Insta360 Ski Pole Mount

Bring a Different Perspective to the Descent Place a supported Invisible Selfie Stick alongside a suitable ski pole and prepare a following view of the run. Insta360 Ski Pole Mount connects the two supports through a compact adjustable assembly, letting you keep the camera’s position separate from an awkward handheld selfie-stick grip. Interchangeable clamps accommodate the specified pole diameters, while the locking connection allows the camera angle and stick position to be set before skiing. Highlights Connects a supported Invisible Selfie Stick to a ski pole. Fits the specified 14–22 mm ski-pole diameters. Interchangeable pole clamps and two selfie-stick clamps supplied. Locking adjustment and twist-off stick connection. Standard mount package; selfie stick and camera sold separately. Key Features Prepare a Third-Person Skiing View With a compatible camera and Invisible Selfie Stick fitted, the mount positions the camera away from the pole for a broader view of the skier and surroundings. Plan the angle and recording before the descent. Any invisible-stick effect depends on a compatible camera, its lens and the correct alignment; it is not a property that makes every support disappear from every shot. Keep the Setup Close to the Pole The mount’s centre-of-gravity design is intended to keep the ski-pole arrangement balanced. Install it firmly just below the hand’s natural grip position as instructed, then check the clearance around the pole and equipment. Camera and stick weight still affect handling, so practise with the complete setup before using it on a run. Select the Right Pole Clamp The package supplies pole clamps for 14, 16, 18, 20 and 22 mm diameters. Measure the relevant part of the ski pole and select the best-fitting clamp rather than simply tightening an unsuitable size. Use the supplied wrench for assembly and confirm that the installed clamp is secure before attaching the camera setup. Use a Supported Selfie Stick The supported range includes the manufacturer’s 70 cm, 85 cm and 114 cm Invisible Selfie Sticks and its Action Invisible Selfie Stick. These sticks are separate from this Standard package. Match the stick and camera to the mounting arrangement, and do not assume a longer extension or a different stick is suitable just because it has a familiar thread. Set the Position Before Recording Fit the camera to the selfie stick, pass the stick through its clamp and secure it using the bottom 1/4-inch connection and lock as instructed. Adjust the desired position, then tighten the fittings. When recording is finished, the supported stick can be shortened without removing the entire mount from the pole. Pack Down Without Rebuilding Everything Loosen the lock and rotate the selfie stick to unscrew it when removing the camera setup. The pole-clamp and stick-clamp components provide a practical way to prepare the same supported equipment again. Before each session, check the screw, clamp and lock; transport or earlier use can change the security of an assembly. Summary Insta360 Ski Pole Mount is a focused connection between a suitable ski pole and a supported Invisible Selfie Stick. Choose the correct pole clamp, assemble the camera support and set the angle before starting. This Standard package supplies the mount and fitting parts, allowing you to add a compatible camera and stick that suit the planned setup. Frequently Asked Questions Does This Package Include a Selfie Stick?ExpandCollapse No. This is the Standard Ski Pole Mount package. It includes the mount, hex wrench, two selfie-stick clamps and the specified ski-pole clamps. The camera, ski pole and Invisible Selfie Stick are separate. What Pole Sizes Does It Fit?ExpandCollapse The specified pole-diameter range is 14–22 mm. Included clamps cover 14, 16, 18, 20 and 22 mm. Measure the pole where the mount will be fitted and use the best-fitting clamp. Which Selfie Sticks Are Supported?ExpandCollapse The manufacturer lists its 70 cm, 85 cm and 114 cm Invisible Selfie Sticks and Action Invisible Selfie Stick. Check the selfie stick’s own activity limits as well as the mount fit. Use the correct fitting arrangement and a supported camera; do not assume an unlisted stick or extension is suitable. Where Should I Fit It on the Ski Pole?ExpandCollapse Fit it firmly just below where the hand naturally grips the pole, following the installation diagram. Set the camera angle while stationary and check the screw, stick clamp and lock before skiing. Will the Stick Be Invisible in My Footage?ExpandCollapse That depends on the camera, lens, shooting mode and alignment. A compatible 360 camera and correctly aligned Invisible Selfie Stick can support that effect; the mount alone does not guarantee an invisible support in every recording. Baca selengkapnya