D-Link DAP-2682 Nuclias Connect AC2300 Wave 2 High-Density (HD) Access Point
Managed Dual-Band Wi-Fi for Busy Indoor Spaces The D-Link DAP-2682 brings simultaneous dual-band Wi-Fi 5 to offices, meeting areas and other indoor business spaces. Its AC2300 Wave 2 radio combines MU-MIMO, beamforming and band steering, while two Gigabit Ethernet ports provide wired connectivity at the access point. Mount it on a wall or ceiling and supply power through an 802.3at PoE+ network connection. Use its browser interface for an individual installation, or organise supported access points through Nuclias Connect with compatible firmware and an appropriate controller or software host. Highlights Dual-Band Wireless Up to 600 Mbps on 2.4 GHz and 1700 Mbps on 5 GHz MU-MIMO and beamforming for compatible clients Band steering and automatic channel selection Managed Business Access Standalone configuration or Nuclias Connect management Up to 16 SSIDs with VLAN configuration WPA2-Personal and WPA2-Enterprise authentication Practical Indoor Installation Two 10/100/1000 Mbps Ethernet ports 802.3at PoE+ input on the designated LAN port Wall and ceiling mounting plate and hardware Key Features Give Clients Two Wireless Bands Simultaneous 2.4 GHz and 5 GHz operation accommodates a mix of wireless devices. The published radio rates are up to 600 Mbps and 1700 Mbps respectively. AC2300 describes the combined radio class; it is not a 2300 Mbps connection for one device. Practical throughput depends on the client, signal conditions, interference, shared airtime and wired network. Make Better Use of Shared Airtime MU-MIMO helps the access point communicate with multiple compatible clients, while beamforming directs transmissions towards supported devices. Band steering can guide suitable clients towards the preferred band. These functions support a planned wireless deployment, with access-point placement and channel selection still important in busy rooms or neighbouring wireless networks. Manage One Access Point or a Wider Deployment The browser interface supports individual configuration. For central administration, Nuclias Connect can bring compatible access points into a shared management environment for configuration, monitoring and reporting. Its software is free to download, while a suitable host or separately purchased controller is required. Match the installed firmware, regional hardware and controller version before adoption. Separate Staff and Guest Access Up to eight SSIDs per radio and VLAN configuration let an administrator organise appropriate user groups. WPA2-Personal supports shared-key access, while WPA2-Enterprise can use RADIUS authentication. Captive-portal and client-isolation options add control over visitor access. A suitable router, switch and firewall policy remain part of the complete network design. Bring Power and Data to the Mounting Position The designated PoE LAN port accepts IEEE 802.3at PoE+ power, allowing one cable to carry the access point's network connection and power. The second Gigabit LAN port provides another data connection; it is not specified as a PoE output. An appropriate PoE+ switch or injector is required separately. A power adapter and PoE injector are not included. Fit the Installation to the Network The white indoor enclosure supports wall and ceiling mounting with the supplied mounting equipment. Access-point, WDS bridge, WDS with AP and wireless-client modes suit different supported layouts. Select and configure the required mode before mounting, allow space for the cable route and ventilation, and keep the unit within its indoor operating conditions. Summary The D-Link DAP-2682 suits an indoor business network that needs manageable dual-band Wi-Fi 5, two Gigabit data ports and PoE+ installation. Combine it with appropriate firmware, a compatible management platform and a planned wired and wireless network to make practical use of its radio and access-control features. Frequently Asked Questions Is the DAP-2682 an Internet Router?ExpandCollapse It is a wireless access point. Connect it to an existing network with suitable routing, Internet access and security controls. Its WDS and wireless-client modes serve other supported network arrangements and require the appropriate configuration. What Power Equipment Is Required?ExpandCollapse Use an IEEE 802.3at PoE+ switch or a suitable PoE+ injector, with enough power budget for the access point. Maximum published consumption is 15.5 W. A PoE injector and power adapter are not included. Do Both Ethernet Ports Supply PoE?ExpandCollapse No PoE output is specified. The designated LAN (PoE) port accepts power and data, while the second Gigabit LAN port is a data connection. Do not use the second port as a power source for another device. Does It Include a Hosted Cloud Service?ExpandCollapse Nuclias Connect software is free to download, but central management requires a suitable software host or compatible controller and supported firmware. A separately hosted installation needs its own hosting and network arrangements. Hosting and controller hardware are separate requirements. Does AC2300 Mean 2300 Mbps for One Device?ExpandCollapse No. The class combines published maximum radio rates of 600 Mbps on 2.4 GHz and 1700 Mbps on 5 GHz. Actual client throughput depends on the device, radio conditions, network load and wired infrastructure. Can It Be Installed Outdoors?ExpandCollapse It is designed for indoor use. Use the supplied wall or ceiling mounting equipment in a suitable indoor position, within the published temperature and humidity limits and with an appropriate cable route.
Description
Managed Dual-Band Wi-Fi for Busy Indoor Spaces
The D-Link DAP-2682 brings simultaneous dual-band Wi-Fi 5 to offices, meeting areas and other indoor business spaces. Its AC2300 Wave 2 radio combines MU-MIMO, beamforming and band steering, while two Gigabit Ethernet ports provide wired connectivity at the access point.
Mount it on a wall or ceiling and supply power through an 802.3at PoE+ network connection. Use its browser interface for an individual installation, or organise supported access points through Nuclias Connect with compatible firmware and an appropriate controller or software host.
Highlights
Dual-Band Wireless
- Up to 600 Mbps on 2.4 GHz and 1700 Mbps on 5 GHz
- MU-MIMO and beamforming for compatible clients
- Band steering and automatic channel selection
Managed Business Access
- Standalone configuration or Nuclias Connect management
- Up to 16 SSIDs with VLAN configuration
- WPA2-Personal and WPA2-Enterprise authentication
Practical Indoor Installation
- Two 10/100/1000 Mbps Ethernet ports
- 802.3at PoE+ input on the designated LAN port
- Wall and ceiling mounting plate and hardware
Key Features
Give Clients Two Wireless Bands
Simultaneous 2.4 GHz and 5 GHz operation accommodates a mix of wireless devices. The published radio rates are up to 600 Mbps and 1700 Mbps respectively. AC2300 describes the combined radio class; it is not a 2300 Mbps connection for one device. Practical throughput depends on the client, signal conditions, interference, shared airtime and wired network.
Make Better Use of Shared Airtime
MU-MIMO helps the access point communicate with multiple compatible clients, while beamforming directs transmissions towards supported devices. Band steering can guide suitable clients towards the preferred band. These functions support a planned wireless deployment, with access-point placement and channel selection still important in busy rooms or neighbouring wireless networks.
Manage One Access Point or a Wider Deployment
The browser interface supports individual configuration. For central administration, Nuclias Connect can bring compatible access points into a shared management environment for configuration, monitoring and reporting. Its software is free to download, while a suitable host or separately purchased controller is required. Match the installed firmware, regional hardware and controller version before adoption.
Separate Staff and Guest Access
Up to eight SSIDs per radio and VLAN configuration let an administrator organise appropriate user groups. WPA2-Personal supports shared-key access, while WPA2-Enterprise can use RADIUS authentication. Captive-portal and client-isolation options add control over visitor access. A suitable router, switch and firewall policy remain part of the complete network design.
Bring Power and Data to the Mounting Position
The designated PoE LAN port accepts IEEE 802.3at PoE+ power, allowing one cable to carry the access point's network connection and power. The second Gigabit LAN port provides another data connection; it is not specified as a PoE output. An appropriate PoE+ switch or injector is required separately. A power adapter and PoE injector are not included.
Fit the Installation to the Network
The white indoor enclosure supports wall and ceiling mounting with the supplied mounting equipment. Access-point, WDS bridge, WDS with AP and wireless-client modes suit different supported layouts. Select and configure the required mode before mounting, allow space for the cable route and ventilation, and keep the unit within its indoor operating conditions.
Summary
The D-Link DAP-2682 suits an indoor business network that needs manageable dual-band Wi-Fi 5, two Gigabit data ports and PoE+ installation. Combine it with appropriate firmware, a compatible management platform and a planned wired and wireless network to make practical use of its radio and access-control features.
Frequently Asked Questions
Is the DAP-2682 an Internet Router?
It is a wireless access point. Connect it to an existing network with suitable routing, Internet access and security controls. Its WDS and wireless-client modes serve other supported network arrangements and require the appropriate configuration.
What Power Equipment Is Required?
Use an IEEE 802.3at PoE+ switch or a suitable PoE+ injector, with enough power budget for the access point. Maximum published consumption is 15.5 W. A PoE injector and power adapter are not included.
Do Both Ethernet Ports Supply PoE?
No PoE output is specified. The designated LAN (PoE) port accepts power and data, while the second Gigabit LAN port is a data connection. Do not use the second port as a power source for another device.
Does It Include a Hosted Cloud Service?
Nuclias Connect software is free to download, but central management requires a suitable software host or compatible controller and supported firmware. A separately hosted installation needs its own hosting and network arrangements. Hosting and controller hardware are separate requirements.
Does AC2300 Mean 2300 Mbps for One Device?
No. The class combines published maximum radio rates of 600 Mbps on 2.4 GHz and 1700 Mbps on 5 GHz. Actual client throughput depends on the device, radio conditions, network load and wired infrastructure.
Can It Be Installed Outdoors?
It is designed for indoor use. Use the supplied wall or ceiling mounting equipment in a suitable indoor position, within the published temperature and humidity limits and with an appropriate cable route.
Specs
D-Link DAP-2682 Nuclias Connect AC2300 Wave 2 High-Density (HD) Access Point
The DAP-2682 is an indoor, simultaneous dual-band Wi-Fi 5 access point with two Gigabit Ethernet ports and IEEE 802.3at PoE+ input. It supports standalone configuration and Nuclias Connect management with compatible firmware and a suitable controller or software host. Select the operating mode, power equipment and network-segmentation settings to suit the installation. Published wireless figures are maximum radio link rates; actual throughput varies with client capability, interference, shared airtime and the wired infrastructure. Regional hardware and firmware determine available radio and security settings.
| Specification | Details |
|---|---|
| Wireless Connectivity | |
| Wireless Standard | IEEE 802.11a/b/g/n/ac Wave 2, Wi-Fi 5 |
| Band Operation | Simultaneous 2.4 GHz and 5 GHz |
| Maximum Radio Link Rates | 2.4 GHz up to 600 Mbps; 5 GHz up to 1700 Mbps |
| Antennas | Four internal dual-band antennas |
| Antenna Gain | 3.7 dBi at 2.4 GHz; 4.8 dBi at 5 GHz |
| Radio Features | MU-MIMO, beamforming, band steering, automatic channel selection and Wi-Fi scheduling |
| Published Frequency Ranges | 2.4–2.4835 GHz; 5.15–5.35 GHz and 5.47–5.85 GHz; available channels depend on region and regulations |
| Transmit Power | Regional limits apply; EU published maxima are 16 dBm at 2.4 GHz and 24 dBm at 5 GHz |
| Performance Conditions | Maximum radio rates are not guaranteed throughput; clients, interference, traffic and network conditions affect results |
| Interfaces and Operating Modes | |
| Ethernet Ports | Two 10/100/1000 Mbps RJ45 LAN ports; designated LAN (PoE) port accepts power |
| PoE Output | Not specified; second LAN port is for data |
| Operating Modes | Access Point, WDS bridge, WDS with AP and wireless client |
| Controls and Indicators | Factory-reset control; power/status LED |
| Security and Traffic Management | |
| Authentication | WPA2-Personal and WPA2-Enterprise; internal RADIUS server |
| Wireless Networks | Up to 16 SSIDs in total, eight per radio; VLAN configuration |
| Access Controls | SSID broadcast control, MAC filtering, WLAN partitioning and client isolation |
| Guest Access | Captive portal with supported authentication options |
| Traffic Features | WMM, traffic control, AP load balancing, airtime fairness and bandwidth optimisation; availability depends on mode and firmware |
| Network Services | IPv6, DHCP server, NTP, IGMP snooping and rogue-access-point detection support |
| Management | |
| Individual Configuration | Web browser interface; HTTPS/SSL, SSH and CLI access |
| Central Management | Nuclias Connect software or compatible Nuclias Connect controller |
| Software and Host | Software is free to download; suitable host or controller hardware is separate |
| Central Administration | AP discovery, grouping, configuration, monitoring and reporting with a supported deployment |
| Compatibility Conditions | Hardware region, installed firmware, controller version and operating mode determine available functions |
| Power and Installation | |
| PoE Input | IEEE 802.3at PoE+ |
| DC Input Specification | 12 V / 2.5 A; compatible power adapter is separate |
| Maximum Power Consumption | 15.5 W |
| Installation | Indoor wall or ceiling mounting |
| Required Separately | Suitable network, Ethernet cabling and compatible PoE+ power source or power adapter |
| Physical and Environmental | |
| Dimensions | 190 × 190 × 43.7 mm, width × depth × height |
| Device Weight | EU specification 551.6 g without mounting bracket; 605.2 g with bracket; regional specifications differ |
| Enclosure | White plastic housing |
| Operating Conditions | 0–40 °C; 10–90% relative humidity, non-condensing |
| Storage Conditions | −20–65 °C; 5–95% relative humidity, non-condensing |
| Published MTBF | 341,897 hours; statistical reliability figure, not a guaranteed service life |
| Supplied Equipment | |
| Package Contents | Access point, mounting plate and hardware, quick-start documentation |
| Power Equipment | Power adapter and PoE injector not included |