Synology Disk Holder (Type C) Replacement Drive Mount
A precise mechanical fit for your Synology drive bay Synology Disk Holder (Type C) Replacement Drive Mount is a genuine model-specific replacement for compatible Synology systems, including DS223j, DS220j, DS218play. It replaces the specified drive carrier or holder so a missing or damaged mounting part can be addressed without choosing a generic caddy by appearance. 2.5" Drive Holder. This offer is the replacement mounting component; a drive and NAS enclosure are separate. Match the complete tray or holder type with the supported host and any serial-number condition below. Highlights Mechanical fit 2.5" Drive Holder Compatible systems include DS223j, DS220j, DS218play Exact tray or holder type Service preparation Manufacturer dimensions 115 × 103 × 15 mm Part weight 0.04 kg 1 year warranty Key Features Select the correct carrier type Synology uses different trays and holders across its storage ranges. Latches, mounting points and dimensions can differ even when two carriers look similar. Supported systems include DS223j, DS220j, DS218play; use the complete list below for the exact match. Retain the intended drive mounting 2.5" Drive Holder. Follow the host hardware guide for the supported drive form factor, required fasteners and fitting procedure. The replacement carrier does not change the drive interface or media compatibility of the NAS. Preserve important revision details For DS209+II, serial-number pattern **GCN***** applies. For DS209, serial-number pattern **G4N***** applies. Repair the mounting component This is a mechanical service part. It does not add a drive bay, create storage capacity or make an unsupported drive compatible. Confirm the required mounting part before ordering and keep storage-media selection separate. Keep existing drive order clear When working with an existing storage array, identify each drive and its original bay before removing components. Follow the host’s hardware and storage-management instructions so a mounting repair does not become an unintended storage reconfiguration. Prepare a useful service spare Manufacturer dimensions are 115 × 103 × 15 mm, with a part weight of 0.04 kg. Keep the exact carrier type with the host’s maintenance record so future service does not depend on identifying a part from a photograph alone. Compatible Models DiskStation DS223j, DS220j, DS218play, DS218j, DS216play, DS216j, DS216se, DS215j, DS214se, DS213j, DS212j, DS211, DS211j, DS210+, DS210j, DS209+II, DS209, DS124, DS120j, DS119j, DS118, DS116, DS115, DS115j, DS114, DS112, DS112j, DS111, DS110+, DS110j, DS109+, DS109, DS109j Network Video Recorder NVR216, NVR1218 Compatibility notes For DS209+II, serial-number pattern **GCN***** applies. For DS209, serial-number pattern **G4N***** applies. Summary Synology Disk Holder (Type C) Replacement Drive Mount provides a clearly identified genuine replacement for the compatible Synology systems listed below. Match the host and exact part, retain any compatibility condition and follow the equipment guide for a controlled repair. Frequently Asked Questions Which systems does this mounting part fit?ExpandCollapse Use the complete Compatible Models section below, including any serial-number condition. Bay count alone is not a compatibility test. Is a hard drive or SSD included?ExpandCollapse No. This listing covers the specified replacement tray or holder only. Storage media and the NAS enclosure are separate. Can I use a similar-looking carrier?ExpandCollapse Do not assume interchangeability. Latches, mounting points and dimensions can differ between carrier types and chassis revisions. Does it change the NAS drive compatibility?ExpandCollapse No. The host still determines the supported drive interface, form factor and media compatibility. Are there serial-number restrictions?ExpandCollapse For DS209+II, serial-number pattern **GCN***** applies. For DS209, serial-number pattern **G4N***** applies. What warranty is included?ExpandCollapse This genuine Synology spare part has a 1 year warranty. Installation and any separate diagnostic or repair service are arranged separately.
可在 3005, Ubi Avenue 3, #01-88 提货
通常在 2 至 4 个工作日内备妥（公共假期除外）
Synology Disk Holder (Type C) Replacement Drive Mount
描述
A precise mechanical fit for your Synology drive bay
Synology Disk Holder (Type C) Replacement Drive Mount is a genuine model-specific replacement for compatible Synology systems, including DS223j, DS220j, DS218play. It replaces the specified drive carrier or holder so a missing or damaged mounting part can be addressed without choosing a generic caddy by appearance.
2.5" Drive Holder. This offer is the replacement mounting component; a drive and NAS enclosure are separate. Match the complete tray or holder type with the supported host and any serial-number condition below.
Highlights
Mechanical fit
- 2.5" Drive Holder
- Compatible systems include DS223j, DS220j, DS218play
- Exact tray or holder type
Service preparation
- Manufacturer dimensions 115 × 103 × 15 mm
- Part weight 0.04 kg
- 1 year warranty
Key Features
Select the correct carrier type
Synology uses different trays and holders across its storage ranges. Latches, mounting points and dimensions can differ even when two carriers look similar. Supported systems include DS223j, DS220j, DS218play; use the complete list below for the exact match.
Retain the intended drive mounting
2.5" Drive Holder. Follow the host hardware guide for the supported drive form factor, required fasteners and fitting procedure. The replacement carrier does not change the drive interface or media compatibility of the NAS.
Preserve important revision details
For DS209+II, serial-number pattern **GCN***** applies. For DS209, serial-number pattern **G4N***** applies.
Repair the mounting component
This is a mechanical service part. It does not add a drive bay, create storage capacity or make an unsupported drive compatible. Confirm the required mounting part before ordering and keep storage-media selection separate.
Keep existing drive order clear
When working with an existing storage array, identify each drive and its original bay before removing components. Follow the host’s hardware and storage-management instructions so a mounting repair does not become an unintended storage reconfiguration.
Prepare a useful service spare
Manufacturer dimensions are 115 × 103 × 15 mm, with a part weight of 0.04 kg. Keep the exact carrier type with the host’s maintenance record so future service does not depend on identifying a part from a photograph alone.
Compatible Models
DiskStation
DS223j, DS220j, DS218play, DS218j, DS216play, DS216j, DS216se, DS215j, DS214se, DS213j, DS212j, DS211, DS211j, DS210+, DS210j, DS209+II, DS209, DS124, DS120j, DS119j, DS118, DS116, DS115, DS115j, DS114, DS112, DS112j, DS111, DS110+, DS110j, DS109+, DS109, DS109j
Network Video Recorder
NVR216, NVR1218
Compatibility notes
For DS209+II, serial-number pattern **GCN***** applies. For DS209, serial-number pattern **G4N***** applies.
Summary
Synology Disk Holder (Type C) Replacement Drive Mount provides a clearly identified genuine replacement for the compatible Synology systems listed below. Match the host and exact part, retain any compatibility condition and follow the equipment guide for a controlled repair.
Frequently Asked Questions
Which systems does this mounting part fit?
Use the complete Compatible Models section below, including any serial-number condition. Bay count alone is not a compatibility test.
Is a hard drive or SSD included?
No. This listing covers the specified replacement tray or holder only. Storage media and the NAS enclosure are separate.
Can I use a similar-looking carrier?
Do not assume interchangeability. Latches, mounting points and dimensions can differ between carrier types and chassis revisions.
Does it change the NAS drive compatibility?
No. The host still determines the supported drive interface, form factor and media compatibility.
Are there serial-number restrictions?
For DS209+II, serial-number pattern **GCN***** applies. For DS209, serial-number pattern **G4N***** applies.
What warranty is included?
This genuine Synology spare part has a 1 year warranty. Installation and any separate diagnostic or repair service are arranged separately.
规格
Synology Disk Holder (Type C) Replacement Drive Mount
Synology Disk Holder (Type C) Replacement Drive Mount is a model-specific Synology service component. The table brings together its manufacturer-listed format, physical details and complete compatible host list. Match the original fitted part and retain any regional, revision or serial-number restriction when selecting a replacement. A similar appearance, equal power rating or shared bay count does not establish interchangeability. The exact host hardware guide determines fitting, handling and shutdown requirements; the storage system and any separately required media or service are not included.
| Specification | Details |
|---|---|
| Component and Format | |
| Component format | 2.5" Drive Holder |
| Supply | Replacement carrier or holder; drives and NAS not included |
| Compatible Models | |
| DiskStation | DS223j, DS220j, DS218play, DS218j, DS216play, DS216j, DS216se, DS215j, DS214se, DS213j, DS212j, DS211, DS211j, DS210+, DS210j, DS209+II, DS209, DS124, DS120j, DS119j, DS118, DS116, DS115, DS115j, DS114, DS112, DS112j, DS111, DS110+, DS110j, DS109+, DS109, DS109j |
| Network Video Recorder | NVR216, NVR1218 |
| Compatibility notes | For DS209+II, serial-number pattern **GCN***** applies. For DS209, serial-number pattern **G4N***** applies. |
| Physical Details | |
| Manufacturer part dimensions | 115 × 103 × 15 mm |
| Part weight | 0.04 kg |
| Installation and Warranty | |
| Installation | Follow the exact host hardware guide and service procedure |
| Warranty | 1 year |