Synology PSU 250W_3 Internal Power Supply

Restore the power arrangement your system was designed for Synology PSU 250W_3 Internal Power Supply is a genuine replacement power component for compatible Synology storage systems, including RS1219+, RS815+, DS2015xs. It supports a focused repair of the fitted supply while retaining the correct chassis and connection requirements. PSU 250W 24p+12p+8p. This is an internal replacement component rather than an external desktop adapter. Match the exact host, fitted part and any serial-number restriction before ordering. Highlights Power matched to the chassis 250W specified power component PSU 250W 24p+12p+8p Exact host and revision matching Prepared for service Manufacturer dimensions 155 × 81 × 41 mm Part weight 0.73 kg 1 year warranty Key Features A model-specific power replacement The specified 250W component is matched to the systems listed below. Equal power ratings do not establish that mounting points, electrical connections or chassis revisions are interchangeable. The complete host list is the starting point for selection. Select the correct module or set PSU 250W 24p+12p+8p. The internal supply must match the supported chassis and its intended wiring. An external adapter or generic computer PSU should not be selected solely because it has the same wattage. Check hardware and revision details The supported list includes RS1219+, RS815+, DS2015xs. Match the fitted supply label and connector arrangement before ordering; similar-looking power parts can belong to different host generations. Plan the replacement procedure Follow the exact host hardware installation guide and service procedure. Replacement while powered on depends on the supported chassis, its remaining power path and the required service steps; the redundant label alone does not establish that work can proceed live. Keep the repair focused A system that does not start can have several causes. Confirm the power component is the required replacement before purchasing. The spare does not by itself repair storage media, recover files or establish the condition of other hardware. Document the fitted component The manufacturer lists dimensions of 155 × 81 × 41 mm and a part weight of 0.73 kg. Keep the original fault, host serial number and replacement identity together so later maintenance can select the same correct component. Compatible Models RackStation RS1219+, RS815+ DiskStation DS2015xs, DS1817, DS1815+, DS1813+, DS1517, DS1515+, DS1513+ DX Expansion DX513 Summary Synology PSU 250W_3 Internal Power Supply provides a clearly identified genuine replacement for the compatible Synology systems listed below. Match the host and exact part, retain any compatibility condition and follow the equipment guide for a controlled repair. Frequently Asked Questions Will it fit any Synology NAS with the same wattage?ExpandCollapse No. Use the complete Compatible Models section below and match the fitted component and all serial-number restrictions. Wattage alone is insufficient. Is this a module or a complete set?ExpandCollapse This is the specified internal supply, not an external power adapter or NAS chassis. Can it be replaced while the system is running?ExpandCollapse Follow the exact host hardware guide. Hot replacement depends on the supported chassis, its power arrangement and the state of its other supply. Are there revision or serial-number restrictions?ExpandCollapse No additional serial-number restriction is stated in the manufacturer part record. Match the exact host and fitted component before ordering. Does it include the NAS or storage drives?ExpandCollapse No. The offer covers the specified replacement power component. The NAS chassis, drives and installation service are separate. What warranty is included?ExpandCollapse This genuine Synology spare part has a 1 year warranty. Installation and any separate diagnostic or repair service are arranged separately. 続きを読む