QNAP TS-432X 4-Bay 2.5GbE 10GbE Tower NAS

Shared Storage with a Faster Network Foundation The QNAP TS-432X brings shared folders, backup destinations and supported applications into a 4-bay tower built around a quad-core ARM processor. Its 10GbE SFP+ connection and dual 2.5GbE ports provide a practical route beyond a Gigabit-only network. Start with a sensible drive layout, then plan memory, optional PCIe hardware and separate backups around the work your NAS will actually do. Highlights Network Headroom 1 × 10GbE SFP+ and 2 × 2.5GbE RJ45. Choose compatible fibre modules or a DAC for the SFP+ connection. Storage That Fits the Work 4 SATA bays accept compatible HDDs and 2.5-inch SATA SSDs. Plan storage pools, snapshots and independent backups together. Room for Qualified Upgrades Replaceable memory with a supported 16GB maximum. One PCIe Gen3 ×4 slot for a supported card. Clear Recording Planning Eight free QVR Surveillance channels after registration. Additional recording licences and actual workload limits remain separate. Key Features Put the Right Network Behind Your NAS The TS-432X provides one 10GbE SFP+ connection alongside two 2.5GbE copper Ethernet ports. This gives you different routes for client access and backup traffic. Use suitable switches, transceivers or DACs and client networking. Port trunking depends on the switch and configuration; adding the rated speeds together does not guarantee that speed for one file transfer. Choose a Drive Layout with Recovery in Mind Populate the 4 hot-swappable SATA bays with qualified drives and select an appropriate RAID or storage-pool layout. Compatible SATA SSDs can support suitable flash or caching workloads. RAID can help with certain drive failures, but it does not protect against every deletion, theft or ransomware event. Keep a separate, current backup and test your recovery process. Upgrade the Part That Your Workload Needs 4GB DDR4 SODIMM installed in one occupied slot; up to 16GB by replacing the module. Factory memory is non-ECC; supported ECC memory requires an exact qualified module. The PCIe slot accepts supported network or storage expansion cards. There are no built-in M.2 slots; adding compatible M.2 storage requires a suitable QM2 card, which uses the same expansion slot. Check card clearance, compatibility and thermal requirements before choosing an upgrade. Use QTS for Everyday File and Backup Work QTS provides supported file sharing, permissions, snapshots and applications for the model. Hybrid Backup Sync can organise supported backup and synchronisation to separate destinations. The 64-bit ARM platform has a different application set from x86 models, so verify any business package or container requirement rather than assuming every QNAP application is available. Separate Camera Entitlement from Recording Capacity QVR Surveillance on compatible QTS: 2 included channels plus 6 after required registration, giving 8 free. Additional channels require licences. QVR Pro is separate and has a 16-channel software ceiling on supported ARM models. QTS recording-only planner estimates up to 44 channels with factory 4GB RAM and 4-drive RAID5. Scenario: 1080p H.264, 30fps, 4.096Mb/s per camera, without playback or AI load. This ARM estimate is not a tested or guaranteed maximum; actual capacity varies with drives, firmware and other workloads. Expand Through a Supported Connection Compatible expansion choices include up to 2 TR-002, TR-004 or TR-004U USB RAID units; or 1 TL-D800C or TL-R1200C-RP USB JBOD. Supported SATA JBOD choices are 1 TL-D400S, TL-D800S, TL-D1600S, TL-R400S or TL-R1200S-RP with the appropriate compatible QXP host adapter and cables. These are separate model/connection limits, not an additive total; confirm the complete host and firmware configuration. Confirm the exact host firmware, enclosure, adapter and cabling before purchase. Expansion storage remains dependent on the host and does not itself add camera licences or replace an independent backup. Prepare a Complete Installation The enclosure is supplied without storage drives. Allow ventilation space, use the supplied adapter and arrange appropriate network and backup equipment. Optional NASCare is a separate service for the eligible registered NAS; choose the tier for all physical drive bays rather than the number of drives installed. Summary The TS-432X suits teams that need organised shared storage, a dependable backup destination and a supported path for future upgrades. Match its SATA layout and ARM application support to the work, then size camera licensing, recovery and network equipment separately. This keeps the configuration useful and understandable as the business grows. Frequently Asked Questions Are drives included?ExpandCollapse No. This listing is the 4-bay NAS enclosure. Select compatible SATA hard drives or 2.5-inch SATA SSDs separately and plan the storage layout before installation. Do the 10GbE ports use ordinary Ethernet cables?ExpandCollapse The SFP+ connection needs a compatible optical module and fibre, or a supported DAC. The separate 2.5GbE RJ45 ports use suitable copper Ethernet cabling. Switch, client and drive performance all affect actual throughput. Can I add memory or M.2 SSDs?ExpandCollapse 4GB DDR4 SODIMM installed in one occupied slot; up to 16GB by replacing the module. Factory memory is non-ECC; supported ECC memory requires an exact qualified module. There are no built-in M.2 slots. A qualified QM2 card can add supported M.2 storage through the single PCIe slot, subject to the exact card and drive compatibility. How many surveillance cameras can it record?ExpandCollapse QVR Surveillance on compatible QTS: 2 included channels plus 6 after required registration, giving 8 free. Additional channels require licences. QVR Pro is separate and has a 16-channel software ceiling on supported ARM models. QTS recording-only planner estimates up to 44 channels with factory 4GB RAM and 4-drive RAID5. Scenario: 1080p H.264, 30fps, 4.096Mb/s per camera, without playback or AI load. This ARM estimate is not a tested or guaranteed maximum; actual capacity varies with drives, firmware and other workloads. Which expansion units can I use?ExpandCollapse Compatible expansion choices include up to 2 TR-002, TR-004 or TR-004U USB RAID units; or 1 TL-D800C or TL-R1200C-RP USB JBOD. Supported SATA JBOD choices are 1 TL-D400S, TL-D800S, TL-D1600S, TL-R400S or TL-R1200S-RP with the appropriate compatible QXP host adapter and cables. These are separate model/connection limits, not an additive total; confirm the complete host and firmware configuration. Does RAID replace a backup or security plan?ExpandCollapse No. RAID does not replace a separate backup, access controls, updates or a tested recovery process. A snapshot retained only on the same NAS is also not an independent backup. NASCare covers its agreed service scope and is separate from data recovery and backup software. 더 보기