TP-Link EAP773 BE11000 Ceiling Mount Tri-Band Wi-Fi 7 Access Point
Tri-band Wi-Fi 7 with a 10GbE uplink The TP-Link Omada EAP773 combines 2.4 GHz, 5 GHz and 6 GHz wireless with a 10GbE wired connection for busy workplaces and modern networks. Its BE11000 specification supports advertised signal rates of 574 Mbps, 4320 Mbps and 5760 Mbps across the three bands. Actual throughput depends on the client, network, environment and regional settings. Key features Wi-Fi 7 connectivity: 320 MHz channels on 6 GHz, Multi-Link Operation and 4K-QAM with compatible clients, firmware and regional availability. 10GbE uplink: Connect the access point to suitable multi-gigabit switching so the wired link can support demanding wireless traffic. Omada management: Use supported hardware, software or cloud-based controllers for centralised administration, mesh and roaming features. Flexible deployment: Ceiling or wall mounting with the supplied mounting kit; a DC power adapter is not included. Power and installation The EAP773 supports 12 V / 2.5 A DC or 802.3at PoE+ with the applicable firmware update. Earlier firmware can require 802.3bt PoE++. Check the hardware revision and install the matching regional firmware before relying on PoE+ support. This is a supported capability, rather than a promise that every unit arrives with the same firmware installed. Wireless rate classes differ between regional versions. The BE11000 figures above are the manufacturer's US specification; its EU documentation lists BE9300. Use the correct regional model and permitted wireless settings for the installation. Summary The EAP773 brings tri-band Wi-Fi 7, a 10GbE connection and Omada management together in a slim access point. Plan compatible switching, power and client devices to make effective use of the upgrade. Frequently asked questions Does EAP773 require PoE++?Earlier firmware requires 802.3bt PoE++. TP-Link documents 802.3at PoE+ support after the applicable software update. Use the update intended for the exact regional hardware version. A suitable 12 V / 2.5 A DC supply is another option. Will every client use 6 GHz or the maximum advertised speed?No. Clients must support the relevant bands and Wi-Fi 7 features. Advertised signal rates are theoretical, and 6 GHz availability and channel widths depend on regional rules. Actual throughput varies with the client, interference and wired network. What is needed for centralised management?Use a compatible Omada hardware, software or cloud-based controller. Features and any subscription requirements depend on the management option. Omada mesh, controller-assisted roaming and cloud access require the appropriate controller configuration. Are a power adapter and mounting kit included?The manufacturer lists ceiling/wall mounting hardware and an installation guide with the access point. A DC power adapter is not included. Choose a compatible PoE supply or suitable DC adapter separately.
Pickup available at 3005, Ubi Avenue 3, #01-88
Usually ready in 2-4 Business Day (Excluding Public Holiday)
TP-Link EAP773 BE11000 Ceiling Mount Tri-Band Wi-Fi 7 Access Point
Description
Tri-band Wi-Fi 7 with a 10GbE uplink
The TP-Link Omada EAP773 combines 2.4 GHz, 5 GHz and 6 GHz wireless with a 10GbE wired connection for busy workplaces and modern networks. Its BE11000 specification supports advertised signal rates of 574 Mbps, 4320 Mbps and 5760 Mbps across the three bands. Actual throughput depends on the client, network, environment and regional settings.
Key features
- Wi-Fi 7 connectivity: 320 MHz channels on 6 GHz, Multi-Link Operation and 4K-QAM with compatible clients, firmware and regional availability.
- 10GbE uplink: Connect the access point to suitable multi-gigabit switching so the wired link can support demanding wireless traffic.
- Omada management: Use supported hardware, software or cloud-based controllers for centralised administration, mesh and roaming features.
- Flexible deployment: Ceiling or wall mounting with the supplied mounting kit; a DC power adapter is not included.
Power and installation
The EAP773 supports 12 V / 2.5 A DC or 802.3at PoE+ with the applicable firmware update. Earlier firmware can require 802.3bt PoE++. Check the hardware revision and install the matching regional firmware before relying on PoE+ support. This is a supported capability, rather than a promise that every unit arrives with the same firmware installed.
Wireless rate classes differ between regional versions. The BE11000 figures above are the manufacturer's US specification; its EU documentation lists BE9300. Use the correct regional model and permitted wireless settings for the installation.
Summary
The EAP773 brings tri-band Wi-Fi 7, a 10GbE connection and Omada management together in a slim access point. Plan compatible switching, power and client devices to make effective use of the upgrade.
Frequently asked questions
Does EAP773 require PoE++?
Earlier firmware requires 802.3bt PoE++. TP-Link documents 802.3at PoE+ support after the applicable software update. Use the update intended for the exact regional hardware version. A suitable 12 V / 2.5 A DC supply is another option.
Will every client use 6 GHz or the maximum advertised speed?
No. Clients must support the relevant bands and Wi-Fi 7 features. Advertised signal rates are theoretical, and 6 GHz availability and channel widths depend on regional rules. Actual throughput varies with the client, interference and wired network.
What is needed for centralised management?
Use a compatible Omada hardware, software or cloud-based controller. Features and any subscription requirements depend on the management option. Omada mesh, controller-assisted roaming and cloud access require the appropriate controller configuration.
Are a power adapter and mounting kit included?
The manufacturer lists ceiling/wall mounting hardware and an installation guide with the access point. A DC power adapter is not included. Choose a compatible PoE supply or suitable DC adapter separately.
Specs
TP-Link Omada EAP773 technical specifications
The EAP773 is a tri-band Wi-Fi 7 access point with a 10GbE uplink and Omada management. Wireless and power figures below follow the manufacturer's BE11000 US specification. Regional versions differ, and firmware-dependent capabilities require the update matching the unit's hardware revision.
| Specification | Details |
|---|---|
| Wireless and Client Capacity | |
| Wireless standard and bands | IEEE 802.11a/b/g/n/ac/ax/be; simultaneous 2.4 GHz, 5 GHz and 6 GHz operation. |
| Advertised signal rates | BE11000 US: 574 Mbps at 2.4 GHz, 4320 Mbps at 5 GHz and 5760 Mbps at 6 GHz. The EU version is documented as BE9300 with 2880 Mbps at 5 GHz. These are physical signal rates, not guaranteed application throughput. |
| Radio features | 2×2 MU-MIMO per band, 320 MHz channels on 6 GHz, MLO, 4K-QAM, OFDMA, beamforming and BSS colouring. Compatible clients, firmware and regional channel availability are required. |
| Coverage and connections | Manufacturer coverage estimate up to 140 m² and 380+ concurrent connections. Practical coverage and capacity depend on layout, interference, client traffic and deployment. |
| Wireless networks | Up to 24 SSIDs, eight per band; guest networking, band steering, load balancing, airtime fairness, rate limits and wireless scheduling. |
| Network and Management | |
| Ethernet | 1× 10GbE RJ45 port. |
| Management | Compatible Omada hardware, software or cloud-based controller; Omada app and web management. Mesh, controller-assisted roaming and cloud features require the appropriate controller and configuration. |
| Security | WPA/WPA2/WPA3 Personal and Enterprise, guest portal, access controls, client isolation, VLAN support and rogue access-point detection. |
| Monitoring | SNMP v1/v2c/v3, local/remote system logging, email alerts and LED control. |
| Power and Installation | |
| Power input | 802.3at PoE+ with the applicable firmware update, or 12 V / 2.5 A DC. Earlier firmware can require 802.3bt PoE++. Use firmware matched to the exact regional hardware version. |
| Maximum consumption | US specification: 25.44 W with PoE or 22.57 W with DC. These are access-point consumption figures, not the switch port's rated PoE output. |
| Mounting and package | Ceiling or wall mounting; mounting hardware and installation guide included. DC power adapter not included. |
| Construction and Operating Conditions | |
| Dimensions and net weight | 220 × 220 × 32.5 mm; manufacturer-listed net weight 736 g. Net hardware weight is distinct from packed shipping weight. |
| Enclosure | PC top cover, aluminium-alloy lower shell and stainless-steel mounting bracket. |
| Temperature | Operating 0 °C to 40 °C; storage −40 °C to 70 °C. |
| Humidity | Operating 10–90% and storage 5–90%, non-condensing. |