D-Link DIS-100G-10P 10-Port Gigabit Industrial Unmanaged PoE+ Switch

Reliable Connectivity Beyond the Office The DIS-100G-10P connects equipment in industrial cabinets, production areas and protected surveillance installations. 8 Gigabit Ethernet ports and two Gigabit SFP slots provide a practical mix of local copper connections and separately specified fibre links. Its fanless metal enclosure mounts on a DIN rail and supports operation from −40°C to 75°C. Eight PoE+ ports supply up to 30W each within a 240W shared budget. Plug-and-play unmanaged operation keeps straightforward network extensions simple without introducing a switch-management interface. Highlights Industrial Connectivity 8 × 10/100/1000BASE-T PoE+ and 2 × Gigabit SFP slots. 20 Gbps switching capacity and up to 14.88 Mpps forwarding. Fanless DIN-rail design for industrial cabinets. Power and Installation Dual 48–57 V DC terminal-block inputs; suitable DC power supply required separately. Up to 240W shared PoE+ power and 30W per powered port. IP30 metal housing and −40°C to 75°C operating range. Network Operation Unmanaged operation without software configuration. 6kV surge protection on copper Ethernet ports. 5-year warranty. Key Features Built for Equipment Cabinets A fanless enclosure avoids a cooling fan as an additional maintenance point. The specified −40°C to 75°C operating range supports installations beyond a temperature-controlled office. The IP30 rating is not a weatherproof outdoor rating: install the switch inside a suitable enclosure with the required grounding, ventilation and protection from water. Copper Access With Fibre Reach 8 Gigabit copper ports connect local equipment while two SFP slots provide fibre connection choices. Select compatible transceivers, fibre type, wavelength and distance for both ends of the link. The slots operate at Gigabit speed; they are not 10GbE uplinks, and optical modules are purchased separately. Plan the Power System Dual 48–57 V DC terminal-block inputs allow two suitable external power sources to be connected for redundancy. A power supply is not included. Size the supply for the switch and the intended PoE load, allowing appropriate headroom and temperature derating. Installation and protective grounding should follow the manufacturer instructions. Power Devices Over the Network IEEE 802.3af/at support provides up to 30W per powered port within the shared 240W budget. Add the actual endpoint requirements rather than multiplying the maximum port rating by every port. Sufficient DC input power and suitable cabling are required; available power at the device also depends on the Ethernet standard and cable losses. Connect Without Configuration Unmanaged operation lets a straightforward network extension start without switch configuration. Auto MDI/MDIX and auto-negotiation simplify compatible copper connections. Keep the topology free of accidental loops and provide network segmentation upstream when needed; this model does not replace the policy controls of a managed switch. Extend Selected Low-Bandwidth Links Ports 1–4 support an extended-distance mode of up to 250 m at 10 Mbps with suitable Cat5e or Cat6 cabling. This is a reduced-speed mode for appropriate endpoints, not Gigabit performance over 250 m. Cable quality, the connected device and the installation environment affect the usable distance. Summary The DIS-100G-10P is a compact industrial unmanaged switch for dependable Gigabit access with PoE+ power. Specify the DC supply, optics and protective installation alongside the switch so the complete network is ready for its environment. Frequently Asked Questions Is a Power Supply Included?ExpandCollapse No. This offer requires a separate suitable 48–57 V DC DC power supply. The source must cover the intended PoE load as well as the switch, with appropriate installation headroom. Does This Switch Power Cameras or Access Points?ExpandCollapse Yes, compatible IEEE 802.3af/at devices can use the 8 powered copper ports, with up to 30W per port and a 240W shared budget. Can It Be Installed Outdoors?ExpandCollapse Use it inside a suitable protective cabinet. The IP30 enclosure is not weatherproof. The installation must meet the specified temperature and humidity conditions and include appropriate grounding. Are the Fibre Modules Included?ExpandCollapse No. The two Gigabit SFP slots accept separately selected compatible transceivers. Match fibre type, wavelength, distance and environmental rating at both ends. Does Extended Mode Keep Gigabit Speed?ExpandCollapse No. The specified extended mode on ports 1–4 supports up to 250 m at 10 Mbps. Use it only when that reduced data rate is suitable for the endpoint; ordinary Gigabit operation uses normal compliant cable distances. What Does Dual Power Input Mean?ExpandCollapse Two suitable 48–57 V DC supplies can be wired to the terminal inputs so one source can sustain operation if the other fails. The supplies are purchased separately and must be correctly rated for the complete load. 阅读更多