TP-Link EAP603-Outdoor AX1800 Outdoor Wi-Fi 6 Access Point

Bring Business Wi-Fi Beyond the Building The TP-Link EAP603-Outdoor extends a managed wireless network into courtyards, outdoor seating areas and other open spaces. Dual-band AX1800 Wi-Fi 6, two external antennas and a Gigabit Ethernet connection provide a practical foundation for outdoor coverage. Power and data share one Ethernet run, while wall and pole mounting give the installer useful placement options. Use it independently or bring it into a compatible Omada network for central configuration and supported mesh and roaming features. Highlights Outdoor Wireless Coverage Dual-band Wi-Fi 6 with two spatial streams on each band. External omnidirectional antennas and an IP65-rated weatherproof enclosure. A Simple Wired Connection One Gigabit RJ45 uplink with IEEE 802.3at PoE+ support. A 48V passive PoE adapter and mounting kit are included. Part of an Omada Network Standalone management or a compatible Omada controller. Supported mesh and assisted roaming depend on the controller, clients and firmware. Key Features Give Outdoor Areas a Planned Connection Position the access point around the area that people actually use, rather than relying on an indoor router to reach through walls. The two dual-band external antennas support an omnidirectional coverage pattern. Building materials, vegetation, interference and client radios affect the result, so a site survey remains useful for larger or more demanding installations. Use Wi-Fi 6 for Everyday Business Traffic OFDMA and MU-MIMO help compatible clients share airtime, with beamforming, band steering and load-balancing functions available for a planned deployment. Advertised rates reach approximately 574Mbps on 2.4GHz and 1201Mbps on 5GHz. These are wireless signal rates across separate bands, not the guaranteed speed of one device or internet connection. Run Power and Data Together The Gigabit Ethernet port accepts IEEE 802.3at PoE+ or the supported 48V passive PoE supply. The included passive adapter is for dry indoor use only. Keep the supply protected and plan outdoor-rated cabling, grounding and correctly sealed cable entries. The access point does not provide PoE output to another device. Keep Management Consistent Across the Site A supported Omada controller can bring the access point alongside compatible gateways and switches for configuration, monitoring and maintenance. The OC200 and OC300 are hardware-controller options, subject to their supported device lists and installed software. Controller-assisted mesh and roaming require the appropriate network configuration; the access point is not an internet router. Separate Guests from Business Devices Use supported SSIDs, VLAN mapping, access controls and WPA security modes to organise wireless access. A complete guest-network policy also needs matching switch and gateway settings. Up to 16 SSIDs are documented, with eight per band, so the network can be structured without treating every client as part of the same trusted LAN. Install for the Conditions The manufacturer documents IP65 weather protection and 6kV surge/lightning protection at the Ethernet port. These ratings do not make the unit suitable for immersion or replace proper grounding. Wall and pole hardware is supplied. Check the exact regional hardware revision, permitted channels and installation clearances before mounting. Summary The EAP603-Outdoor combines outdoor-ready construction, Wi-Fi 6 and flexible PoE installation in a straightforward Omada access point. It suits a business that wants its outdoor space to work as part of the same managed network, with coverage, power and security planned together. Frequently Asked Questions Is this a router or a wireless bridge kit?ExpandCollapse It is a Wi-Fi access point. Connect it to a suitable LAN and internet gateway. It is not a standalone cellular router or a matched point-to-point bridge kit. Is the PoE adapter included?ExpandCollapse Yes. The manufacturer lists a 48V passive PoE adapter and power cord. The adapter must remain in a dry indoor location. A suitable IEEE 802.3at PoE+ source can also power the access point. Can it operate without an Omada controller?ExpandCollapse Standalone management is supported. A compatible controller is needed for functions such as centralised cloud access, controller-assisted mesh and supported roaming. Can I use an OC200 or OC300?ExpandCollapse These are Omada hardware-controller options. Check that the controller software supports the exact EAP603-Outdoor hardware and firmware, and size the controller for the full network. Will it cover the manufacturer’s maximum distance?ExpandCollapse Published coverage and client figures are reference results, not site guarantees. Placement, obstacles, radio settings, interference and client capability determine usable coverage and throughput. 続きを読む