D-Link DIS-200G-12PS 12-Port Gigabit Industrial PoE+ Switch
Industrial PoE Access With Practical Network Control The DIS-200G-12PS connects eight PoE+ endpoints, two independently powered Gigabit devices and two Gigabit fibre links in one industrial managed switch. Its fanless IP30 metal enclosure supports DIN-rail, wall and optional rack installations for equipment cabinets, factory networks and protected surveillance sites. VLANs, Ethernet ring protection, access controls and diagnostic tools help organise the network and investigate connection problems. Plan this offer around a 130 W PoE budget and a suitable external DC source. The manufacturer also documents a higher supply-dependent system ceiling; this does not make 240 W available with every power supply or installation. Highlights Twelve Logical Ports 8 × Gigabit PoE+ copper, 2 × Gigabit data-only copper and 2 × Gigabit SFP. 24 Gbps switching capacity and up to 17.85 Mpps forwarding. 8K MAC entries and 9,600-byte jumbo frames. Industrial Installation Fanless IP30 metal enclosure. −40°C to 65°C operation for this model. External 48–54 V DC terminal input or 54 V DC 4-pin DIN input. Power and Control Up to 30 W per PoE+ port; plan this offer around 130 W shared power. ERPS, VLANs, QoS, web UI, CLI and SNMP. 5-year warranty. Key Features A Port Layout That Is Easy to Plan Eight copper ports can carry both network data and PoE+ power. Two additional Gigabit copper ports connect separately powered equipment, and two SFP slots support compatible Gigabit fibre links. These are twelve logical ports, with no need to count the fibre connectors as substitutes for the two data-only copper ports. Choose the Power Source With the Load The power supply is purchased separately. Plan the local offer around 130 W shared PoE power, with up to 30 W per powered port. The manufacturer’s 240 W system maximum requires a sufficiently rated source and suitable operating conditions; a 180 W adapter cannot deliver a 240 W PoE load. Industrial Construction for Protected Sites A fanless IP30 metal enclosure suits appropriate industrial cabinets and can be mounted on a DIN rail or wall. Rack installation needs the correct optional mounting hardware. The −40°C to 65°C operating range applies to this model; it should not be confused with the wider upper-temperature rating of the PSW variant. Separate Services and Prioritise Traffic 802.1Q VLANs, Voice VLAN and Auto-Surveillance VLAN help organise different services. QoS, multicast snooping and bandwidth controls support deliberate traffic handling. Configure these features for the applications and upstream network rather than assuming a switch alone guarantees camera or voice performance. Plan Recovery Before a Fault ERPS and spanning-tree protocols support a configured resilient network. Dual DC terminal inputs permit an appropriate redundant-power design, while a relay provides an alarm contact. Use correct grounding, test failover and keep the cabinet accessible for service; redundancy depends on the complete installation. Tools for Remote Administration The browser interface, CLI and SNMP give administrators ways to manage the switch. Cable diagnostics, optical monitoring with supported modules, logs and port mirroring assist fault finding. Access restrictions and secure management settings should be established before the switch is deployed to a remote equipment cabinet. Summary The DIS-200G-12PS provides industrial Gigabit PoE+ access with two additional copper ports, two fibre slots and practical management. Specify the external power system, optics and mounting hardware together, and size the available PoE budget for the actual connected load. Frequently Asked Questions How Many Ports Does It Have?ExpandCollapse Twelve: eight Gigabit PoE+ copper ports, two Gigabit data-only copper ports and two Gigabit SFP slots. Is a Power Supply Included?ExpandCollapse No. Select a suitable external supply for the specified DC input and the intended switch and PoE load. Is the PoE Budget 130 W or 240 W?ExpandCollapse Plan this offer around 130 W. The manufacturer documents a supply-dependent system maximum of 240 W, but actual available power depends on the connected supply, installation and load. A 180 W adapter does not enable 240 W of PoE. Is This the Wide-Temperature PSW Model?ExpandCollapse No. This is DIS-200G-12PS, rated from −40°C to 65°C. The PSW model is a separate product. Can It Use Industrial Fibre Modules?ExpandCollapse Yes. Supported industrial Gigabit SFP modules can be selected for the required fibre type, wavelength, distance and temperature. Optical modules are purchased separately. Can It Be Mounted in a Rack?ExpandCollapse Yes, using compatible optional rack-mounting hardware. DIN-rail and wall mounting are also supported; confirm the mounting and power accessories for the installation.
Add-ons (1)
Pickup available at 3005, Ubi Avenue 3, #01-88
Usually ready in 2-4 Business Day (Excluding Public Holiday)
D-Link DIS-200G-12PS 12-Port Gigabit Industrial PoE+ Switch
Description
Industrial PoE Access With Practical Network Control
The DIS-200G-12PS connects eight PoE+ endpoints, two independently powered Gigabit devices and two Gigabit fibre links in one industrial managed switch. Its fanless IP30 metal enclosure supports DIN-rail, wall and optional rack installations for equipment cabinets, factory networks and protected surveillance sites.
VLANs, Ethernet ring protection, access controls and diagnostic tools help organise the network and investigate connection problems. Plan this offer around a 130 W PoE budget and a suitable external DC source. The manufacturer also documents a higher supply-dependent system ceiling; this does not make 240 W available with every power supply or installation.
Highlights
Twelve Logical Ports
- 8 × Gigabit PoE+ copper, 2 × Gigabit data-only copper and 2 × Gigabit SFP.
- 24 Gbps switching capacity and up to 17.85 Mpps forwarding.
- 8K MAC entries and 9,600-byte jumbo frames.
Industrial Installation
- Fanless IP30 metal enclosure.
- −40°C to 65°C operation for this model.
- External 48–54 V DC terminal input or 54 V DC 4-pin DIN input.
Power and Control
- Up to 30 W per PoE+ port; plan this offer around 130 W shared power.
- ERPS, VLANs, QoS, web UI, CLI and SNMP.
- 5-year warranty.
Key Features
A Port Layout That Is Easy to Plan
Eight copper ports can carry both network data and PoE+ power. Two additional Gigabit copper ports connect separately powered equipment, and two SFP slots support compatible Gigabit fibre links. These are twelve logical ports, with no need to count the fibre connectors as substitutes for the two data-only copper ports.
Choose the Power Source With the Load
The power supply is purchased separately. Plan the local offer around 130 W shared PoE power, with up to 30 W per powered port. The manufacturer’s 240 W system maximum requires a sufficiently rated source and suitable operating conditions; a 180 W adapter cannot deliver a 240 W PoE load.
Industrial Construction for Protected Sites
A fanless IP30 metal enclosure suits appropriate industrial cabinets and can be mounted on a DIN rail or wall. Rack installation needs the correct optional mounting hardware. The −40°C to 65°C operating range applies to this model; it should not be confused with the wider upper-temperature rating of the PSW variant.
Separate Services and Prioritise Traffic
802.1Q VLANs, Voice VLAN and Auto-Surveillance VLAN help organise different services. QoS, multicast snooping and bandwidth controls support deliberate traffic handling. Configure these features for the applications and upstream network rather than assuming a switch alone guarantees camera or voice performance.
Plan Recovery Before a Fault
ERPS and spanning-tree protocols support a configured resilient network. Dual DC terminal inputs permit an appropriate redundant-power design, while a relay provides an alarm contact. Use correct grounding, test failover and keep the cabinet accessible for service; redundancy depends on the complete installation.
Tools for Remote Administration
The browser interface, CLI and SNMP give administrators ways to manage the switch. Cable diagnostics, optical monitoring with supported modules, logs and port mirroring assist fault finding. Access restrictions and secure management settings should be established before the switch is deployed to a remote equipment cabinet.
Summary
The DIS-200G-12PS provides industrial Gigabit PoE+ access with two additional copper ports, two fibre slots and practical management. Specify the external power system, optics and mounting hardware together, and size the available PoE budget for the actual connected load.
Frequently Asked Questions
How Many Ports Does It Have?
Twelve: eight Gigabit PoE+ copper ports, two Gigabit data-only copper ports and two Gigabit SFP slots.
Is a Power Supply Included?
No. Select a suitable external supply for the specified DC input and the intended switch and PoE load.
Is the PoE Budget 130 W or 240 W?
Plan this offer around 130 W. The manufacturer documents a supply-dependent system maximum of 240 W, but actual available power depends on the connected supply, installation and load. A 180 W adapter does not enable 240 W of PoE.
Is This the Wide-Temperature PSW Model?
No. This is DIS-200G-12PS, rated from −40°C to 65°C. The PSW model is a separate product.
Can It Use Industrial Fibre Modules?
Yes. Supported industrial Gigabit SFP modules can be selected for the required fibre type, wavelength, distance and temperature. Optical modules are purchased separately.
Can It Be Mounted in a Rack?
Yes, using compatible optional rack-mounting hardware. DIN-rail and wall mounting are also supported; confirm the mounting and power accessories for the installation.
Specs
D-Link DIS-200G-12PS 12-Port Gigabit Industrial PoE+ Switch
The DIS-200G-12PS has eight Gigabit PoE+ copper ports, two additional Gigabit copper ports and two dedicated Gigabit SFP slots. Plan this offer around a 130 W shared PoE budget with an adequately rated external power supply. The manufacturer’s higher 240 W system ceiling remains dependent on the connected source and conditions. Its fanless IP30 enclosure supports protected industrial installations, with a −40°C to 65°C operating range. Optical modules, power supplies and optional rack hardware are selected separately.
| Specification | Details |
|---|---|
| Interfaces and Performance | |
| Copper Ports | 8 × 10/100/1000BASE-T PoE+; 2 × 10/100/1000BASE-T data-only |
| Fibre Slots | 2 × Gigabit SFP; modules sold separately |
| Switching and Forwarding | 24 Gbps; up to 17.85 Mpps |
| MAC Table and Jumbo Frames | 8K entries; up to 9,600 bytes |
| Power and Installation | |
| PoE Standard and Port Limit | IEEE 802.3af/at; up to 30 W per powered port |
| Planned Offer Budget | 130 W shared PoE |
| Manufacturer System Ceiling | Up to 240 W, dependent on a sufficiently rated supply and operating conditions |
| Power Inputs | 48–54 V DC terminal-block dual input; 54 V DC 4-pin DIN single input |
| Maximum and Standby Consumption | Up to 260 W with PoE; 10.8 W without PoE; 7.02 W standby |
| Alarm Relay | 1 A at 24 V |
| Supply and Rack Hardware | External supply and compatible rack kit sold separately |
| Management and Security | |
| VLANs | 128 static VLAN groups; up to 4,094 VLAN IDs; Voice and Auto-Surveillance VLAN |
| Resilience | ERPS, STP, RSTP, MSTP and link aggregation |
| QoS and Multicast | 4 queues per port; IGMP/MLD snooping |
| Security | Traffic segmentation, storm control, port security, RADIUS, SSH and SSL |
| Administration | Web UI, CLI, SNMP v1/v2c/v3, logs and D-Link Network Assistant |
| Diagnostics | Cable diagnostics, port mirroring and optical DDM with supported modules |
| Physical and Environmental | |
| Housing and Mounting | IP30 metal; fanless; DIN rail, wall or optional rack installation |
| Dimensions | 210 × 171.2 × 53 mm |
| Device Weight | 1.76 kg |
| Operating and Storage Temperature | Operating −40°C to 65°C; storage −40°C to 85°C |
| Humidity | Operating and storage 0–95% RH non-condensing |
| MTBF | 213,112 hours |
| Protection and Standards | 6 kV copper-port surge protection; CE, FCC and BSMI; UL60950-1 |
| Warranty | 5 years |
Add-ons
