QNAP TL-R1210TC4-RP 12-Bay USB4 Rackmount JBOD Expansion Enclosure

Expand Rack Storage with a Direct USB4 Connection The TL-R1210TC4-RP adds 12 SATA drive bays to a compatible host through a direct USB4 Type-C connection. It is designed for growing project libraries, backup destinations and larger working datasets, with a link rated up to 40Gbps. Its 2U chassis and dual redundant power modules suit an organised server-room installation. Choose a suitable drive layout and host connection before building the storage pool. Highlights Room to Grow 12 drive bays for compatible SATA hard drives or solid-state drives. Diskless enclosure, so drive selection can match the workload. A Faster Direct Link One USB4 Type-C host interface rated up to 40Gbps. Direct connection using the supplied USB4 cable, without a hub or dock. Practical Deployment 2U rackmount design with dual 250W redundant power modules. Host-based power management and selectable fan modes. Key Features Expand Storage without Replacing the Main System Connect the enclosure to an approved host and create a separate storage area for growing files or backups. On supported QNAP NAS systems, Storage & Snapshots manages the enclosure's drives and independent storage pool. This pool cannot be merged into the NAS's internal pool, and system applications remain on the NAS. USB4 Is More than a Type-C Connector A USB-C socket alone does not establish compatibility. Use a verified USB4 or supported Thunderbolt 4 connection; USB 3 and earlier ports are unsupported. Many listed NAS models require the optional QXP-40G2UC PCIe host card and, on some models, a minimum BIOS version. The host, drives, RAID layout and cable determine real transfer performance. Connect directly and use a suitable cable no longer than 1M as recommended by QNAP. Plan the Drives and RAID Together The bays accept supported 3.5-inch SATA HDDs and 2.5-inch SATA SSDs. Keep HDDs and SSDs in separate RAID groups. RAID is managed by the connected NAS or host software; this is a JBOD expansion enclosure rather than a standalone network NAS or a hardware RAID controller. Maintain an independent backup of important data. Match the Host and Software Supported QNAP deployment requires QTS 5.2.x or later, or QuTS hero 5.2.8 or later. For direct computer use, QNAP lists Windows 11 or later and Ubuntu 22.04 or later with suitable host hardware. Follow the installation guide's power-on and shutdown sequence. Existing enclosure migration is restricted to supported TL USB series JBOD paths; do not assume another enclosure or operating system can adopt the disks unchanged. Build a Serviceable Rack Installation The optional RAIL-B02 kit supports installation in a suitable 19-inch ANSI/EIA-RS-310-D rack. Check the rack dimensions and allow clearance for connections and the protruding power supplies. Dual power modules reduce exposure to a single supply fault, while the connected host remains responsible for the storage services. Compatible Models Supported QNAP hosts include the following models. Match the exact NAS configuration, available PCIe slot, required host card, BIOS and operating-system version before ordering. These models support up to two of this enclosure under QNAP's compatibility matrix; the correct connection is required for each unit. TS-1273AU-RP · TS-1673AU-RP · TS-873A · TS-673A · TS-473A · TS-262 · TS-462 · TS-264 TS-464 · TS-664 · TS-464U-RP · TS-464U · TS-1264U-RP · TS-864eU-RP · TS-864eU · TS-873AeU-RP TVS-h474 · TVS-h674 · TVS-h874 · TVS-h874X · TVS-h674T · TVS-h874T · TS-1655 · TS-855eU TS-855eU-RP · TS-855X · TS-h1655XeU-RP · TS-h1065eU · TS-h1065eU-RP · TS-h665U · TS-h665U-RP · TS-h1465U-RP TS-h1073BXeU · TS-h1073BXeU-RP Summary The TL-R1210TC4-RP is a direct-attached expansion option for buyers who have a compatible USB4 host and want more drive bays without changing their primary storage platform. Choose it for rack-based backup and capacity expansion where redundant power and a supported rail installation matter. Drives, host cards and any required mounting accessories are selected separately. Frequently Asked Questions Is this a standalone NAS?ExpandCollapse No. It connects to a supported NAS or computer. It does not provide independent Ethernet file sharing or run NAS applications on its own. Can I connect it to any USB-C port?ExpandCollapse No. Use a verified USB4 or supported Thunderbolt 4 host connection. USB 3 and earlier interfaces are unsupported, even where the connector is Type-C. Connect directly without a hub or docking station. Does my QNAP NAS need an expansion card?ExpandCollapse Many supported models require the optional QXP-40G2UC PCIe card, and some require a minimum BIOS version. Confirm the exact NAS model, free slot, card support and operating system before purchase. Can I add its disks to the existing internal NAS pool?ExpandCollapse No. QNAP treats this enclosure as an independent storage pool or external disk area. It cannot be merged with the internal NAS pool; NAS applications remain on the host. Are drives and rails included?ExpandCollapse Drives are not included. RAIL-B02 rails and any required QXP-40G2UC host card are optional, separate purchases. A USB4 Type-C cable and drive-mounting screws are supplied. Does it add surveillance camera licences?ExpandCollapse No. It provides drive capacity to a compatible host. Camera licences, supported recording channels, surveillance applications and performance limits belong to the NAS or recording system, not the enclosure. Baca selengkapnya