Insta360 Ace Pro 2 Dive Case

Take A Clearer View Below The Surface Prepare your Ace Pro 2 for the scenes beneath the waterline. This dedicated Dive Case provides a 60m waterproof enclosure, a coated glass optical window and mounting options for horizontal or vertical compositions. A sliding buckle lock and supplied anti-fog inserts support a practical diving setup. It is designed specifically for the Ace Pro 2 square-lens configuration, so check your camera before choosing this housing. Highlights For Insta360 Ace Pro 2 with the square lens only Waterproof to 60m when correctly fitted and sealed Coated glass lens helps minimise reflections and repel water Built-in horizontal and vertical two-prong mounting structure Includes anti-fog inserts, mounting hardware and protective pouch Key Features A Dedicated Housing For Deeper Filming The Dive Case extends the supported underwater setup to 60m when correctly assembled and sealed. Its fit is specific to Ace Pro 2 with the square lens; it is not a universal Ace Series case or a housing for the round-lens configuration. Update the camera firmware, remove the Wind Guard and silicone Lens Guard ring as instructed, and keep the camera dry during installation. A Coated Glass Window For The Underwater View The optical window uses coated glass designed to reduce reflection and repel water. Keeping that surface clean helps preserve the image you are trying to capture. The enclosure protects the camera during the intended underwater use, while the supplied anti-fog inserts help manage condensation inside. Fit the inserts in their designated positions without obstructing the sealing surfaces. Choose A Mounting Orientation To Suit The Shot The built-in vertical-horizontal two-prong structure provides more than one mounting orientation for compatible accessories. Supplied anti-slip rings help stabilise the prong connections, while the 1/4-inch adapter and thumb screw support the included mounting arrangement. Choose underwater-suitable supporting equipment separately and check each connection before use; the camera, grip and selfie stick are not part of this package. Check The Seal Before The Camera Goes In The sliding buckle mechanism closes with a positive latch, but inspection remains important. Before each use, test the empty, closed case for leaks according to the manufacturer’s guide, including operating the buttons underwater. Dry it fully afterwards and inspect the interior. Only install the camera once the case, seals and camera are clean and dry. Keep The Camera Controls Ready For Water Align the camera buttons with the case controls and lock the touchscreen before entering the water to prevent unwanted touches. Check that the case is fully closed and that no sand, dust or other material is caught in its seal. The enclosure is not shock-resistant, so avoid hard impacts and follow the manufacturer’s water-entry and handling instructions. Summary This case is a focused underwater accessory for the square-lens Ace Pro 2. Its 60m depth rating, coated glass window and flexible mounting structure support planned dives, with anti-fog preparation, an empty-case leak test and a carefully checked seal forming part of every setup. Frequently Asked Questions Does This Fit The Round-Lens Ace Pro 2?ExpandCollapse No. The current manufacturer page specifies that this case works only with the square lens. It is also not interchangeable with the Ace or Ace Pro Dive Case. Check your camera’s lens configuration before ordering. How Deep Can I Use The Case?ExpandCollapse The manufacturer rates the correctly assembled case with the compatible camera for depths up to 60m. Follow the complete installation and sealing instructions, and test the empty closed case for leaks before each use. Must I Remove Anything Before Installing The Camera?ExpandCollapse Follow the guide to remove the Wind Guard and the silicone Lens Guard ring. Keep the camera and case dry, use the specified anti-fog inserts, align the buttons and lock the touchscreen before entering the water. Can I Mount It For Horizontal Or Vertical Shooting?ExpandCollapse Yes. The case has built-in horizontal and vertical two-prong mounting options. Fit the supplied anti-slip rings before connecting compatible accessories and check that the connection is secure. Grips, selfie sticks and the camera are sold separately. What Comes In The Box?ExpandCollapse The package contains one Dive Case, one protective pouch, eight anti-fog inserts, four anti-slip rings, one 1/4-inch adapter and one thumb screw. The package does not include an Ace Pro 2 camera or an underwater grip. 続きを読む