Insta360 Bike Computer Mount
A Cleaner Cockpit, A New Riding Perspective The Insta360 Bike Computer Mount brings a compatible camera, cycling computer and light into one considered mounting arrangement. It keeps useful equipment together at the front of the bike, with separate versions for integrated and independent handlebars. Aluminium construction, interchangeable computer bases and direct camera connections create a practical setup for recording the route without adding a separate selfie stick. Highlights Separate fittings for integrated and independent handlebars Mounting positions for a compatible camera, bike computer and light Garmin, Wahoo, Bryton and Giant computer bases included 1/4-inch and 3-prong camera connections 500 g maximum attached load; direct camera mounting only Key Features Choose The Fitting For Your Cockpit The Integrated Handlebars version fits vertically aligned dual mounting holes spaced 9–55 mm apart, using 4–5 mm bolts. The Independent Handlebars version fits a split-bar arrangement with 11–39 mm bolt spacing. Measure the bike rather than choosing by appearance, and check bolt engagement and clearance before fitting. Keep The Essential Devices Together The mount offers positions for a compatible camera, cycling computer and light so you can plan one compact arrangement instead of filling the bars with separate brackets. Check the clearance between devices and keep their combined attached weight within the manufacturer’s 500 g limit. Computer Bases For Familiar Brands Garmin, Wahoo, Bryton and Giant computer bases are supplied. Fit the base that matches the cycling computer’s connection, then check that the device locks in correctly. Brand compatibility does not mean every model or unusual mounting arrangement will fit without checking. Direct Camera Mounting Use the appropriate 1/4-inch or 3-prong connection and the camera’s required adapter. A selfie stick must not be attached. For X-series cameras other than X3, Insta360’s installation guide strongly recommends securing the camera to a support plate with a strap. Those parts are not included in these original packages. Prepare The Setup Before The Ride Confirm that the camera, bolts and screws are secure before moving. Insta360 recommends flat-road use at no more than 60 km/h and does not recommend bumpy-road use for this accessory. Set the angle while stationary and follow the fitting instructions rather than modifying the mount. Summary The Insta360 Bike Computer Mount creates a tidy front-of-bike setup for compatible recording and riding equipment. Choose the correct handlebar fitting, attach the camera directly and check the complete load and fastenings before heading out. Frequently Asked Questions Which Handlebar Version Should I Choose?ExpandCollapse Choose Integrated Handlebars for compatible vertically aligned dual mounting holes spaced 9–55 mm apart, with 4–5 mm bolts. Choose Independent Handlebars for a suitable split-bar arrangement with 11–39 mm bolt spacing. Measure the mounting points before ordering. Can I Attach A Selfie Stick?ExpandCollapse No. Insta360 specifies direct camera mounting and says not to attach a selfie stick to the Bike Computer Mount. Use the camera’s appropriate connection or adapter without extending it on a stick. What Is The Maximum Load?ExpandCollapse The manufacturer specifies a maximum attached load of 500 g. Keep the combined devices fitted to the mount within that limit and check that the computer, camera and light have sufficient clearance. Which Bike Computers Are Supported?ExpandCollapse The package includes computer bases for Garmin, Wahoo, Bryton and Giant. Match the supplied base to your computer’s physical connection and check the exact model and locking fit before riding. Is The Support Plate Included?ExpandCollapse No. These Integrated and Independent Handlebar packages do not include a support plate or strap. Insta360’s current installation guide strongly recommends those parts when fitting an X-series camera other than X3, so check the requirements for your camera before setting up.
Pickup available at 3005, Ubi Avenue 3, #01-88
Usually ready in 2-4 Business Day (Excluding Public Holiday)
Insta360 Bike Computer Mount
Description
A Cleaner Cockpit, A New Riding Perspective
The Insta360 Bike Computer Mount brings a compatible camera, cycling computer and light into one considered mounting arrangement. It keeps useful equipment together at the front of the bike, with separate versions for integrated and independent handlebars. Aluminium construction, interchangeable computer bases and direct camera connections create a practical setup for recording the route without adding a separate selfie stick.
Highlights
- Separate fittings for integrated and independent handlebars
- Mounting positions for a compatible camera, bike computer and light
- Garmin, Wahoo, Bryton and Giant computer bases included
- 1/4-inch and 3-prong camera connections
- 500 g maximum attached load; direct camera mounting only
Key Features
Choose The Fitting For Your Cockpit
The Integrated Handlebars version fits vertically aligned dual mounting holes spaced 9–55 mm apart, using 4–5 mm bolts. The Independent Handlebars version fits a split-bar arrangement with 11–39 mm bolt spacing. Measure the bike rather than choosing by appearance, and check bolt engagement and clearance before fitting.
Keep The Essential Devices Together
The mount offers positions for a compatible camera, cycling computer and light so you can plan one compact arrangement instead of filling the bars with separate brackets. Check the clearance between devices and keep their combined attached weight within the manufacturer’s 500 g limit.
Computer Bases For Familiar Brands
Garmin, Wahoo, Bryton and Giant computer bases are supplied. Fit the base that matches the cycling computer’s connection, then check that the device locks in correctly. Brand compatibility does not mean every model or unusual mounting arrangement will fit without checking.
Direct Camera Mounting
Use the appropriate 1/4-inch or 3-prong connection and the camera’s required adapter. A selfie stick must not be attached. For X-series cameras other than X3, Insta360’s installation guide strongly recommends securing the camera to a support plate with a strap. Those parts are not included in these original packages.
Prepare The Setup Before The Ride
Confirm that the camera, bolts and screws are secure before moving. Insta360 recommends flat-road use at no more than 60 km/h and does not recommend bumpy-road use for this accessory. Set the angle while stationary and follow the fitting instructions rather than modifying the mount.
Summary
The Insta360 Bike Computer Mount creates a tidy front-of-bike setup for compatible recording and riding equipment. Choose the correct handlebar fitting, attach the camera directly and check the complete load and fastenings before heading out.
Frequently Asked Questions
Which Handlebar Version Should I Choose?
Choose Integrated Handlebars for compatible vertically aligned dual mounting holes spaced 9–55 mm apart, with 4–5 mm bolts. Choose Independent Handlebars for a suitable split-bar arrangement with 11–39 mm bolt spacing. Measure the mounting points before ordering.
Can I Attach A Selfie Stick?
No. Insta360 specifies direct camera mounting and says not to attach a selfie stick to the Bike Computer Mount. Use the camera’s appropriate connection or adapter without extending it on a stick.
What Is The Maximum Load?
The manufacturer specifies a maximum attached load of 500 g. Keep the combined devices fitted to the mount within that limit and check that the computer, camera and light have sufficient clearance.
Which Bike Computers Are Supported?
The package includes computer bases for Garmin, Wahoo, Bryton and Giant. Match the supplied base to your computer’s physical connection and check the exact model and locking fit before riding.
Is The Support Plate Included?
No. These Integrated and Independent Handlebar packages do not include a support plate or strap. Insta360’s current installation guide strongly recommends those parts when fitting an X-series camera other than X3, so check the requirements for your camera before setting up.
Specs
Insta360 Bike Computer Mount
Choose the version by your bike’s mounting-hole arrangement and measured bolt spacing. The two existing options use different bodies and fitting hardware, while sharing the same 500 g load ceiling and direct-camera requirement. Computer bases, dimensions and included parts are detailed below. Check clearance for the complete camera, computer and light arrangement, tighten the supplied hardware correctly and keep to the manufacturer’s flat-road guidance. Cameras, computers and lights are sold separately.
| Handlebar Fit | |
|---|---|
| Integrated Handlebars | Vertically aligned dual mounting holes, 9–55 mm bolt-centre spacing; 4–5 mm bolt size |
| Independent Handlebars | Suitable split-handlebar arrangement with 11–39 mm bolt-centre spacing |
| Computer Connections | Supplied Garmin, Wahoo, Bryton and Giant computer bases; check exact device fit |
| Camera Connections | 1/4-inch screw and 3-prong mounting interfaces; use the camera’s required adapter |
| X-Series Support Guidance | Current installation guide strongly recommends a support plate and strap for X-series cameras other than X3. These parts are not included in the original packages |
| Load And Road Use | |
| Maximum Attached Load | 500 g |
| Selfie Stick | Not supported; mount the camera directly |
| Recommended Riding | Flat roads at no more than 60 km/h; bumpy-road use is not recommended |
| Before Riding | Check that all camera connections, screws and bolts are locked and clear of bike controls and moving parts |
| Handlebar Bolt Tightening | Manufacturer guide recommends 5 N·m, or the torque specified by the handlebar manufacturer; follow the bike component requirements |
| Construction And Dimensions | |
| Integrated Body | 187 × 39 × 33 mm; manufacturer weight approximately 106 g |
| Independent Body | 115 × 53 × 28.5 mm; manufacturer weight approximately 120 g |
| Materials | 7075-T6 aluminium alloy, plastic and stainless steel |
| Included Parts | |
| Shared Contents | 1 mount body, 1 thumb screw, 4 anti-slip rings, 1 4 mm hex wrench, 1 2 mm hex wrench, Garmin/Wahoo/Bryton/Giant computer bases and 2 computer-mount screws |
| Integrated Hardware | 2 18 mm M5 bolts and 2 18 mm M4 bolts |
| Independent Hardware | 2 40 mm M5 bolts, 2 30 mm M5 bolts, 2 long screw posts and 2 short screw posts |
| Package Distinction | Original handlebar packages; support plate not included |
| Sold Separately | Camera, bike computer, light and any camera-specific adapter |