps Ethernet connection. It does not turn an existing slower network link into a faster one, and it does not provide 2.5 GbE or 10 GbE. How far can the powered Ethernet cable run?ExpandCollapse The stated maximum Ethernet channel is up to 100 m with suitable cabling and installation. The endpoint’s power requirement, cable quality and total channel length must be considered together. Does it require a separate power supply?ExpandCollapse The offer is an all-in-one mains-powered injector with a UK three-pin power cord. The injector needs a suitable AC outlet; the connected PoE device receives power through Ethernet. Can I use it with an outdoor camera?ExpandCollapse A compatible outdoor camera can receive its supported PoE connection from an injector installed in a suitable protected environment. Assess outdoor cabling, grounding, lightning and surge protection separately.
Pickup available at 3005, Ubi Avenue 3, #01-88
Usually ready in 2-4 Business Day (Excluding Public Holiday)
D-Link DPE-F311GI 30W Gigabit PoE+ Injector
Description
Power a Connected Device Where It Works Best
The D-Link DPE-F311GI adds power to a Gigabit Ethernet connection, helping you position a compatible access point, IP camera or IP phone where coverage and visibility matter. One cable carries data and PoE+ power from the injector to the connected device, reducing the need for a nearby electrical socket.
Designed for IEEE 802.3af and 802.3at devices, it supplies up to 30 W at the injector. Connect the data input to your network, the PoE output to the supported device and the supplied UK power cord to mains power. Check the receiving device’s power standard and required wattage before installation.
Highlights
Gigabit Networking
- One 10/100/1000BASE-T data input and one Gigabit PoE+ output.
- Carries data and power over a single Ethernet connection.
Practical Deployment
- Up to 30 W injector output for compatible IEEE 802.3af/at devices.
- Up to 100 m Ethernet channel with suitable cabling and installation.
- Compact housing and plug-and-play operation without software configuration.
Key Features
A Targeted Upgrade for a Non-PoE Network
Keep the existing network connection and add PoE+ power for one suitable endpoint. This is useful when a single device needs power and a full PoE switch is unnecessary for the installation.
Position Cameras and Access Points More Freely
The powered connection can reach a ceiling-mounted access point, entrance camera or IP phone without placing a mains socket beside the endpoint. The injector itself still needs an appropriate AC outlet.
Match the Power Standard Before Connecting
The DPE-F311GI is the IEEE 802.3af/at model in this offer. It is a different ordering code from the DPE-311GI passive injector. Confirm the connected device supports the required standard; the power reaching it is affected by cable losses and its negotiated class.
Straightforward Network Installation
Separate data input and powered output keep the connection path clear. Power and link indicators assist basic checks, while automatic Ethernet operation avoids an additional software setup process.
Plan for the Installation Environment
Use suitable Ethernet cable within the supported channel length and keep the injector in an appropriate indoor environment. For equipment outdoors, assess weather protection, grounding and surge protection separately. The injector does not make an outdoor installation weatherproof.
Summary
The D-Link DPE-F311GI is a compact way to add standards-based PoE+ power to one Gigabit network connection. Match the endpoint’s electrical requirements, cable route and installation environment to provide a practical power-and-data link for a compatible access point, camera or phone.
Frequently Asked Questions
Does this injector support standard PoE and PoE+?
Yes. The exact DPE-F311GI datasheet identifies IEEE 802.3af and IEEE 802.3at compatibility, with up to 30 W output at the injector. Confirm the endpoint’s required power class and allow for cable losses.
Is DPE-F311GI the same as DPE-311GI?
No. They are different ordering codes. This listing is for DPE-F311GI, the IEEE 802.3af/at Gigabit PoE+ injector. Do not use passive DPE-311GI specifications to select this product.
Will it increase my network speed?
It carries a compatible 10/100/1000 Mbps Ethernet connection. It does not turn an existing slower network link into a faster one, and it does not provide 2.5 GbE or 10 GbE.
How far can the powered Ethernet cable run?
The stated maximum Ethernet channel is up to 100 m with suitable cabling and installation. The endpoint’s power requirement, cable quality and total channel length must be considered together.
Does it require a separate power supply?
The offer is an all-in-one mains-powered injector with a UK three-pin power cord. The injector needs a suitable AC outlet; the connected PoE device receives power through Ethernet.
Can I use it with an outdoor camera?
A compatible outdoor camera can receive its supported PoE connection from an injector installed in a suitable protected environment. Assess outdoor cabling, grounding, lightning and surge protection separately.
Specs
D-Link DPE-F311GI 30W Gigabit PoE+ Injector
The DPE-F311GI combines Gigabit Ethernet with IEEE 802.3af and 802.3at power injection for one compatible network endpoint. It provides separate data input and powered output ports, up to 30 W at the injector, and a mains-powered design with a UK power cord. Match the endpoint’s power requirement, cable channel and environment before installation.
| Specification | Details |
|---|---|
| Network Connections | |
| Data Input | 1 × 10/100/1000BASE-T RJ-45 |
| Powered Output | 1 × 10/100/1000BASE-T RJ-45 with PoE+ |
| Maximum Ethernet Channel | Up to 100 m with suitable cabling and installation |
| Power Delivery | |
| PoE Standards | IEEE 802.3af and IEEE 802.3at |
| Injector Output | Up to 30 W; usable endpoint power depends on cable losses and power class |
| AC Input | 100–240 V AC |
| DC Output Rating | 55 V / 0.6 A |
| Maximum Consumption | 32.4 W |
| Physical and Environmental | |
| Dimensions | 97.5 × 53.6 × 35.3 mm (L × W × H) |
| Device Weight | 133 g |
| Operating Temperature | 0–40 °C |
| Storage Temperature | −20–80 °C |
| Operating Humidity | 10–90% RH non-condensing |
| Storage Humidity | 5–90% RH non-condensing |
| Installation | |
| Hardware Warranty | 1 year |
| Indicators | Power and link |
| Configuration | Plug and play; no software setup required |
| Power Cord | UK three-pin power cord supplied |
| Device Selection | IEEE 802.3af/at-compatible endpoint; confirm the required power class and cable losses |