QNAP TVR-AI200 16-Channel PoE+ AI Network Video Recorder

A Clearer View of Every Site Bring camera connections, recording and local viewing into one purpose-built system. The TVR-AI200 combines sixteen PoE+ camera ports with a two-drive recorder, HDMI output and built-in AI processing. It suits shops, offices and other smaller sites that need a dedicated surveillance appliance with a straightforward network connection and a plan for keeping important footage elsewhere. Highlights Sixteen Included Recording Channels Dedicated recorder with 16 embedded channels Up to 160Mbps recording throughput under supported settings Power and Data Together 16 PoE/PoE+ ports with a shared 130W budget Separate Gigabit network connection Practical Viewing and Storage HDMI output up to 4K at 30Hz Two SATA drive bays with single-disk or RAID 1 options Key Features Keep the Surveillance Job Focused The recorder runs TVR OS rather than serving as a general-purpose QTS NAS. Its embedded sixteen-channel entitlement provides a defined recording system without separately purchasing those first sixteen channels. The maximum remains sixteen channels; camera bitrate, resolution, compression and simultaneous viewing must remain within its supported limits. Connect Cameras with Less Equipment Sixteen PoE+ ports carry camera data and power through compatible Ethernet cabling. The total PoE budget is 130W, so plan the combined demand of all cameras, including night-time infrared, heaters or other peak loads. The manufacturer lists up to 25.5W output per port, within the shared budget. A camera requiring more power or a different PoE method needs a separate compatible supply. Review What Happened More Efficiently HDMI connects a suitable local display, while supported desktop and mobile clients provide remote viewing. Local playback supports up to four cameras; output resolution and recording-channel counts are different measures. The built-in NPU supports appropriate AI functions such as facial recognition and people counting. Verify camera streams, supported analytics and scene conditions rather than assuming every event or face will be identified. Choose Recording Storage for the Evidence Two fixed SATA bays accept compatible hard drives or SSDs. A supported RAID 1 configuration can improve availability after a drive failure, while single-disk operation provides another supported arrangement. Drives are separate. Size storage using the combined camera bitrate, recording schedule and required retention, leaving working space and an appropriate health-monitoring routine. Keep Important Footage Away from the Recorder Supported QVR Recording Vault integration can back up recordings to a compatible remote QNAP NAS. This can help separate the site recorder from longer-term or centralised storage. Configure the remote target, network capacity and backup schedule deliberately. RAID inside one recorder does not protect footage if the entire unit is stolen, damaged or compromised. Place It Where Service Remains Practical The compact chassis can sit on a desktop or be installed in a suitable rack using the separately sold manufacturer mounting ears. Allow ventilation, power access and space for the rear camera cables. The unit is not supplied with disks or the optional rackmount kit. Keep firmware current and use controlled access and appropriate network segmentation for the cameras and administration. Summary The TVR-AI200 is a focused surveillance appliance for a site with up to sixteen supported camera channels. It combines PoE+ connectivity, local display and recording in one compact unit, with clear power, storage and backup requirements to check before installation. Does It Include the Camera Channels and Hard Drives?ExpandCollapse Sixteen camera-recording channels are embedded. Hard drives, cameras and the optional rackmount kit are not included. Select compatible SATA storage and exact supported camera models separately. Can I Add More than Sixteen Cameras?ExpandCollapse This model’s maximum is sixteen recording channels. The hardware reference uses H.264 at 1920 × 1080 and 30fps, with up to 160Mbps throughput. Higher-quality streams and simultaneous viewing affect the usable workload; do not buy it as an expandable 32-channel recorder. Can All Sixteen Cameras Use Maximum PoE Power?ExpandCollapse No. The ports share a 130W total power budget. The manufacturer lists up to 25.5W output per port, so the sum of the connected cameras’ peak requirements must fit the available budget. Does It Support RAID and Does That Replace a Backup?ExpandCollapse Supported storage modes include single disk and RAID 1. RAID 1 can help maintain access after certain disk failures, but is not an independent backup. Configure a separate remote backup for important recordings. Can I Watch and Back Up Recordings Remotely?ExpandCollapse Supported QVR clients provide network viewing, and QVR Recording Vault can back up recordings to a compatible remote QNAP NAS. Configure the receiving system, network and permissions. Remote access should be secured rather than exposed casually to the internet. Are Rackmount Rails Included?ExpandCollapse No. The manufacturer identifies a separately sold rackmount ear kit for this compact recorder. It does not list a sliding rail entitlement. Confirm the exact mounting kit, cabinet clearance and installation before purchase. 続きを読む