D-Link DWR-M930DS Dual-SIM 4G LTE N300 Wi-Fi Router
Keep a Second SIM Ready When Connectivity Matters The D-Link DWR-M930DS is a 4G LTE Cat4 router with N300 Wi-Fi 4 on 2.4GHz, designed for a small site that wants a second mobile-data service available as a backup, alongside Wi-Fi and wired connections. Insert a compatible active SIM, configure the mobile service and share the connection with wireless and Ethernet devices. Two Nano SIM slots provide an active service and a standby connection. This is failover rather than bonding: the router does not combine two SIM plans into one faster link. Ethernet WAN provides another connection option when configured for the installation. Highlights Mobile Broadband and Wi-Fi 4G LTE Cat4 N300 Wi-Fi 4 on 2.4GHz 2 × Nano SIM slots; one active connection and one standby SIM Connections for Your Setup 1 × 10/100Mbps WAN/LAN; 2 × 10/100Mbps LAN Active and standby SIM configuration Practical Management Web management; DHCP, DDNS, QoS, port forwarding and IPv6 WPA/WPA2/WPA3; NAT/SPI firewall; IP and MAC filtering 3-year hardware warranty Key Features Share a Mobile-Data Connection DWR-M930DS connects through a compatible operator SIM and data plan. Check the operator's supported bands, APN requirements and router-use policy before installation. Cellular headline rates are theoretical radio capabilities; coverage, congestion, plan limits, signal strength and the connected device determine actual performance. Keep Everyday Wi-Fi Straightforward The 2.4GHz N300 network provides a familiar connection for compatible laptops, phones and everyday network equipment. It does not provide a separate 5GHz Wi-Fi band. Keep the router away from obstructions and interference, and use Ethernet for equipment that needs a stable local wired link. Connect Wired Equipment with the Right Port 1 × 10/100Mbps WAN/LAN; 2 × 10/100Mbps LAN. These are Fast Ethernet ports, so a wired link is limited to 100Mbps even where the cellular service or Wi-Fi radio can advertise a higher headline rate. Plan Failover Rather than Assume No Interruption Configure the two SIM services and Ethernet WAN priorities for the intended site. A failover can interrupt sessions while a different service connects, and backup service must have usable coverage and an active plan. Two SIM slots do not mean dual-active radios or combined bandwidth. Choose Placement and Security Carefully Set up this indoor router where the mobile signal is usable and ventilation remains clear. WPA/WPA2/WPA3; NAT/SPI firewall; IP and MAC filtering. IPsec VPN pass-through. These controls support a managed network, but do not guarantee protection from every threat or replace secure client devices and sensible access settings. Summary Choose the D-Link DWR-M930DS when 4G LTE Cat4, N300 Wi-Fi 4 on 2.4GHz and its specific wired interfaces match the site. Plan the mobile service and placement first, then use the router's available controls to build a clear, manageable connection for the devices that matter. Frequently Asked Questions Does the DWR-M930DS Need a SIM and Mobile Plan?ExpandCollapse Yes. A compatible active SIM and an appropriate mobile-data plan are required for cellular internet. They are not supplied with the router. Confirm supported bands, APN details and any operator restrictions on router use. Is This a 4G or 5G Cellular Router?ExpandCollapse It is a 4G LTE Cat4 router, not a 5G cellular router. LTE download up to 150 Mbps; upload up to 50 Mbps. Headline rates are theoretical and actual mobile speeds vary. What Wired Connections Are Available?ExpandCollapse 1 × 10/100Mbps WAN/LAN; 2 × 10/100Mbps LAN. These are 100Mbps Fast Ethernet interfaces, not Gigabit ports. Can the Two SIMs Combine Their Speeds?ExpandCollapse No. One SIM provides the active connection and the other is available as a backup. Configure failover and service priorities for the site. Switching connections can interrupt sessions; it is not bonded or dual-active mobile broadband. Does N300 Provide 5GHz Wi-Fi?ExpandCollapse No. This N300 model uses the 2.4GHz Wi-Fi band. Choose a dual-band model if a separate 5GHz Wi-Fi connection is required. Wi-Fi rates and mobile internet speeds describe different parts of the connection. What Should I Check Before Buying?ExpandCollapse Confirm the operator's bands and plan policy, SIM requirements, wired port speeds and the installation's power arrangements. 3-year hardware warranty is provided; it is not a commitment to a fixed firmware-support period.
可在 3005, Ubi Avenue 3, #01-88 提货
通常在 2 至 4 个工作日内备妥(公共假期除外)
D-Link DWR-M930DS Dual-SIM 4G LTE N300 Wi-Fi Router
描述
Keep a Second SIM Ready When Connectivity Matters
The D-Link DWR-M930DS is a 4G LTE Cat4 router with N300 Wi-Fi 4 on 2.4GHz, designed for a small site that wants a second mobile-data service available as a backup, alongside Wi-Fi and wired connections. Insert a compatible active SIM, configure the mobile service and share the connection with wireless and Ethernet devices.
Two Nano SIM slots provide an active service and a standby connection. This is failover rather than bonding: the router does not combine two SIM plans into one faster link. Ethernet WAN provides another connection option when configured for the installation.
Highlights
Mobile Broadband and Wi-Fi
- 4G LTE Cat4
- N300 Wi-Fi 4 on 2.4GHz
- 2 × Nano SIM slots; one active connection and one standby SIM
Connections for Your Setup
- 1 × 10/100Mbps WAN/LAN; 2 × 10/100Mbps LAN
- Active and standby SIM configuration
Practical Management
- Web management; DHCP, DDNS, QoS, port forwarding and IPv6
- WPA/WPA2/WPA3; NAT/SPI firewall; IP and MAC filtering
- 3-year hardware warranty
Key Features
Share a Mobile-Data Connection
DWR-M930DS connects through a compatible operator SIM and data plan. Check the operator's supported bands, APN requirements and router-use policy before installation. Cellular headline rates are theoretical radio capabilities; coverage, congestion, plan limits, signal strength and the connected device determine actual performance.
Keep Everyday Wi-Fi Straightforward
The 2.4GHz N300 network provides a familiar connection for compatible laptops, phones and everyday network equipment. It does not provide a separate 5GHz Wi-Fi band. Keep the router away from obstructions and interference, and use Ethernet for equipment that needs a stable local wired link.
Connect Wired Equipment with the Right Port
1 × 10/100Mbps WAN/LAN; 2 × 10/100Mbps LAN. These are Fast Ethernet ports, so a wired link is limited to 100Mbps even where the cellular service or Wi-Fi radio can advertise a higher headline rate.
Plan Failover Rather than Assume No Interruption
Configure the two SIM services and Ethernet WAN priorities for the intended site. A failover can interrupt sessions while a different service connects, and backup service must have usable coverage and an active plan. Two SIM slots do not mean dual-active radios or combined bandwidth.
Choose Placement and Security Carefully
Set up this indoor router where the mobile signal is usable and ventilation remains clear. WPA/WPA2/WPA3; NAT/SPI firewall; IP and MAC filtering. IPsec VPN pass-through. These controls support a managed network, but do not guarantee protection from every threat or replace secure client devices and sensible access settings.
Summary
Choose the D-Link DWR-M930DS when 4G LTE Cat4, N300 Wi-Fi 4 on 2.4GHz and its specific wired interfaces match the site. Plan the mobile service and placement first, then use the router's available controls to build a clear, manageable connection for the devices that matter.
Frequently Asked Questions
Does the DWR-M930DS Need a SIM and Mobile Plan?
Yes. A compatible active SIM and an appropriate mobile-data plan are required for cellular internet. They are not supplied with the router. Confirm supported bands, APN details and any operator restrictions on router use.
Is This a 4G or 5G Cellular Router?
It is a 4G LTE Cat4 router, not a 5G cellular router. LTE download up to 150 Mbps; upload up to 50 Mbps. Headline rates are theoretical and actual mobile speeds vary.
What Wired Connections Are Available?
1 × 10/100Mbps WAN/LAN; 2 × 10/100Mbps LAN. These are 100Mbps Fast Ethernet interfaces, not Gigabit ports.
Can the Two SIMs Combine Their Speeds?
No. One SIM provides the active connection and the other is available as a backup. Configure failover and service priorities for the site. Switching connections can interrupt sessions; it is not bonded or dual-active mobile broadband.
Does N300 Provide 5GHz Wi-Fi?
No. This N300 model uses the 2.4GHz Wi-Fi band. Choose a dual-band model if a separate 5GHz Wi-Fi connection is required. Wi-Fi rates and mobile internet speeds describe different parts of the connection.
What Should I Check Before Buying?
Confirm the operator's bands and plan policy, SIM requirements, wired port speeds and the installation's power arrangements. 3-year hardware warranty is provided; it is not a commitment to a fixed firmware-support period.
规格
D-Link DWR-M930DS Dual-SIM 4G LTE N300 Wi-Fi Router
The D-Link DWR-M930DS combines 4G LTE Cat4 mobile connectivity with N300 Wi-Fi 4 on 2.4GHz for an indoor shared network. Its Ethernet interfaces, SIM arrangement and power requirements determine how it fits into the installation. The specifications below distinguish cellular radio rates from local Wi-Fi and wired links, and include supported bands, management functions, physical details and environmental limits. Check operator compatibility and actual coverage before selecting a mobile-data service.
| Specification | Details |
|---|---|
| Cellular Connectivity | |
| Cellular Technology | 4G LTE Cat4 |
| Cellular Data Rates | LTE download up to 150 Mbps; upload up to 50 Mbps; theoretical maximums, service-dependent |
| SIM Interface | 2 × Nano SIM slots; one active connection and one standby SIM |
| Supported Cellular Bands | LTE FDD B1/3/5/7/8/20/28; TDD B38/40/41; WCDMA B1/5/8 |
| Antenna System | 2 × 5dBi LTE and 2 × 5dBi Wi-Fi external antennas |
| Wi-Fi and Wired Networking | |
| Wi-Fi Standard and Class | N300 Wi-Fi 4 on 2.4GHz |
| Wireless Link Rates | Up to 300 Mbps (HT40); up to 144 Mbps (HT20) |
| Network Interfaces | 1 × 10/100Mbps WAN/LAN; 2 × 10/100Mbps LAN |
| Wireless Client Reference | Manufacturer lists up to 32 connected clients; capacity is not a throughput or coverage guarantee |
| Network Modes | Router, access point, wireless client, WISP and repeater |
| Management and Security | |
| Wireless and Network Security | WPA/WPA2/WPA3; NAT/SPI firewall; IP and MAC filtering |
| Management and Services | Web management; DHCP, DDNS, QoS, port forwarding and IPv6 |
| VPN Functions | IPsec VPN pass-through |
| SIM Operation | One active SIM and one standby SIM; failover, not bandwidth bonding |
| Connection Resilience | Configured alternate WAN/cellular route; switching and recovery depend on the available service |
| Physical and Power | |
| Dimensions | 222 × 147 × 42 mm |
| Device Weight | 240 g |
| Power | 12V DC / 1A adapter; 100–240V AC input |
| Installation | Indoor use; maintain ventilation and check mobile-signal conditions |
| Environment | |
| Operating Temperature | −10 to 40°C |
| Storage Temperature | −40 to 70°C |
| Humidity | Operating and storage 10–95% RH, non-condensing |
| Warranty and Deployment | |
| Warranty | 3 years |
| Security Updates | D-Link commits to security updates until 31-Dec-2027. Extended support and individual patch releases remain at D-Link's discretion. This commitment is separate from the hardware warranty. |
| Service Requirements | Compatible operator SIM and data plan; usable coverage; suitable power source |
| Performance Conditions | Cellular and Wi-Fi rates are theoretical. Actual throughput depends on network, plan, client, placement and radio conditions |







