TP-Link EAP100-Bridge KIT N300 Outdoor Wireless Bridge

Connect nearby spaces without a new cable route The TP-Link EAP100-Bridge KIT connects two locations over a dedicated 2.4GHz wireless link. A matched pair of bridge units is useful for a camera position, small outbuilding or other nearby network point where running a new data cable is inconvenient. Directional antennas, PoE power and an outdoor-ready enclosure support a planned installation, while the Ethernet ports provide a straightforward connection at each end. Highlights A matched point-to-point link Two bridge units with automatic pairing for a simpler initial connection. Up to 500M advertised transmission distance with suitable line of sight. Practical network connections Up to 300Mbps wireless signalling on 2.4GHz. Three 10/100Mbps Ethernet ports per unit; not a Gigabit bridge. Designed for installation IP65-rated enclosure with pole-mounting hardware. Supported PoE or 12V DC power and compatible Omada management. Key Features Reach the network point that cabling cannot easily serve A wireless bridge links a source network to a second location, such as a nearby workshop, gate camera or detached office. Position one unit at each end and align the directional antennas. Both ends still need appropriate power and a local Ethernet connection. The kit transports an existing network connection; it does not create an internet service or replace a broadband subscription. Start with a matched pair The kit contains two bridge units intended to work together. Automatic pairing reduces the initial steps needed to form the link, while supported management tools help check alignment and operation. Complete the installation by changing management credentials, applying the appropriate wireless settings and testing the link under the traffic expected at the site. Understand the wireless and wired limits The radio advertises up to 300Mbps on 2.4GHz, but each Ethernet port is 10/100Mbps. Those figures describe different parts of the connection and must not be added together or treated as guaranteed application throughput. For heavier transfers or Gigabit backhaul, select a bridge with the appropriate wired ports and radio capacity. Interference and the usable path also affect performance. Plan the path before selecting the range The manufacturer’s up-to-500M figure is a reference result, rather than a guaranteed distance through walls, trees or neighbouring buildings. A clear path, suitable mounting height, correct alignment and local radio conditions matter. Consider vegetation growth and moving obstructions as well as the conditions on installation day. Test useful throughput at both ends before relying on the link for important work. Install the outdoor units and protect the power equipment The bridge enclosure is rated IP65 and the manufacturer documents Ethernet surge protection, subject to correct installation. Seal cable entries, use suitable cable and grounding, and follow the supplied mounting guide. Passive PoE adapters supplied with a kit are for protected indoor use, not exposed outdoor mounting. Power options and pack details must match the exact supplied hardware. Bring the link into a manageable network Standalone management is available, with compatible Omada management for supported central monitoring and configuration. The installed hardware and firmware determine the available topology and management functions. This listing is positioned as a point-to-point pair; plan any point-to-multipoint expansion against the exact firmware and controller support rather than assuming unlimited additional endpoints. Summary The EAP100-Bridge KIT is a compact option for a nearby point-to-point network link where modest traffic and Fast Ethernet connections are sufficient. A matched pair, careful alignment and a suitable power arrangement make it useful for extending access without a new cable route. Frequently Asked Questions Does one kit include both ends of the link?ExpandCollapse Yes. The manufacturer’s kit contains two EAP100-Bridge units with mounting hardware. Install one at each end of the planned point-to-point connection. Is this a Gigabit wireless bridge?ExpandCollapse No. Each unit has three 10/100Mbps Ethernet ports. The 300Mbps figure is the advertised wireless signalling rate, not the usable speed of one wired connection. Will it work through buildings or trees over 500M?ExpandCollapse The up-to-500M figure is not an obstruction guarantee. Plan a suitable clear path, mounting height and antenna alignment. Radio interference, vegetation and other obstacles can reduce usable distance and throughput. How are the two bridge units powered?ExpandCollapse Each unit needs a suitable power source. The product supports standard PoE and documented DC/passive-PoE options. Check the exact unit label and supplied kit; passive PoE adapters must be kept in a dry protected location. Do I need an Omada controller to form the link?ExpandCollapse A compatible controller is not required for basic standalone setup. Use supported Omada management when central monitoring or configuration is needed, with firmware and controller versions matched to the bridge hardware. 더 보기