Ubiquiti UACC-LR-Endpoint Outdoor Long-Range PoE Endpoint

Complete the Long-Range Link at the Device Bring a supported long-range copper connection to the remote device with the Ubiquiti Outdoor Long-Range Endpoint. Designed for the Long-Range Switch 8 PoE, it receives data and power over the extended run and provides PoE++ passthrough to suitable equipment. Its IPX5 enclosure, built-in surge protection and pole-mount arrangement support a considered outdoor installation, with the complete link designed around device load and cable distance. Highlights The Matching Long-Range Component Designed to work with USW-LR-Switch-8-PoE at distances up to 800 m under stated conditions. 10/100 Mb/s network interfaces; a different device from the UACC-LRE Gigabit repeater. Power at the Remote End PoE+++ input and passthrough up to PoE++. Available output power depends on cable distance and the connected device’s demand. Prepared for Outdoor Mounting IPX5-rated polycarbonate enclosure with pole mounting. Built-in 3 kA / 6 kV surge protection and a −40 to 60°C operating range. Key Features Use the Endpoint Specified for the Switch The endpoint is the remote component named by Ubiquiti for the Long-Range Switch 8 PoE system. Use it with that supported switch when the design needs the extended-distance capability. Its input is not a general promise that any PoE injector or ordinary Ethernet switch will deliver the same 800 m performance. Carry Data Within a Clear Speed Limit Both network ports support 10/100 Mb/s. This makes the endpoint a deliberate choice for remote devices whose traffic fits that access speed. It does not turn the extended cable run into a Gigabit connection, even though the Long-Range Switch has a Gigabit combo uplink back to the network. Deliver Only the Power the Link Can Support The endpoint receives PoE+++ power and offers passthrough up to PoE++. The published maximum ratings describe its supported interface, not the power available at every cable length. Check the remote device’s required power against the manufacturer’s cable-distance guidance and allow for the endpoint’s own consumption. Plan an Outdoor Installation as a Complete System The IPX5 housing and pole-mount design support outdoor positioning, while built-in surge protection adds a defined protective feature. Follow the installation guide for orientation, cable entry and mounting. Plan the complete cable route and site protection; an enclosure rating does not describe the whole installed network. Keep Existing Repeater Choices Distinct The UACC-LR-Endpoint and UACC-LRE repeater are separate products with different intended systems and network characteristics. Select this endpoint for the matching Long-Range Switch deployment rather than choosing an accessory by the phrase Long-Range alone. Summary The Outdoor Long-Range Endpoint completes the supported extended copper path from a Long-Range Switch 8 PoE to remote equipment. It combines outdoor-oriented construction, surge protection and PoE passthrough with clearly defined 10/100 Mb/s interfaces. Check the cable distance and device load together so the endpoint supplies the connection the installation actually needs. Frequently Asked Questions Which Switch Does This Endpoint Require?ExpandCollapse It is designed for the Ubiquiti USW-LR-Switch-8-PoE Long-Range Switch 8 PoE. The manufacturer’s extended-distance guidance applies to that matching system with appropriate cabling and installation conditions. Is It the Same as UACC-LRE?ExpandCollapse No. UACC-LR-Endpoint is the dedicated endpoint for the Long-Range Switch system. UACC-LRE is a separate Gigabit Ethernet repeater. Their similar names do not establish interchangeability. Does It Provide Gigabit Ethernet?ExpandCollapse No. The endpoint has two 10/100 Mb/s ports. The switch’s Gigabit combo uplink does not change the endpoint’s access-port speed. How Much Power Is Available at 800 m?ExpandCollapse The endpoint supports passthrough up to PoE++, but available device power falls with cable distance. Ubiquiti publishes distance-power guidance using its official Outdoor Cable. Do not assume the maximum passthrough rating remains available at the maximum distance; check the exact device load and route. Can It Be Used Outdoors?ExpandCollapse The endpoint is IPX5-rated, has built-in 3 kA / 6 kV surge protection and is specified for −40 to 60°C. Follow the installation guide for mounting and cable entry, and design the site’s complete cabling and protection arrangement appropriately. 阅读更多