QNAP QXG-10G1TD Single-Port 10GbE RJ45 PCIe Network Card

Make Faster Shared Storage Part of Your Everyday Network The QXG-10G1TD adds a single 10GbE RJ45 port to a compatible QNAP NAS or workstation. Five supported Ethernet speeds let it work with an existing network while leaving room for a faster connection later. Its compact PCIe design and supplied brackets suit different supported enclosures, making it a practical upgrade for shared project files, backups and other traffic that can outgrow Gigabit Ethernet. Highlights Five Ethernet Speeds 10GbE, 5GbE, 2.5GbE, 1GbE and 100MbE through one RJ45 port. Use appropriate copper cabling and a compatible network endpoint. Compact PCIe Upgrade PCIe 3.0 x2 host interface with Realtek RTL8127AT controller. Low-profile bracket fitted; full-height and QNAP-specific brackets included. Supported NAS and Computer Use QTS 5.2.9 or QuTS hero h5.2.9 or later on supported NAS models. Specified Windows and Ubuntu systems supported with the required drivers. Key Features Move beyond a Gigabit Connection A 10GbE link gives suitable NAS and client systems a wider network path for large shared files, backup traffic and multi-user work. The card also supports lower Ethernet speeds, so it can negotiate an appropriate connection with compatible 5GbE, 2.5GbE, Gigabit or Fast Ethernet equipment. The rest of the storage and network path still determines the speed an application achieves. Keep Familiar Copper Connections The RJ45 connector integrates with suitable twisted-pair cabling rather than requiring an optical transceiver. Cat 6a cabling is the sensible choice for planning a 10GbE link. Confirm the cable length, installation quality, switch port and client adapter together; replacing only the NAS card does not make every part of the network run at 10GbE. Fit the Correct Slot and Bracket The card uses a PCIe 3.0 x2 connection and arrives with a low-profile bracket installed. Full-height and specialised QNAP brackets are also included. Check the NAS compatibility list, available slot lanes, card clearance and bracket before purchase. The card is an internal network upgrade, not a USB adapter or a standalone Ethernet switch. Match Drivers and Software to the Host Supported QNAP systems require QTS 5.2.9 or QuTS hero h5.2.9 or later. QNAP also specifies Windows 11 25H2, Windows Server 2022 or 2025 and Ubuntu 22.04 or 24.04, using the appropriate driver. Keep the card on manufacturer-approved firmware and size the complete host for the intended traffic. Keep the Upgrade Easy to Manage Port indicators assist connection checks, while supported Jumbo Frames can reduce packet-processing overhead in an appropriately configured network. Apply compatible MTU settings across the relevant path and test with the actual clients. Do not enable a larger MTU blindly on an existing network or interpret a link-speed indicator as a measured file-transfer result. Summary QXG-10G1TD is a focused way to add multi-speed copper Ethernet to a supported NAS or computer. It is well suited to a carefully planned 10GbE upgrade where the slot, operating system, cables and clients are all ready to use the additional bandwidth. Which Ethernet Speeds Are Supported?ExpandCollapse The RJ45 port supports 10GbE, 5GbE, 2.5GbE, 1GbE and 100MbE. The negotiated speed depends on the connected equipment and cabling. Can I Install It in Any QNAP NAS?ExpandCollapse No. The exact NAS must appear on the compatibility list and have a suitable free PCIe slot, clearance and bracket. A NAS without PCIe expansion cannot use this internal card. Which NAS Software Version Is Required?ExpandCollapse QNAP specifies QTS 5.2.9 or QuTS hero h5.2.9 or later. Check that the exact NAS can run the required version before ordering. Can a Windows or Linux Computer Use It?ExpandCollapse Supported hosts include Windows 11 25H2, Windows Server 2022 or 2025 and Ubuntu 22.04 or 24.04. Install the correct driver and check the computer's PCIe slot and enclosure fit. Are the Mounting Brackets Included?ExpandCollapse Yes. A low-profile bracket is pre-installed, with full-height and specialised brackets for selected QNAP NAS models also supplied. Choose the bracket appropriate to the host. Will It Guarantee 10Gbps File Transfers?ExpandCollapse No. 10Gbps is the link rate. Drive performance, the NAS or computer, clients, cables, switches and the workload affect actual file-transfer speed. 더 보기