D-Link DEM-QX01Q-SR4 40GBASE-SR4 QSFP+ Multi-Mode Transceiver

A Clear Optical Path for High-Speed Connections The DEM-QX01Q-SR4 adds a 40GBASE-SR4 connection to a compatible QSFP+ host port. It is designed for multimode fibre links in business, aggregation and data-centre networks. An MPO connection and 40 Gbps interface keep the required host and cable choice clear. The specified link reach is OM3 100 m; OM4 150 m. Match the fibre grade, connectors, optical standard and remote module before installation. A physically fitting module alone does not establish host compatibility or an operational link. Highlights Connection Standard 40GBASE-SR4 at 40 Gbps. QSFP+ module with MPO connector. OM3 100 m; OM4 150 m. Link Requirements Multimode fibre; parallel-fibre MPO connection. 850 nm. Compatible host port and supported module revision required. Installation Hot-pluggable design in a supported host. Match both ends and test the completed link. 5-year warranty. Key Features Choose the Correct Host Interface This module uses the QSFP+ form factor and the 40GBASE-SR4 connection standard. Check the host’s exact compatibility list, supported speed and hardware revision. Similar-looking SFP, SFP+, QSFP+ and QSFP28 modules are not automatically interchangeable. Match the Cable to the Link The MPO interface requires multimode cabling. SR4 carries parallel optical lanes, so confirm the MPO fibre count, polarity and end-face arrangement for the complete link. A standard duplex LC lead is not the correct connection. Plan the Required Distance The published reach is OM3 100 m; OM4 150 m. The stated maximum depends on the specified fibre grade and acceptable link loss. Patch panels, connectors and cable condition affect the optical path, so validate the total link rather than relying on distance alone. Make Maintenance More Practical Hot-pluggable construction allows a supported host to accept or release the module without powering down the chassis. Removing the module still interrupts the link that uses it. Schedule the work and provide a tested alternate path where that connection is carrying production traffic. Check the Complete Pair The remote connection must support 40GBASE-SR4 at the intended speed. Match the optical standard and fibre system at both ends, keep connectors clean and protect unused ports with their caps. Do not connect incompatible wavelengths or fibre types simply because the module fits. Install Within the Host Limits The module operating range is 0°C to 70°C. Ensure the host provides the specified power, ventilation and supported firmware. Choose industrial-rated optics separately when an installation needs temperatures outside this commercial operating range. Summary The DEM-QX01Q-SR4 provides a focused 40GBASE-SR4 connection for a compatible QSFP+ host. Specify the correct fibre, connectors and remote optic with the module to build a link that suits the installation. Frequently Asked Questions Will It Work in Any Similar-Looking Slot?ExpandCollapse No. The host must explicitly support this QSFP+ module, connection standard, speed and hardware revision. Check the switch or adapter compatibility list before ordering. Which Cable Does It Need?ExpandCollapse Use multimode fibre with MPO connections. For SR4, confirm MPO fibre count and polarity across the complete path. What Is the Maximum Link Distance?ExpandCollapse OM3 100 m; OM4 150 m. This assumes the specified cable or fibre grade and a link within the permitted loss and installation requirements. Can It Be Fitted Without Turning Off the Switch?ExpandCollapse The module is hot-pluggable in a supported host. Fitting or removing it can still interrupt that link, so plan maintenance around the traffic it carries. Can It Replace a Different Optical Standard?ExpandCollapse Do not assume so. This is a 40GBASE-SR4 optic. Match the remote standard, fibre type and connectors; another module with the same shape may use a different optical system. Are Connection Cables Included?ExpandCollapse No cable is included in this transceiver offer. Select the required cable or fibre patching separately. Protect and clean fibre connectors before commissioning the link. Baca selengkapnya