Insta360 Third-Person Bike Tail Mount
Put the Ride in the Frame Bring the rider, bicycle and road into the same story. Insta360 Third-Person Bike Tail Mount positions a compatible camera behind the saddle for a following perspective that is difficult to achieve from the handlebars. Its seat-post clamp and adjustable mounting angle let you prepare the viewpoint before setting off, while the Invisible Selfie Stick supports the camera behind the bike. Designed for flat-road cycling, it is a deliberate mounting setup for riders who want their footage to show more of the journey. Highlights Seat-post mounting for a third-person cycling perspective. Fits round seat posts with a diameter of 25–32 mm. Mounting angle adjusts through ±90° to suit the bicycle layout. Supplied with a 70 cm Invisible Selfie Stick; use only this supplied stick. Supports the specified Insta360 360 cameras, including X4 Air. For flat roads within the manufacturer’s riding and weather limits. Key Features See the Rider and the Road Together A camera positioned behind the saddle can capture your position on the bicycle as well as the route around you. With a compatible 360 camera, you can choose a composition from the recorded view afterwards. Align the Invisible Selfie Stick with the camera as instructed to help keep the support out of the stitched image. Set the Viewpoint Before the Ride The clamp attaches to a suitable seat post, while the mounting body can tilt up or down through its adjustment range. Choose a position that clears the saddle, bicycle frame and rear wheel, then tighten the fitting and check every connection. An unobstructed mounting position matters more than simply reaching a particular angle. A Defined Fit for the Bicycle The manufacturer specifies a seat-post diameter of 25–32 mm. Check both the diameter and the available mounting area before ordering, particularly with unusual seat-post shapes or a crowded saddle area. Do not assume that a mount suitable for a round post will fit an aero-profile or other non-standard design. Prepare for Road Conditions Use the mount for flat-road cycling and keep within the recommended 60 km/h limit. Avoid mountain roads and strong winds. The camera, stick and clamp should be fitted exactly as instructed, with sufficient clearance for the wheel throughout the ride. Remove the camera promptly after use and store it securely. Match the Camera to the Mount The current installation guide identifies X2, X3, X4, X4 Air and X5 as compatible models. Use the intended Insta360 mounting arrangement and check the latest instructions before fitting a different camera. This is a mounting accessory; the camera and bicycle are supplied separately. Summary Choose this rear-mounted setup when the rider belongs in the shot. Confirm the seat-post dimensions, fit a supported camera and check the clamp, angle and wheel clearance before every ride. The result is a considered following viewpoint for suitable road-cycling conditions. Frequently Asked Questions Will It Fit My Bicycle?ExpandCollapse The clamp is specified for seat-post diameters of 25–32 mm. Check the post shape, available mounting area and clearance around the saddle, frame and rear wheel. Non-standard or aero-shaped posts should not be assumed compatible. Which Cameras Are Supported?ExpandCollapse The mount supports Insta360 X2, X3, X4, X4 Air and X5. Do not assume compatibility with another camera solely because it has a threaded mounting point. Is the Selfie Stick Included?ExpandCollapse The kit includes the tail mount and a 70 cm Invisible Selfie Stick. The manufacturer specifies use only with this supplied stick. The camera and bicycle are not included. Follow the setup instructions and do not substitute a longer stick or unapproved accessories. Can I Use It for Mountain Biking or Fast Riding?ExpandCollapse The manufacturer recommends flat-road cycling within 60 km/h and advises against use on mountain roads or in strong winds. This is not a universal mount for every cycling discipline or road condition. How Do I Adjust and Check the Mount?ExpandCollapse The mounting body adjusts up or down through ±90°. Position it so it does not interfere with the frame or wheel, secure the clamp and camera connections, then check them before riding. Remove the camera after use.
Pengambilan tersedia di 3005, Ubi Avenue 3, #01-88
Biasanya siap dalam 2-4 hari kerja (tidak termasuk hari libur)
Insta360 Third-Person Bike Tail Mount
Deskripsi
Put the Ride in the Frame
Bring the rider, bicycle and road into the same story. Insta360 Third-Person Bike Tail Mount positions a compatible camera behind the saddle for a following perspective that is difficult to achieve from the handlebars. Its seat-post clamp and adjustable mounting angle let you prepare the viewpoint before setting off, while the Invisible Selfie Stick supports the camera behind the bike. Designed for flat-road cycling, it is a deliberate mounting setup for riders who want their footage to show more of the journey.
Highlights
- Seat-post mounting for a third-person cycling perspective.
- Fits round seat posts with a diameter of 25–32 mm.
- Mounting angle adjusts through ±90° to suit the bicycle layout.
- Supplied with a 70 cm Invisible Selfie Stick; use only this supplied stick.
- Supports the specified Insta360 360 cameras, including X4 Air.
- For flat roads within the manufacturer’s riding and weather limits.
Key Features
See the Rider and the Road Together
A camera positioned behind the saddle can capture your position on the bicycle as well as the route around you. With a compatible 360 camera, you can choose a composition from the recorded view afterwards. Align the Invisible Selfie Stick with the camera as instructed to help keep the support out of the stitched image.
Set the Viewpoint Before the Ride
The clamp attaches to a suitable seat post, while the mounting body can tilt up or down through its adjustment range. Choose a position that clears the saddle, bicycle frame and rear wheel, then tighten the fitting and check every connection. An unobstructed mounting position matters more than simply reaching a particular angle.
A Defined Fit for the Bicycle
The manufacturer specifies a seat-post diameter of 25–32 mm. Check both the diameter and the available mounting area before ordering, particularly with unusual seat-post shapes or a crowded saddle area. Do not assume that a mount suitable for a round post will fit an aero-profile or other non-standard design.
Prepare for Road Conditions
Use the mount for flat-road cycling and keep within the recommended 60 km/h limit. Avoid mountain roads and strong winds. The camera, stick and clamp should be fitted exactly as instructed, with sufficient clearance for the wheel throughout the ride. Remove the camera promptly after use and store it securely.
Match the Camera to the Mount
The current installation guide identifies X2, X3, X4, X4 Air and X5 as compatible models. Use the intended Insta360 mounting arrangement and check the latest instructions before fitting a different camera. This is a mounting accessory; the camera and bicycle are supplied separately.
Summary
Choose this rear-mounted setup when the rider belongs in the shot. Confirm the seat-post dimensions, fit a supported camera and check the clamp, angle and wheel clearance before every ride. The result is a considered following viewpoint for suitable road-cycling conditions.
Frequently Asked Questions
Will It Fit My Bicycle?
The clamp is specified for seat-post diameters of 25–32 mm. Check the post shape, available mounting area and clearance around the saddle, frame and rear wheel. Non-standard or aero-shaped posts should not be assumed compatible.
Which Cameras Are Supported?
The mount supports Insta360 X2, X3, X4, X4 Air and X5. Do not assume compatibility with another camera solely because it has a threaded mounting point.
Is the Selfie Stick Included?
The kit includes the tail mount and a 70 cm Invisible Selfie Stick. The manufacturer specifies use only with this supplied stick. The camera and bicycle are not included. Follow the setup instructions and do not substitute a longer stick or unapproved accessories.
Can I Use It for Mountain Biking or Fast Riding?
The manufacturer recommends flat-road cycling within 60 km/h and advises against use on mountain roads or in strong winds. This is not a universal mount for every cycling discipline or road condition.
How Do I Adjust and Check the Mount?
The mounting body adjusts up or down through ±90°. Position it so it does not interfere with the frame or wheel, secure the clamp and camera connections, then check them before riding. Remove the camera after use.
Spesifikasi
Insta360 Third-Person Bike Tail Mount
Insta360 Third-Person Bike Tail Mount positions a supported 360 camera behind the saddle using the supplied Invisible Selfie Stick. The clamp dimensions, angle adjustment and riding limits help you check whether the setup suits your bicycle and route. Leave sufficient clearance around the frame and rear wheel, secure every connection and use only the intended components. The mount is designed for suitable flat-road cycling conditions; camera and bicycle hardware are not included.
| Specification | Details |
|---|---|
| Mounting and Fit | |
| Mounting Position | Suitable bicycle seat post |
| Seat-Post Diameter | 25–32 mm |
| Angle Adjustment | ±90° up or down from the installation reference |
| Clamp Arm Spacing | 60 mm |
| Clearance | Must not interfere with the frame, saddle or rear-wheel rotation |
| Camera and Capture | |
| Supported Cameras | Insta360 X2, X3, X4, X4 Air and X5 in the current installation guide |
| Support Connection | Use only the supplied 70 cm Invisible Selfie Stick between the tail mount and camera |
| Bracket Length | 23 cm |
| 360 Setup | Align the selfie stick parallel with the camera as instructed |
| Riding Conditions | |
| Intended Use | Flat-road cycling |
| Recommended Speed Limit | 60 km/h |
| Avoid | Strong winds and mountain roads |
| After Use | Remove the camera promptly and store it securely |
| Kit Contents | |
| Included | Third-Person Bike Tail Mount and 70 cm Invisible Selfie Stick |
| Supplied Separately | Camera and bicycle |