Insta360 Pet Harness Mount
A Different View Of Every Adventure See familiar walks from a completely different height. The Insta360 Pet Harness Mount positions a compatible camera at the front or on the back of your pet, bringing their view into the story while leaving your hands free. Adjustable straps, a soft base and removable mounting parts help you choose a practical setup for your pet and camera. Highlights Front and back camera positions for different pet perspectives Adjustable neck and chest straps with snap-in buckles Soft base and breathable straps for a considered fit Removable back support for changing camera angles Size-specific fit, camera support and included mounting accessories Key Features Two Perspectives, One Walk A front-mounted camera follows the route from your pet’s level, while the back position can include more of the surroundings. Choose the position that suits the camera and your pet, then check the framing before recording. Cameras shown in the photographs are sold separately. Fit Comes Before Filming Measure both neck and chest circumference before choosing a size. Keep the straps balanced on the left and right, secure loose ends and make the harness snug without causing discomfort. The weight guide is a reference rather than a substitute for measurements; remove the harness if your pet appears uncomfortable. Mounts That Match The Camera The S and M options supplied here include the GO 3/GO 3S Vertical and Horizontal Action Mounts. The L harness supports additional Insta360 camera families through its 3-prong mounting system. Camera adapters and permitted mounting positions differ, so use the compatibility details in Specs rather than assuming every size supports every camera. A Clearer Back Perspective The removable support changes the camera’s position for a wider view. On the L harness, X-series cameras must use the Back 3-Prong Base with the Anti-Tilt Accessory; they must not be attached to the extension support rod. Remove an unused back support to reduce the load on your pet. Designed To Be Looked After Keep the mounting parts clean and inspect the buckles before each outing. Hand-wash S and M separately in cold water or neutral detergent. Wipe the L harness with a damp towel instead of soaking it. Let either version dry in a cool, ventilated place; do not machine-wash, bleach or wring it. Summary The Insta360 Pet Harness Mount adds an engaging pet perspective to everyday filming. Select the correct fit, match the camera to the size-specific mounting system and keep your pet’s comfort at the centre of the setup. Frequently Asked Questions How Do I Choose The Correct Harness Size?ExpandCollapse Measure your pet’s neck and chest, then compare both measurements with the size guide in Specs. The suggested pet weights are only references. A secure, comfortable fit matters more than selecting a size by breed or weight alone. Do All Sizes Support The Same Cameras?ExpandCollapse No. The S and M options include mounts for GO 3 and GO 3S; GO and GO 2 need a suitable 2-prong adapter. The L harness supports Ace, X, GO and ONE RS families with the correct mounts. Follow the size-specific restrictions before attaching a camera. Can An X-Series Camera Go On The Raised Back Support?ExpandCollapse Not on the L harness extension support rod. Use the L Back 3-Prong Base and the required Anti-Tilt Accessory for an X-series camera. Insta360 also recommends GO or Ace cameras for the collar perspective, rather than an X-series camera. Is The Camera Or A Dog Lead Included?ExpandCollapse No. The selected harness and the mounting parts listed in Specs are included. Cameras and dog leads are sold separately. The L harness has a lead attachment; hold your dog’s lead during installation and removal. Can I Wash The Harness?ExpandCollapse S and M can be hand-washed separately in cold water with a neutral detergent. Clean the L harness using a damp towel and avoid soaking it. Do not machine-wash, bleach or wring either version, and allow it to dry away from direct sun.
3005, Ubi Avenue 3, #01-88で受け取り可能
通常2〜4日で準備が完了します
Insta360 Pet Harness Mount
商品説明
A Different View Of Every Adventure
See familiar walks from a completely different height. The Insta360 Pet Harness Mount positions a compatible camera at the front or on the back of your pet, bringing their view into the story while leaving your hands free. Adjustable straps, a soft base and removable mounting parts help you choose a practical setup for your pet and camera.
Highlights
- Front and back camera positions for different pet perspectives
- Adjustable neck and chest straps with snap-in buckles
- Soft base and breathable straps for a considered fit
- Removable back support for changing camera angles
- Size-specific fit, camera support and included mounting accessories
Key Features
Two Perspectives, One Walk
A front-mounted camera follows the route from your pet’s level, while the back position can include more of the surroundings. Choose the position that suits the camera and your pet, then check the framing before recording. Cameras shown in the photographs are sold separately.
Fit Comes Before Filming
Measure both neck and chest circumference before choosing a size. Keep the straps balanced on the left and right, secure loose ends and make the harness snug without causing discomfort. The weight guide is a reference rather than a substitute for measurements; remove the harness if your pet appears uncomfortable.
Mounts That Match The Camera
The S and M options supplied here include the GO 3/GO 3S Vertical and Horizontal Action Mounts. The L harness supports additional Insta360 camera families through its 3-prong mounting system. Camera adapters and permitted mounting positions differ, so use the compatibility details in Specs rather than assuming every size supports every camera.
A Clearer Back Perspective
The removable support changes the camera’s position for a wider view. On the L harness, X-series cameras must use the Back 3-Prong Base with the Anti-Tilt Accessory; they must not be attached to the extension support rod. Remove an unused back support to reduce the load on your pet.
Designed To Be Looked After
Keep the mounting parts clean and inspect the buckles before each outing. Hand-wash S and M separately in cold water or neutral detergent. Wipe the L harness with a damp towel instead of soaking it. Let either version dry in a cool, ventilated place; do not machine-wash, bleach or wring it.
Summary
The Insta360 Pet Harness Mount adds an engaging pet perspective to everyday filming. Select the correct fit, match the camera to the size-specific mounting system and keep your pet’s comfort at the centre of the setup.
Frequently Asked Questions
How Do I Choose The Correct Harness Size?
Measure your pet’s neck and chest, then compare both measurements with the size guide in Specs. The suggested pet weights are only references. A secure, comfortable fit matters more than selecting a size by breed or weight alone.
Do All Sizes Support The Same Cameras?
No. The S and M options include mounts for GO 3 and GO 3S; GO and GO 2 need a suitable 2-prong adapter. The L harness supports Ace, X, GO and ONE RS families with the correct mounts. Follow the size-specific restrictions before attaching a camera.
Can An X-Series Camera Go On The Raised Back Support?
Not on the L harness extension support rod. Use the L Back 3-Prong Base and the required Anti-Tilt Accessory for an X-series camera. Insta360 also recommends GO or Ace cameras for the collar perspective, rather than an X-series camera.
Is The Camera Or A Dog Lead Included?
No. The selected harness and the mounting parts listed in Specs are included. Cameras and dog leads are sold separately. The L harness has a lead attachment; hold your dog’s lead during installation and removal.
Can I Wash The Harness?
S and M can be hand-washed separately in cold water with a neutral detergent. Clean the L harness using a damp towel and avoid soaking it. Do not machine-wash, bleach or wring either version, and allow it to dry away from direct sun.
仕様
Insta360 Pet Harness Mount
Insta360 Pet Harness Mount provides front and back camera mounting positions with size-specific fit and hardware. Choose the size from both neck and chest measurements, using pet weight only as a reference. Camera compatibility, supplied adapters and cleaning instructions differ between the smaller harnesses and the Large version. The table separates those requirements so you can check the fit, camera support and included parts before mounting. A camera and dog lead are supplied separately.
| Fit And Size | |
|---|---|
| Small Fit | Neck 23–36 cm; chest 28–48 cm; pet weight reference 1.5–6 kg |
| Medium Fit | Neck 28–54 cm; chest 38–62 cm; pet weight reference 5–20 kg |
| Large Fit | Neck 49–69 cm; chest 58–100 cm; dog weight reference 18–35 kg |
| Adjustment | Adjustable neck and belly straps; snap-in buckles; strap ends tuck into elastic bands |
| Camera And Mounting | |
| S And M Cameras | GO 3 and GO 3S using the included Vertical and Horizontal Action Mounts; GO and GO 2 require a suitable 2-prong adapter, sold separately |
| L Cameras | Compatible Insta360 Ace, X, GO and ONE RS families; use the correct camera mount or adapter |
| Front Position | Collar/front 3-prong mounting point. For L, GO and Ace cameras are recommended for this position; X-series cameras are not recommended |
| Back Position | Back 3-Prong Base or removable extension support, subject to camera compatibility |
| L X-Series Restriction | Use the Back 3-Prong Base with the Anti-Tilt Accessory. Do not use an X-series camera on the extension support rod |
| GO Framing | GO 3S records 16:9 when mounted horizontally and 9:16 vertically. GO 3 aspect ratio is set in the camera settings |
| Construction | |
| S Dimensions And Weight | 155.8 × 139.5 × 55.7 mm; 141.5 g |
| M Dimensions And Weight | 198.3 × 163.2 × 55.7 mm; 157 g |
| L Dimensions And Weight | With Back 3-Prong Base 298 × 296 × 60 mm; with extension support 298 × 296 × 81 mm; 310 g |
| Materials | S/M plastic, TPU, stainless steel and nylon; L nylon, plastic and metal |
| Included And Care | |
| S And M Contents | 1 harness, 1 Back 3-Prong Base, 1 extension support rod base, 1 Vertical Action Mount, 1 Horizontal Action Mount and 2 thumb screws |
| L Contents | 1 harness, 1 Back 3-Prong Base, 1 extension support rod base, 1 1/4-inch to 2-prong adapter, 4 anti-slip rings, 2 thumb screws, 1 hex wrench and 1 Anti-Tilt Accessory |
| Sold Separately | Camera and dog lead. L GO 3/GO 3S Vertical and Horizontal Action Mount Set, and other required camera mounts, are sold separately |
| Cleaning | S/M hand-wash separately in cold water or neutral detergent; L wipe with a damp towel without soaking. No machine-washing, bleach, wringing or drying in direct sun |
| Pet Comfort | Check fit and camera security before use; remove immediately if your pet shows discomfort or unusual behaviour |