Antigravity A1 Full-Coverage Propeller Guards

More Coverage Around Every Propeller Prepare A1 for a more considered close-range filming setup. Antigravity A1 Full-Coverage Propeller Guards enclose the propellers and fit around the aircraft, adding a physical barrier for low-altitude flight, Follow Me shots and more complex surroundings. The dedicated design works alongside the aircraft’s supported obstacle-avoidance functions. Guards do not remove collision risk, and their effect on weight, endurance and operating limits must be included in your flight plan. Highlights Enclosed Protection Full-coverage design around the A1 propellers. Recommended by the manufacturer for low-altitude and Follow Me shots. Purpose-Matched Fit Designed to fit A1 securely. Designed to remain outside the stitched 360 view when fitted and configured correctly. A Defined Operating Setup Update the app, aircraft and Vision Goggles before use. Plan around the guard-specific speed, height and distance limits. Key Features A Physical Barrier Around the Propellers The upgraded guard design fully encloses the propellers rather than covering only part of their perimeter. It adds a physical barrier during the low-altitude and close-range filming situations for which the manufacturer recommends it. Continue to maintain safe separation from people and obstacles; guards do not make contact with the aircraft or propellers safe. Fit the Set and Configure the System Use the full set on the compatible A1 and follow the current installation guidance. The manufacturer requires the Antigravity app, A1 aircraft and Vision Goggles to be updated to V5.2.0 before use. Check that every guard is secured and follow the app’s applicable guard and stitching settings before take-off. Keep the 360 View Clear The guard shape is designed to sit outside the stitched 360 footage when used as directed. Correct fitting and the applicable capture or stitching settings matter to the result. The manufacturer’s comparison images demonstrate the intended effect; they do not guarantee that every scene, lighting condition or export will be free of an artefact. Plan for the Flight Changes Installing the guards raises take-off weight above 249 g and can reduce endurance. A1 applies a maximum flight speed of 11 m/s with the guards fitted. The stated guard configuration also limits maximum altitude to 50 m and maximum distance to 200 m with any controller. Check the rules for the resulting aircraft weight and configuration before flying. Keep the Configuration Compatible Do not use the Antigravity Cellular Module with these guards. Monitor the transmission signal and aircraft status during flight. In hot conditions, prolonged hovering while recording 8K/30fps can trigger thermal protection and an automatic landing, so avoid extended hovering and plan a suitable landing area. Summary Antigravity A1 Full-Coverage Propeller Guards suit owners preparing A1 for supported low-altitude or Follow Me filming. They combine enclosed propeller coverage with a dedicated fit, provided the aircraft is updated, correctly configured and operated within the guard-specific limits. Frequently Asked Questions Are These the Same as the Earlier A1 Propeller Guards?ExpandCollapse No. This upgraded set encloses the propellers more fully than the earlier open guard design. Its dimensions and flight limits apply specifically to the Full-Coverage set. Do I Need to Update the Aircraft?ExpandCollapse Yes. The current manufacturer instructions require the Antigravity app, A1 aircraft and Vision Goggles to be updated to V5.2.0 before use. Follow any later compatible firmware guidance and complete the required configuration checks. Will the Guards Change Flight Performance?ExpandCollapse Yes. They increase take-off weight above 249 g and may reduce flight time. A1 applies an 11 m/s maximum speed with the guards fitted, and the current instructions state a 50 m maximum altitude and 200 m maximum distance with any controller. Can I Use the Cellular Module with Them?ExpandCollapse No. The manufacturer instructs users not to combine the Antigravity Cellular Module with the Full-Coverage Propeller Guards because this can affect flight performance and safety. Do They Guarantee Collision Protection?ExpandCollapse No. They add a physical barrier around the propellers but do not eliminate collision, injury or equipment-damage risk. Continue to follow the aircraft instructions, maintain safe separation and monitor conditions and the transmission signal. 阅读更多