Insta360 X6 All-Weather USB Charging Cover

Keep Recording When The Weather Changes The Insta360 X6 All-Weather USB Charging Cover provides a practical connection for externally powered shooting in changeable weather. It replaces the standard USB Cover and maintains IPX4 splash resistance while a suitable cable is connected. A built-in silicone plug closes the opening between uses, and compatibility with the X6 Protective Utility Frame and dedicated Quick Reader helps keep your recording setup together. Highlights IPX4 splash resistance while connected for charging Integrated silicone plug for the USB-C opening between uses Designed specifically for Insta360 X6 Compatible with the X6 Protective Utility Frame Supports the dedicated Insta360 Quick Reader Portable SSD connection Key Features External Power For Rainy-Day Recording Replace the standard cover when you need to charge X6 while recording in rainy conditions. The All-Weather cover is rated IPX4 under laboratory conditions, helping protect the connection from splashes. Avoid prolonged heavy rain and keep the connected power source waterproof; the cover does not protect an exposed charger or power bank. Close The Opening Between Uses An integrated silicone plug covers the USB-C opening when you are not charging. Close it to help keep dust, sand and water away from the port. Before installation or charging, make sure the camera, cable connector and port are clean and completely dry. A Coordinated X6 Accessory Setup The cover works with the X6 Protective Utility Frame and the Insta360 Quick Reader 512GB Portable SSD. This allows the dedicated reader to connect without substituting a different model’s cover. The cover itself adds no storage capacity and does not make an arbitrary USB-C SSD a supported camera recorder. Small Enough To Keep With Your Camera Kit The plastic and silicone accessory weighs 1.6 g and measures 23.6 × 20.2 × 12 mm. Keep the standard USB Cover safely when swapping it out, use a cable connector that fits the manufacturer’s guide and avoid forcing the cover or cable into position. Switch Back For Underwater Shooting IPX4 is splash resistance rather than protection for submersion. For underwater use, remove this cover and refit the camera’s standard USB Cover, ensuring it is firmly closed. If the camera gets wet, dry it thoroughly and remove trapped water around the cover before opening it. Summary The X6 All-Weather USB Charging Cover is a compact accessory for powered recording in light wet conditions. Use it with a correctly fitted cable and protected power source, then return to the standard cover whenever the camera will be submerged. Frequently Asked Questions Can I Charge X6 While Recording In The Rain?ExpandCollapse Yes, with the cover correctly fitted and a suitable cable connected. It provides IPX4 splash resistance under the manufacturer’s test conditions. Avoid prolonged heavy rain, and ensure the connected power source is waterproof. Can I Take This Cover Underwater?ExpandCollapse No. This cover is splash-resistant only and must not be submerged. Replace it with the standard USB Cover and close that cover securely before underwater use. Does It Fit The X6 Protective Utility Frame?ExpandCollapse Yes. Insta360 lists the X6 Protective Utility Frame as compatible. Both are model-specific accessories; the frame is not included with this cover. Which Quick Reader Does It Support?ExpandCollapse Insta360 specifies its Quick Reader 512GB Portable SSD. This does not establish compatibility with every USB-C reader or SSD. The reader is sold separately. Are A Cable And Power Source Included?ExpandCollapse No. The box contains one All-Weather USB Charging Cover. Use a suitable cable, preferably an official Insta360 cable, and a protected power source. The camera, reader and frame are sold separately. 阅读更多