D-Link DGS-3630-52TC Switch Image Upgrade Licence

Enable the Routing Features Your Network Needs Extend the software capabilities of a compatible DGS-3630-52TC without replacing the switch. Choose the upgrade path that matches its installed image and the features required by your network: Standard to Enhanced, Enhanced to MPLS, or Standard directly to MPLS. Enhanced Image adds documented enterprise Layer 3 routing and multicast functions. MPLS Image includes those capabilities and adds service-provider functions such as IS-IS and MPLS VPN. This is a model-specific software entitlement, with the switch and any configuration services supplied separately. Highlights Choose the Upgrade Standard to Enhanced for additional enterprise routing Enhanced to MPLS for a switch already running Enhanced Standard to MPLS for a direct upgrade from Standard Check the Installation For the exact DGS-3630-52TC host model Installed software image and supported firmware must match Physical stack members require matching image versions Digital Fulfilment One-time image-upgrade entitlement Manual email delivery after device and edition verification No switch, additional ports or installation included Key Features Match the Existing Switch and Image This licence family is specific to DGS-3630-52TC. Check the model, serial number, installed image and supported firmware before choosing an edition. A similar chassis, another DGS-3630 model or a switch already supplied with the target image does not establish that an additional upgrade is needed. Add Enterprise Layer 3 Functions Enhanced Image includes the Standard Image capabilities and adds documented routing functions such as OSPF, BGP and VRF-Lite, together with Layer 3 multicast. Choose Standard to Enhanced when those additional capabilities match the intended network design and the switch currently runs an eligible Standard Image. Extend a Supported Deployment to MPLS MPLS Image includes the Standard and Enhanced Image functions and adds documented service-provider capabilities such as IS-IS, LDP, VPWS, VPLS and BGP/MPLS VPN. Choose the starting-image path carefully. Enhanced to MPLS and Standard to MPLS are different entitlements, even though both lead to MPLS Image. Plan the Upgrade Around the Network An image licence enables supported software functions; it does not configure routing, increase physical port counts or add PoE capacity. Review the topology, addressing, policies and firmware requirements before deployment. Back up the configuration and schedule the activation and required restart during an appropriate maintenance window. Keep Stack Members Aligned D-Link requires physically stacked DGS-3630 switches to use the same image version. Check every intended stack member and the applicable per-device entitlement before ordering. Upgrading one unit should not be treated as an automatic licence for all other switches or as a substitute for stack compatibility checks. Receive a Verified Digital Entitlement After checking the exact switch, its current image and the selected upgrade, our Specialist obtains the correct entitlement and manually emails the licence or activation details. Delivery is not automatic or immediate. Keep the entitlement and activation record with the registered device. Follow the model-specific manufacturer procedure and confirm the resulting active image before relying on newly enabled functions. Summary Choose the DGS-3630-52TC image upgrade around the switch you already own and the network functions you need. Clear starting-image choices, exact model checks and manually supplied activation details help keep the purchase aligned with the deployment. Frequently Asked Questions Which Edition Should I Choose?ExpandCollapse Choose Standard to Enhanced for an eligible Standard Image switch that needs Enhanced features. Choose Enhanced to MPLS when it already runs Enhanced, or Standard to MPLS for a direct Standard-to-MPLS upgrade. Confirm the installed image before ordering. Can I Use This Licence on Another Switch Model?ExpandCollapse No. These offers are specified for DGS-3630-52TC. Other DGS-3630 models require their own matching entitlements. Check the exact device and serial number before a licence is generated or applied. Does My Switch Already Include These Features?ExpandCollapse It may do. DGS-3630 switches can be supplied with Standard, Enhanced or MPLS Image. Verify the currently active image and required functions first; buying an upgrade to an image already included may be unnecessary. Is This a Subscription or a Physical Switch?ExpandCollapse This is a one-time switch image-upgrade entitlement, rather than a term-based cloud subscription. It does not include a switch, additional physical interfaces, hardware warranty extension or installation service. Can I Upgrade Just One Switch in a Physical Stack?ExpandCollapse Check the full stack first. Physically stacked DGS-3630 switches need matching image versions, and the correct entitlement must be arranged for each target device. Activation also requires a planned restart, so schedule the work appropriately. How Is the Licence Delivered and Activated?ExpandCollapse After checking the exact switch, its current image and the selected upgrade, our Specialist obtains the correct entitlement and manually emails the licence or activation details. Delivery is not automatic or immediate. We confirm the required device details before fulfilment. Apply the entitlement using the supported manufacturer procedure, restart as required and verify the resulting active image. Read more