TP-Link Deco X10-4G AX1500 4G Plus Mesh WiFi 6 Gateway
Bring a mobile-data connection into a managed home mesh Deco X10-4G combines a 4G+ LTE modem, dual-band WiFi 6 and Deco mesh management in one gateway. Insert a compatible nano-SIM with an active data plan to provide a connection where fixed broadband is unavailable or inconvenient. Three Gigabit Ethernet ports also support wired devices and the supported router arrangements. The cellular connection depends on the operator, supported bands, plan and signal at the installation point; a SIM and mobile-data service are purchased separately. Highlights Wireless capability WiFi 6; 5GHz up to 1,201Mbps; 2.4GHz up to 300Mbps. Published radio rates are theoretical, not measured internet speeds. Connections that suit the installation Three Gigabit auto-sensing WAN/LAN ports; nano-SIM slot; two external cellular antenna connectors. Control and compatibility Deco app and compatible Deco expansion. Active internet service and a suitable upstream connection required. Key Features Use a compatible mobile-data plan The built-in LTE-Advanced Cat6 modem supports a published maximum of 300Mbps download and 50Mbps upload. These are radio capability figures rather than an assured mobile service rate. Check the operator bands, SIM provisioning, APN and reception at the intended location. Keep wired and mesh options available Use the three Gigabit ports for supported Ethernet WAN/LAN connections and compatible wired devices. Deco integration offers a route to expand coverage with other compatible Deco units. This is a mains-powered gateway, not a battery-powered pocket hotspot. Match the wireless capability to the clients 5GHz up to 1,201Mbps; 2.4GHz up to 300Mbps. Actual speed depends on the router or access point, client hardware, channel conditions, distance and internet service. A combined wireless class is not a promise of single-device throughput. A WiFi 6 router does not upgrade the cellular network’s available capacity. Keep setup and day-to-day control accessible Use the Deco app to configure the network, manage connected devices and maintain firmware. Cellular, Ethernet router and access-point modes. Keep a record of the network settings and choose a supported secure wireless configuration. Choose the services and installation you need A compatible nano-SIM and active mobile-data plan are required for cellular use. Check operator coverage, supported bands and APN settings before relying on it as the main connection. Protect accounts and maintain the appropriate device and network updates. Summary Deco X10-4G combines WiFi 6 with Deco mesh control. Match the internet handoff, local devices and installation to the actual ports and supported modes. With sensible placement and current firmware, it provides a practical foundation for the network described above. Frequently Asked Questions Does it include a mobile-data service?ExpandCollapse No. Supply a compatible nano-SIM and an active plan. Check the operator’s bands, APN, coverage and roaming terms. The gateway is mains-powered and does not include a battery. What wired ports does it have?ExpandCollapse Three Gigabit auto-sensing WAN/LAN ports; nano-SIM slot; two external cellular antenna connectors. Match the internet handoff, cabling and connected devices to these rates. Can it expand an existing Deco network?ExpandCollapse Use compatible Deco units and appropriate firmware. Placement and backhaul quality affect results. EasyMesh and Omada are separate management platforms, so do not assume they form one managed Deco mesh. Is the wireless class my actual internet speed?ExpandCollapse No. Actual speed depends on the router or access point, client hardware, channel conditions, distance and internet service. A combined wireless class is not a promise of single-device throughput. What power, package and warranty apply?ExpandCollapse One gateway, power adapter, Ethernet cable, two SMB-to-SMA antenna adapters and guide are supplied; external cellular antennas are separate. Warranty is 3 years. Confirm that the regional power arrangement suits the destination.
可在 3005, Ubi Avenue 3, #01-88 提货
通常在 2 至 4 个工作日内备妥(公共假期除外)
TP-Link Deco X10-4G AX1500 4G Plus Mesh WiFi 6 Gateway
描述
Bring a mobile-data connection into a managed home mesh
Deco X10-4G combines a 4G+ LTE modem, dual-band WiFi 6 and Deco mesh management in one gateway. Insert a compatible nano-SIM with an active data plan to provide a connection where fixed broadband is unavailable or inconvenient. Three Gigabit Ethernet ports also support wired devices and the supported router arrangements. The cellular connection depends on the operator, supported bands, plan and signal at the installation point; a SIM and mobile-data service are purchased separately.
Highlights
Wireless capability
- WiFi 6; 5GHz up to 1,201Mbps; 2.4GHz up to 300Mbps.
- Published radio rates are theoretical, not measured internet speeds.
Connections that suit the installation
- Three Gigabit auto-sensing WAN/LAN ports; nano-SIM slot; two external cellular antenna connectors.
Control and compatibility
- Deco app and compatible Deco expansion.
- Active internet service and a suitable upstream connection required.
Key Features
Use a compatible mobile-data plan
The built-in LTE-Advanced Cat6 modem supports a published maximum of 300Mbps download and 50Mbps upload. These are radio capability figures rather than an assured mobile service rate. Check the operator bands, SIM provisioning, APN and reception at the intended location.
Keep wired and mesh options available
Use the three Gigabit ports for supported Ethernet WAN/LAN connections and compatible wired devices. Deco integration offers a route to expand coverage with other compatible Deco units. This is a mains-powered gateway, not a battery-powered pocket hotspot.
Match the wireless capability to the clients
5GHz up to 1,201Mbps; 2.4GHz up to 300Mbps. Actual speed depends on the router or access point, client hardware, channel conditions, distance and internet service. A combined wireless class is not a promise of single-device throughput. A WiFi 6 router does not upgrade the cellular network’s available capacity.
Keep setup and day-to-day control accessible
Use the Deco app to configure the network, manage connected devices and maintain firmware. Cellular, Ethernet router and access-point modes. Keep a record of the network settings and choose a supported secure wireless configuration.
Choose the services and installation you need
A compatible nano-SIM and active mobile-data plan are required for cellular use. Check operator coverage, supported bands and APN settings before relying on it as the main connection. Protect accounts and maintain the appropriate device and network updates.
Summary
Deco X10-4G combines WiFi 6 with Deco mesh control. Match the internet handoff, local devices and installation to the actual ports and supported modes. With sensible placement and current firmware, it provides a practical foundation for the network described above.
Frequently Asked Questions
Does it include a mobile-data service?
No. Supply a compatible nano-SIM and an active plan. Check the operator’s bands, APN, coverage and roaming terms. The gateway is mains-powered and does not include a battery.
What wired ports does it have?
Three Gigabit auto-sensing WAN/LAN ports; nano-SIM slot; two external cellular antenna connectors. Match the internet handoff, cabling and connected devices to these rates.
Can it expand an existing Deco network?
Use compatible Deco units and appropriate firmware. Placement and backhaul quality affect results. EasyMesh and Omada are separate management platforms, so do not assume they form one managed Deco mesh.
Is the wireless class my actual internet speed?
No. Actual speed depends on the router or access point, client hardware, channel conditions, distance and internet service. A combined wireless class is not a promise of single-device throughput.
What power, package and warranty apply?
One gateway, power adapter, Ethernet cable, two SMB-to-SMA antenna adapters and guide are supplied; external cellular antennas are separate. Warranty is 3 years. Confirm that the regional power arrangement suits the destination.
规格
TP-Link Deco X10-4G AX1500 4G Plus Mesh WiFi 6 Gateway
TP-Link Deco X10-4G AX1500 4G Plus Mesh WiFi 6 Gateway combines WiFi 6 connectivity with the interfaces listed below. The grouped specifications distinguish theoretical wireless rates from physical connection limits, and identify the upstream equipment and operating modes needed for a working installation. Match the network hardware, cabling and regional power arrangement before ordering. Actual throughput depends on the complete connection and radio conditions; a headline wireless class is not a guaranteed internet download rate. Use the current manufacturer firmware for the exact model.
| Specification | Details |
|---|---|
| Wireless Capability | |
| Standard | WiFi 6; IEEE 802.11ax. |
| Maximum radio link rates | 5GHz up to 1,201Mbps; 2.4GHz up to 300Mbps. |
| Performance conditions | Theoretical radio rates; actual throughput depends on clients, interfaces, distance, interference and internet service. |
| Security | Supported WPA2/WPA3 configurations; functions depend on mode, client and driver. |
| Interfaces and Installation | |
| Connections | Three Gigabit auto-sensing WAN/LAN ports; nano-SIM slot; two external cellular antenna connectors. |
| Operating Modes and Management | |
| Modes and setup | Cellular, Ethernet router or access point; Deco app. |
| Mesh platform | Deco with compatible Deco units. |
| Cellular Connection | |
| Modem and SIM | LTE-Advanced Cat6; up to 300Mbps download / 50Mbps upload; nano-SIM and active plan required. |
| LTE bands | FDD B1/B3/B5/B7/B8/B20/B28; TDD B38/B40/B41. |
| External antenna connection | Two SMB cellular antenna ports; two SMB-to-SMA adapters included; external antennas separate. |
| Mobile performance | Actual service depends on operator, plan, coverage, signal and APN configuration. |
| Power | |
| Power arrangement | Supplied external power adapter; one per Deco unit. |
| Regional connection | Use the supplied regional plug and voltage arrangement appropriate for the destination. |
| Physical and Environment | |
| Dimensions | 105 × 105 × 167mm (W × D × H). |
| Operating conditions | 0 to 40°C; 10–90% RH, non-condensing. |
| Package and Warranty | |
| Included | One gateway, power adapter, Ethernet cable, two SMB-to-SMA antenna adapters and guide. |
| Warranty | 3 years. |








