TP-Link EAP670 AX5400 Ceiling Mount WiFi 6 Access Point

Let Capable Clients Use More of the Wireless Network The TP-Link EAP670 is an AX5400 dual-band Wi-Fi 6 access point for offices and workspaces with demanding 5GHz clients. A four-stream 5GHz radio, 160MHz channel support and a 2.5GbE uplink suit a network designed for faster local transfers and capable client devices. The included DC adapter also gives an alternative where PoE is unavailable. Use it as a standalone access point or bring it into a compatible Omada network for central configuration, monitoring and supported roaming. Highlights Wireless Designed for the Workload 574Mbps on 2.4GHz and 4804Mbps on 5GHz. 2 × 2 on 2.4GHz; 4 × 4 on 5GHz radio configuration with OFDMA and MU-MIMO. A Planned Wired Connection One 2.5GbE RJ45 uplink with PoE+. A DC power adapter is included for a non-PoE installation. Managed as Part of the Network Standalone configuration or compatible Omada controller management. Ceiling and wall mounting with supplied hardware. Key Features Choose Capacity for the Actual Space A four-stream 5GHz radio, 160MHz channel support and a 2.5GbE uplink suit a network designed for faster local transfers and capable client devices. The included DC adapter also gives an alternative where PoE is unavailable. Client radio capability, channel conditions, walls and interference influence the useful speed and coverage. A site survey and a sensible channel plan are more useful than treating an advertised signal rate as an internet-speed guarantee. Match Wireless and Wired Performance The radio rates are 574Mbps on 2.4GHz and 4804Mbps on 5GHz. 160MHz operation can increase link rates for suitable clients where local channel rules and radio conditions permit. It is not available to every client in every location. The 2.5GbE uplink supports more combined wired traffic than a Gigabit connection when the switch and cabling also support it. Keep Configuration Consistent A compatible Omada hardware, software or cloud-based controller can organise supported gateways, switches and access points in one management environment. Set SSIDs, monitor clients and maintain supported firmware across the site. Standalone operation is available when a controller is unnecessary; central cloud access and controller-assisted functions need the appropriate controller and network setup. Make Guest Access Part of the Network Plan SSID-to-VLAN mapping, wireless client isolation, supported WPA security modes and access controls help separate traffic by purpose. A guest network also depends on the gateway, switch configuration and access policy. Up to 16 SSIDs are documented, with eight per band. Keep the design manageable rather than enabling additional SSIDs without a business need. Understand Mesh and Roaming Requirements Omada Mesh can provide a wireless backhaul where a wired connection is impractical. Each access point still needs suitable power, and wireless backhaul uses airtime that could otherwise carry client traffic. Supported assisted roaming needs a compatible controller, firmware and client devices. A client’s own roaming behaviour also affects how it moves between access points. Plan Power and Mounting Before Installation IEEE 802.3at PoE+ or supported 12V DC; adapter included. Current global revision lists 12V / 2A; earlier revisions have different ratings. Use the power rating for the supplied hardware version and reserve enough switch PoE budget for every connected device. Manufacturer enclosure dimensions and adapter specifications have changed between revisions, so confirm the unit label where mounting clearances or a particular power method are important. Summary The EAP670 suits offices and workspaces with demanding 5GHz clients that need centrally managed Wi-Fi 6. Combine the right placement, wired uplink and power source with an appropriate Omada management arrangement for the site. Frequently Asked Questions Is this an internet router?ExpandCollapse No. It is an access point for an existing network. A suitable internet service and gateway/router are required for internet access. Is a power adapter included?ExpandCollapse Yes. The manufacturer lists a DC adapter in the package. Match its rating and plug to the supplied regional hardware version. Do I need an Omada controller?ExpandCollapse Standalone operation is supported. Central management, cloud access, supported mesh and assisted roaming require the appropriate compatible controller and software. Can it deliver the advertised speed to one device?ExpandCollapse Advertised AX5400 rates describe radio capabilities across separate bands. Actual throughput depends on the client, channel width, interference, backhaul and application. The wired uplink is 2.5GbE. Can it be used outdoors?ExpandCollapse This model is an indoor access point. Choose a suitable outdoor-rated model for exposed locations. Does the hardware version matter?ExpandCollapse Yes. Body dimensions, power ratings and supported software features can change between revisions. Check the supplied hardware label and matching documentation for an installation with fixed requirements. 続きを読む