D-Link DIS-210G-12UP 12-Port Gigabit Industrial Managed PoE++ Switch

Managed Connectivity Built for the Industrial Edge The DIS-210G-12UP brings eight Gigabit Ethernet connections and four Gigabit SFP slots into a compact industrial cabinet. It connects controllers, cameras and other networked equipment while leaving room for separately chosen fibre links between protected locations. A fanless IP40 metal housing, DIN-rail mounting and a −40°C to 75°C operating range support installations beyond a typical office. Two powered ports support up to 60 W each and six support up to 30 W each, within a shared 240 W PoE budget. VLANs, static routing, Ethernet ring protection and network diagnostics give the administrator useful control at the edge. The external DC supply and optical modules are selected separately for the actual installation. Highlights Industrial Access 8 × 10/100/1000BASE-T and 4 × Gigabit SFP slots. 24 Gbps switching capacity and up to 17.85 Mpps forwarding. Fanless IP40 metal housing and DIN-rail mounting. Power and Environment Dual 48–55 V DC terminal-block inputs; DC supply purchased separately. 2 × up to 60 W PoE++ and 6 × up to 30 W PoE+; 240 W shared budget. −40°C to 75°C operation. Network Control VLANs, IPv4/IPv6 static routing and ERPS. Web interface, CLI, security controls and Ethernet OAM. 5-year warranty. Key Features A Compact Industrial Installation The metal enclosure mounts on a DIN rail inside an appropriate equipment cabinet. Fanless cooling removes a moving part and helps keep the installation quiet. IP40 describes the enclosure protection; it is not a waterproof outdoor rating. Provide suitable protection from moisture, grounding and ventilation for the site. Eight Copper Connections and Four Fibre Choices Eight Gigabit copper ports connect nearby devices, while four dedicated SFP slots support separately specified Gigabit optical links. The SFP slots are not 10GbE uplinks. Match supported optics, fibre type, wavelength and link loss at both ends rather than selecting a module by connector shape alone. Size the Power System Deliberately Dual 48–55 V DC terminal inputs support a redundant-power arrangement when two appropriate external sources are installed. A DC supply is not included. Allow for the total endpoint load, switch consumption and suitable headroom; the advertised PoE budget depends on an adequately rated power system. Power for Demanding Endpoints Ports 1–2 support IEEE 802.3bt power up to 60 W per port, while ports 3–8 support IEEE 802.3af/at up to 30 W. The shared limit remains 240 W; maximum ratings cannot all be added together without checking the total load. Endpoint power also depends on the Ethernet standard and cable losses. Control Traffic and Recovery VLANs separate services, while static routing connects selected local networks. ERPS, spanning-tree protocols and link aggregation support a planned resilient topology. Configure and test the complete network, including upstream equipment; an extra cable alone does not establish safe failover or replace the network security policy. Useful Tools When a Link Needs Attention The web interface and CLI provide configuration access. Cable diagnostics, logs and Ethernet OAM help investigate faults, and access controls restrict management according to the site policy. Set secure credentials, use supported firmware and plan how the switch will be reached for maintenance before installing it in a remote cabinet. Summary The DIS-210G-12UP combines managed Gigabit access, four fibre uplinks and industrial construction with a planned PoE power system. Specify the external DC supply, supported optics and cabinet protection alongside the switch for a complete installation. Frequently Asked Questions Is a Power Supply Included?ExpandCollapse No. A suitable external 48–55 V DC supply is required. Size it for the switch and the intended PoE load, with appropriate headroom. What Is the PoE Port Layout?ExpandCollapse Ports 1–2 support up to 60 W each, and ports 3–8 support up to 30 W each. All powered ports share the 240 W budget. Are the Fibre Slots 10GbE?ExpandCollapse No. The four SFP slots are Gigabit connections. Select compatible Gigabit SFP modules and the correct fibre for the intended distance. Can It Be Installed Outdoors?ExpandCollapse Install it inside a suitable protective enclosure. The IP40 housing and industrial temperature range do not make the switch waterproof. Does It Support Ring Redundancy?ExpandCollapse Yes. ERPS and spanning-tree protocols support planned resilient network designs. The topology and compatible equipment must be configured and failover tested. Does It Include Cloud Management?ExpandCollapse This offer is an industrial managed switch with web and CLI administration. It is not presented as a D-Lite Cloud model or as including a separate cloud-management subscription. 阅读更多