QNAP TS-832PXU 8-Bay 10GbE Rackmount NAS
High-Speed Connections for Shared Business Storage Give shared files and backup traffic a direct route through the network. The QNAP TS-832PXU combines eight SATA drive bays with two 10GbE SFP+ connections and two 2.5GbE RJ45 ports. A quad-core ARM processor and expandable DDR4 memory support its QTS storage environment, while a PCIe slot provides selected upgrade options. Choose the Single or Redundant factory power configuration for an eight-bay 2U platform built around file access, collaboration and recovery planning. Highlights 10GbE Already Built In Two 10GbE SFP+ ports connect to suitable fibre or direct-attach network equipment. Two 2.5GbE RJ45 ports provide an additional multi-gigabit copper connection choice. An Adaptable Eight-Bay Platform Eight SATA bays support compatible 3.5-inch and 2.5-inch drives. Factory 4GB DDR4 memory can be replaced with a compatible module up to 16GB. Storage with Recovery in Mind QTS supports file sharing, snapshots, backup and synchronisation tools. A PCIe Gen2 ×2 slot supports selected expansion cards within its bandwidth limits. Key Features Bring 10GbE into the Storage Network Two 10GbE SFP+ ports are built in, alongside two 2.5GbE RJ45 connections. This provides flexible paths for backup traffic, shared files or suitable network segmentation. SFP+ requires compatible transceivers, fibre leads or DAC cables selected for the connected equipment. Port speed is an interface rating; real transfer performance also depends on drives, RAID, protocol and the client workload. Balance Capacity and Application Needs The AnnapurnaLabs Alpine AL324 is a 64-bit ARM quad-core processor operating at 1.7GHz. Factory memory is a single 4GB DDR4 UDIMM, with one slot supporting a compatible replacement up to 16GB. The platform suits supported storage and container workloads. Software built for x86 processors is not automatically compatible with this ARM system. Choose the Drives for Their Job Eight hot-swappable SATA bays accept compatible hard drives or SATA SSDs. Supported SSD caching and QTS storage features provide options for a planned capacity and performance balance. There are no built-in M.2 slots; M.2 expansion requires a suitable optional PCIe adapter. Check the exact drive model and any expansion card against the compatibility list before ordering. Keep Backup and Collaboration Connected Hybrid Backup Sync can back up or synchronise data to another suitable NAS, server or supported cloud destination. Qsync helps keep selected files and team folders aligned across devices. Snapshots add recovery points for supported volumes. Use these tools alongside an independent backup and a tested recovery procedure; no single feature eliminates every risk to the data. Expand Within the Platform Limits The PCIe Gen2 ×2 slot can accept supported storage, networking or other cards, subject to the physical card limit and software compatibility. Its available bandwidth can limit the performance of an added network card. The two built-in 10GbE SFP+ ports do not need an expansion card, so plan the role of the PCIe slot around a specific requirement. Select the Factory Power Configuration Single uses one 250W supply. The Redundant RP configuration has two 250W supplies and a different rear power arrangement. Their core storage and network hardware match, while weights and power measurements differ. Select the required factory model at purchase; Single is not offered as a chassis that can be upgraded to RP. Plan Supported Camera Recording Separately The model supports QVR recording applications with compatible cameras. Application licences, storage retention and recording workload need to be sized together. Keep camera recording from consuming capacity or network resources required for other services. The specification table separates included channels from software limits and any model-specific calculator estimate. Summary The TS-832PXU gives an eight-bay storage system built-in 10GbE SFP+ and 2.5GbE copper connections without requiring a network expansion card. Match the drives, supported ARM applications, power configuration and backup design to create a practical shared-storage platform for the rack. Does Single have the same network ports as Redundant?ExpandCollapse Yes. Both factory configurations include two 10GbE SFP+ and two 2.5GbE RJ45 ports. Single has one 250W power supply, while Redundant has two 250W supplies. Weight and measured consumption differ, and the Single chassis is not upgradeable to RP. Are SFP+ modules or DAC cables included?ExpandCollapse They are not listed in the standard package. Choose compatible SFP+ modules and fibre, or a suitable DAC cable, for the switch or other connected equipment. The included Ethernet cable is for a compatible RJ45 connection. Does it have built-in M.2 NVMe slots?ExpandCollapse No. M.2 support requires a compatible optional PCIe adapter. The chassis has eight SATA drive bays and one PCIe Gen2 ×2 slot. Check the expansion card dimensions, interface and QTS support before selecting an adapter. Can the 4GB memory be expanded?ExpandCollapse Yes. There is one DDR4 UDIMM slot supporting a compatible module up to 16GB. Expanding memory means replacing the fitted module, rather than adding a second one. Follow the hardware guide and choose a compatible QNAP memory module. Does it run the same applications as an x86 QNAP NAS?ExpandCollapse Application availability depends on the ARM processor, operating system and memory requirements. Do not assume that an x86 application or virtual-machine image can run on this model. Check the specific application before making it part of the deployment. Are drives, rack rails and camera licences included?ExpandCollapse Storage drives and optional rack rails are sold separately. QVR Pro includes eight recording channels; QVR Surveillance provides two built-in channels with six more claimable by registration. Additional licences and the practical recording workload depend on the application and camera configuration. Use the exact compatible accessory links and surveillance specifications when planning the system.
追加商品 (3)
3005, Ubi Avenue 3, #01-88で受け取り可能
通常2〜4日で準備が完了します
QNAP TS-832PXU 8-Bay 10GbE Rackmount NAS
商品説明
High-Speed Connections for Shared Business Storage
Give shared files and backup traffic a direct route through the network. The QNAP TS-832PXU combines eight SATA drive bays with two 10GbE SFP+ connections and two 2.5GbE RJ45 ports. A quad-core ARM processor and expandable DDR4 memory support its QTS storage environment, while a PCIe slot provides selected upgrade options. Choose the Single or Redundant factory power configuration for an eight-bay 2U platform built around file access, collaboration and recovery planning.
Highlights
10GbE Already Built In
- Two 10GbE SFP+ ports connect to suitable fibre or direct-attach network equipment.
- Two 2.5GbE RJ45 ports provide an additional multi-gigabit copper connection choice.
An Adaptable Eight-Bay Platform
- Eight SATA bays support compatible 3.5-inch and 2.5-inch drives.
- Factory 4GB DDR4 memory can be replaced with a compatible module up to 16GB.
Storage with Recovery in Mind
- QTS supports file sharing, snapshots, backup and synchronisation tools.
- A PCIe Gen2 ×2 slot supports selected expansion cards within its bandwidth limits.
Key Features
Bring 10GbE into the Storage Network
Two 10GbE SFP+ ports are built in, alongside two 2.5GbE RJ45 connections. This provides flexible paths for backup traffic, shared files or suitable network segmentation. SFP+ requires compatible transceivers, fibre leads or DAC cables selected for the connected equipment. Port speed is an interface rating; real transfer performance also depends on drives, RAID, protocol and the client workload.
Balance Capacity and Application Needs
The AnnapurnaLabs Alpine AL324 is a 64-bit ARM quad-core processor operating at 1.7GHz. Factory memory is a single 4GB DDR4 UDIMM, with one slot supporting a compatible replacement up to 16GB. The platform suits supported storage and container workloads. Software built for x86 processors is not automatically compatible with this ARM system.
Choose the Drives for Their Job
Eight hot-swappable SATA bays accept compatible hard drives or SATA SSDs. Supported SSD caching and QTS storage features provide options for a planned capacity and performance balance. There are no built-in M.2 slots; M.2 expansion requires a suitable optional PCIe adapter. Check the exact drive model and any expansion card against the compatibility list before ordering.
Keep Backup and Collaboration Connected
Hybrid Backup Sync can back up or synchronise data to another suitable NAS, server or supported cloud destination. Qsync helps keep selected files and team folders aligned across devices. Snapshots add recovery points for supported volumes. Use these tools alongside an independent backup and a tested recovery procedure; no single feature eliminates every risk to the data.
Expand Within the Platform Limits
The PCIe Gen2 ×2 slot can accept supported storage, networking or other cards, subject to the physical card limit and software compatibility. Its available bandwidth can limit the performance of an added network card. The two built-in 10GbE SFP+ ports do not need an expansion card, so plan the role of the PCIe slot around a specific requirement.
Select the Factory Power Configuration
Single uses one 250W supply. The Redundant RP configuration has two 250W supplies and a different rear power arrangement. Their core storage and network hardware match, while weights and power measurements differ. Select the required factory model at purchase; Single is not offered as a chassis that can be upgraded to RP.
Plan Supported Camera Recording Separately
The model supports QVR recording applications with compatible cameras. Application licences, storage retention and recording workload need to be sized together. Keep camera recording from consuming capacity or network resources required for other services. The specification table separates included channels from software limits and any model-specific calculator estimate.
Summary
The TS-832PXU gives an eight-bay storage system built-in 10GbE SFP+ and 2.5GbE copper connections without requiring a network expansion card. Match the drives, supported ARM applications, power configuration and backup design to create a practical shared-storage platform for the rack.
Does Single have the same network ports as Redundant?
Yes. Both factory configurations include two 10GbE SFP+ and two 2.5GbE RJ45 ports. Single has one 250W power supply, while Redundant has two 250W supplies. Weight and measured consumption differ, and the Single chassis is not upgradeable to RP.
Are SFP+ modules or DAC cables included?
They are not listed in the standard package. Choose compatible SFP+ modules and fibre, or a suitable DAC cable, for the switch or other connected equipment. The included Ethernet cable is for a compatible RJ45 connection.
Does it have built-in M.2 NVMe slots?
No. M.2 support requires a compatible optional PCIe adapter. The chassis has eight SATA drive bays and one PCIe Gen2 ×2 slot. Check the expansion card dimensions, interface and QTS support before selecting an adapter.
Can the 4GB memory be expanded?
Yes. There is one DDR4 UDIMM slot supporting a compatible module up to 16GB. Expanding memory means replacing the fitted module, rather than adding a second one. Follow the hardware guide and choose a compatible QNAP memory module.
Does it run the same applications as an x86 QNAP NAS?
Application availability depends on the ARM processor, operating system and memory requirements. Do not assume that an x86 application or virtual-machine image can run on this model. Check the specific application before making it part of the deployment.
Are drives, rack rails and camera licences included?
Storage drives and optional rack rails are sold separately. QVR Pro includes eight recording channels; QVR Surveillance provides two built-in channels with six more claimable by registration. Additional licences and the practical recording workload depend on the application and camera configuration. Use the exact compatible accessory links and surveillance specifications when planning the system.
仕様
QNAP TS-832PXU 8-Bay 10GbE Rackmount NAS
The QNAP TS-832PXU is an eight-bay 2U NAS with a quad-core ARM processor, expandable DDR4 memory, dual 10GbE SFP+ and dual 2.5GbE RJ45 connections. Its SATA bays support compatible hard drives and SSDs, while one PCIe slot offers selected upgrades within Gen2 ×2 bandwidth. Single and Redundant factory power configurations differ in their supplies, weights and measured consumption. Drives, rack rails and SFP+ connection accessories are separate.
| Specification | Details |
|---|---|
| Processing and Memory | |
| Processor | AnnapurnaLabs Alpine AL324; 4 cores at 1.7GHz; 64-bit ARM |
| Factory Memory and Expansion | 4GB DDR4 UDIMM; 1 slot; maximum 16GB (replace the fitted module) |
| Memory Configuration | Use compatible QNAP memory. One UDIMM slot; memory expansion replaces the existing module. |
| Boot Flash | 512MB; dual-boot OS protection |
| Acceleration | 64-bit ARM storage platform; application support depends on architecture |
| Storage and Expansion | |
| Drive Bays | 8 × SATA 6Gbps / 3Gbps; supplied without storage drives |
| Compatible Drive Types | 3.5-inch and 2.5-inch SATA HDDs; 2.5-inch SATA SSDs |
| Drive Servicing | Supported SATA bays are hot-swappable; built-in M.2 slots, where fitted, are not |
| M.2 SSD Slots | Not built in; compatible PCIe adapter required |
| SSD Features | Supported SSD caching; QTS Qtier and over-provisioning subject to configuration. SSDs sold separately. |
| PCIe Expansion | 1 × PCIe Gen2 ×2; its bandwidth can limit an added network card’s performance |
| Card Size Limits | 220 × 68.9 × 18.76 mm |
| External Expansion | Compatible QNAP expansion units require the appropriate host connection, card and supported configuration; sold separately |
| Networking and Connectivity | |
| Built-in Ethernet | 2 × 10GbE SFP+ and 2 × 2.5GbE RJ45 |
| RJ45 Link Rates | 2.5GbE / 1GbE / 100Mbps / 10Mbps |
| Network Features | Supported link aggregation, failover and jumbo frames; depend on network configuration. Wake-on-LAN on the 2.5GbE ports. |
| Higher-Speed Expansion | Built-in 10GbE SFP+; optional cards subject to slot bandwidth and compatibility |
| USB | 4 × USB 3.2 Gen1 (5Gbps) |
| Display Output | No built-in HDMI output |
| SFP+ Accessories | Compatible transceivers, fibre or DAC cables sold separately |
| Storage Software and Data Protection | |
| Operating System | QTS |
| QuTS hero Requirements | Not offered for this ARM configuration |
| RAID under QTS | Single; JBOD; RAID 0 / 1 / 5 / 6 / 10 / 50 / 60, subject to sufficient drives |
| QTS File Sharing | SMB/CIFS, NFS, FTP and supported cross-platform file services |
| Storage Services | Storage pools, shared folders and iSCSI; SSD cache and expansion depend on the selected OS and configuration |
| Protection and Backup | Supported volume/LUN snapshots; Hybrid Backup Sync; Qsync; independent backups recommended |
| Security and Permissions | User and group permissions, supported directory integration, encrypted connections and available security applications |
| Application Planning | Supported ARM applications and containers; do not assume x86 virtual-machine or application compatibility |
| Concurrent CIFS Connections | 700 with maximum installed memory; an application resource limit, not a throughput guarantee |
| Surveillance and Licensing | |
| Supported Recording Applications | QVR Pro and QVR Surveillance on supported QTS releases; application availability depends on firmware and resources |
| QVR Pro Included Channels | 8 recording channels; minimum 4GB RAM |
| QVR Surveillance Included Channels | 2 built-in recording channels; register the NAS to claim 6 additional channels |
| Additional Recording Channels | QVR Pro expansion requires compatible licences and sufficient resources. Confirm the chosen application’s current channel-expansion availability before planning more licensed channels. |
| Maximum Camera Channels | Workload- and application-dependent; no single guaranteed hardware maximum is published for this factory configuration. |
| Recording-Only Sizing Reference | Indicative 44 camera streams for either factory 4GB configuration; an ARM-platform estimate with lower certainty. Manufacturer selector reference using 1080p H.264 at 30fps / 4.096Mbps per camera, without playback or AI; not a guaranteed maximum or included licence count. |
| Recording and Remote Clients | Supported MJPEG / H.264 / H.265 camera streams; desktop and mobile QVR clients depend on the chosen application |
| Sizing Factors | Resolution, bitrate, frame rate, retention, RAID/drives, viewing, analytics and other NAS services affect the workable installation |
| Power and Cooling | |
| Single Power Supply | 1 × 250W; 100–240VAC |
| Redundant Power Supply | 2 × 250W; 100–240VAC |
| Factory Configuration | Single cannot be upgraded to the RP factory configuration; choose the power option at purchase |
| Typical Operating Consumption | Single 56.412 W; Redundant 69.191 W. QNAP tests with the bays populated; actual consumption varies. |
| Disk Standby Consumption | No directly comparable figure published in the selected hardware table |
| Cooling | 2 × 70 mm 12VDC fans |
| Physical and Environmental | |
| Installation | 2U rackmount |
| Dimensions H × W × D | 88.6 × 432 × 511 mm |
| Dimension Notes | Allow additional clearance for rack ears, protruding power-supply components, cabling and ventilation |
| Single Weight | 10.76 kg net; 12.79 kg gross |
| Redundant Weight | 12.47 kg net; 14.61 kg gross |
| Operating Temperature | 0–40°C |
| Storage Temperature | −20–70°C |
| Humidity | 5–95% RH non-condensing; wet-bulb temperature up to 27°C |
| Indicators and Controls | Drive, status and network indicators; power and reset buttons; system warning buzzer |
| Package and Warranty | |
| Included | NAS; 1 Ethernet cable; drive-mounting screws (32 for 3.5-inch and 24 for 2.5-inch drives); quick installation guide |
| Power Cords | Single includes 1; Redundant includes 2 |
| Separate Purchases | Storage drives; optional rack rails, expansion cards, SSD cooling and additional software licences |
| Standard Warranty | 3 years |
| Compatible Accessories | |
| Extended Service | NASCare Extended Warranty with Loaner Unit for 5–8 Bays; optional service, subject to model and service eligibility. |
| Rack Rail Kit | QNAP RAIL-B02; optional, sold separately. Select B02 and verify rack mounting-post depth and hole type. |
| NAS Hard Drive | Seagate IronWolf 6TB ST6000VN001; manufacturer-listed drive with SC60 firmware. Other capacities require their own compatibility check. |











