D-Link DPS-700 589W Redundant Power Supply
A Second Power Path for Supported Network Switches The DPS-700 is a 589W redundant power supply for supported D-Link switches. It provides an external power path to help the connected switch continue operating if its internal supply fails. On supported PoE switches, the DPS-700 can also add 370W to the available PoE budget. Its 1U rackmount format keeps the installation organised. This is a mains-powered redundant supply rather than a battery UPS. Highlights Power Protection 589W rated redundant supply. Designed for explicitly supported D-Link switches. Automatic monitoring and a separate supply path. Installation 19-inch 1U rackmount unit. 90–264 V AC input, 47–63 Hz. 1 m DC connection cable in the normal offer; verify the required cable for the switch. Planning Can add 370W PoE budget on supported switches. A suitable UPS remains separate for mains-outage protection. 1-year warranty. Key Features Reduce the Impact of an Internal Supply Failure An internal switch power-supply fault can disconnect every endpoint behind that switch. A supported redundant supply provides an additional power path, allowing the power system to respond when the internal supply fails. The switch and external supply must be a manufacturer-approved combination. Match the Supply to the Exact Switch The DPS-700 is intended for specific supported D-Link switch models and hardware revisions. Match the power requirements, RPS connector and required cable before installation. A similar connector or the same brand name alone is not enough to establish compatibility. Plan the Available Power On supported PoE switches the supply can add 370W to the PoE budget. This increase depends on the host model and supported power arrangement; it is not a universal 589W endpoint budget. Check the combined load and the host’s failover behaviour when either source is lost. Keep the Rack Organised A 19-inch 1U format fits a conventional network rack. Allow the required ventilation, cable clearance and access to the power connections. Use suitable rack hardware and follow the installation instructions for the actual supplied revision. Specify the Correct Connection The normal offer includes a 1 m DC cable. Some supported switch families require a different cable, so confirm the exact host and cable arrangement before ordering. Do not assume that every supported switch uses the same lead or that an optional extension is included. Separate Redundancy From Battery Backup This supply depends on AC mains power and does not contain a battery. It helps address an internal supply fault but does not keep the network running through a loss of all AC sources. Use a suitably sized UPS and a tested power design where mains-outage continuity is required. Summary The DPS-700 adds a planned redundant-power path to a supported D-Link switching installation. Confirm the switch revision, required cable and complete power design so redundancy supports the intended network availability. Frequently Asked Questions Is This a Battery UPS?ExpandCollapse No. It is an AC-powered redundant supply without a backup battery. A suitable UPS is separate if you need continuity during a mains outage. Will It Work With Every D-Link Switch?ExpandCollapse No. Compatibility is specific to the switch model, hardware revision and RPS connection. Check the supported combination and required cable before ordering. Does It Increase the PoE Budget?ExpandCollapse On supported PoE switches, DPS-700 can add 370W to the available budget. The actual combined budget and failover behaviour depend on the host model. Is the Connection Cable Included?ExpandCollapse The normal offer includes a 1 m DC connection cable. Some switch families require another cable, purchased separately; confirm the exact host before ordering. How Is It Mounted?ExpandCollapse DPS-700 is a 19-inch 1U rackmount supply. Can It Protect Against Every Network Interruption?ExpandCollapse No. Redundant power addresses a supported power-supply failure scenario. Cabling faults, switch faults, loss of all AC sources and network configuration problems need their own resilience measures.
Pickup available at 3005, Ubi Avenue 3, #01-88
通常2〜4日で準備が完了します
D-Link DPS-700 589W Redundant Power Supply
商品説明
A Second Power Path for Supported Network Switches
The DPS-700 is a 589W redundant power supply for supported D-Link switches. It provides an external power path to help the connected switch continue operating if its internal supply fails.
On supported PoE switches, the DPS-700 can also add 370W to the available PoE budget. Its 1U rackmount format keeps the installation organised. This is a mains-powered redundant supply rather than a battery UPS.
Highlights
Power Protection
- 589W rated redundant supply.
- Designed for explicitly supported D-Link switches.
- Automatic monitoring and a separate supply path.
Installation
- 19-inch 1U rackmount unit.
- 90–264 V AC input, 47–63 Hz.
- 1 m DC connection cable in the normal offer; verify the required cable for the switch.
Planning
- Can add 370W PoE budget on supported switches.
- A suitable UPS remains separate for mains-outage protection.
- 1-year warranty.
Key Features
Reduce the Impact of an Internal Supply Failure
An internal switch power-supply fault can disconnect every endpoint behind that switch. A supported redundant supply provides an additional power path, allowing the power system to respond when the internal supply fails. The switch and external supply must be a manufacturer-approved combination.
Match the Supply to the Exact Switch
The DPS-700 is intended for specific supported D-Link switch models and hardware revisions. Match the power requirements, RPS connector and required cable before installation. A similar connector or the same brand name alone is not enough to establish compatibility.
Plan the Available Power
On supported PoE switches the supply can add 370W to the PoE budget. This increase depends on the host model and supported power arrangement; it is not a universal 589W endpoint budget. Check the combined load and the host’s failover behaviour when either source is lost.
Keep the Rack Organised
A 19-inch 1U format fits a conventional network rack. Allow the required ventilation, cable clearance and access to the power connections. Use suitable rack hardware and follow the installation instructions for the actual supplied revision.
Specify the Correct Connection
The normal offer includes a 1 m DC cable. Some supported switch families require a different cable, so confirm the exact host and cable arrangement before ordering. Do not assume that every supported switch uses the same lead or that an optional extension is included.
Separate Redundancy From Battery Backup
This supply depends on AC mains power and does not contain a battery. It helps address an internal supply fault but does not keep the network running through a loss of all AC sources. Use a suitably sized UPS and a tested power design where mains-outage continuity is required.
Summary
The DPS-700 adds a planned redundant-power path to a supported D-Link switching installation. Confirm the switch revision, required cable and complete power design so redundancy supports the intended network availability.
Frequently Asked Questions
Is This a Battery UPS?
No. It is an AC-powered redundant supply without a backup battery. A suitable UPS is separate if you need continuity during a mains outage.
Will It Work With Every D-Link Switch?
No. Compatibility is specific to the switch model, hardware revision and RPS connection. Check the supported combination and required cable before ordering.
Does It Increase the PoE Budget?
On supported PoE switches, DPS-700 can add 370W to the available budget. The actual combined budget and failover behaviour depend on the host model.
Is the Connection Cable Included?
The normal offer includes a 1 m DC connection cable. Some switch families require another cable, purchased separately; confirm the exact host before ordering.
How Is It Mounted?
DPS-700 is a 19-inch 1U rackmount supply.
Can It Protect Against Every Network Interruption?
No. Redundant power addresses a supported power-supply failure scenario. Cabling faults, switch faults, loss of all AC sources and network configuration problems need their own resilience measures.
仕様
D-Link DPS-700 589W Redundant Power Supply
The DPS-700 is a 589W AC redundant power supply for explicitly supported D-Link switches. It provides a second power path for a compatible host and requires the correct RPS cable and installation arrangement. The 19-inch 1U unit can add 370W to the PoE budget of supported switches. The normal offer includes a 1 m DC cable, although some switch families require a different lead. This supply has no battery and does not replace a UPS.
| Specification | Details |
|---|---|
| Power and Compatibility | |
| Rated Output | 589W |
| AC Input | 90–264 V AC, 47–63 Hz |
| Efficiency | 80% |
| Purpose | External redundant power for a manufacturer-approved D-Link switch |
| PoE Expansion | Adds up to 370W on supported hosts; confirm combined budget and failover operation |
| Compatible Examples | DGS-3630-28PC / 52PC with the supported RPS configuration |
| Connection | Correct host-specific RPS cable required; normal offer includes a 1 m DC lead |
| Installation and Environment | |
| Mounting | 19-inch 1U rackmount |
| Operating Temperature | 0°C to 65°C |
| Operating Humidity | 5–95% RH |
| Battery Backup | None; a suitable UPS is separate |
| Warranty | 1 year |
| Supplied and Required Items | |
| Normal Offer | DPS-700 redundant supply and standard 1 m DC connection cable |
| Required Separately | Compatible switch, any host-specific cable and suitable UPS if required |