QNAP QSW-M2106R-2S2T 10-Port 2.5GbE and 10GbE Managed Switch

Bring Faster Access and Storage Links Together Give workstations, shared storage and network uplinks the connections they need without making every port the same speed. The QNAP QSW-M2106R-2S2T combines six 2.5GbE copper ports with two 10GbE copper ports and two separate SFP+ connections. Layer 2 management helps organise the traffic, while its half-width enclosure fits a considered rack layout. Highlights A Flexible Ten-Port Layout Six 2.5GbE RJ45 ports serve capable computers and other access devices. Two 10GbE RJ45 ports and two dedicated SFP+ ports connect higher-bandwidth equipment. Control for Shared Networks QSS provides browser-based port monitoring and configuration. VLANs, LACP, QoS, ACLs and RSTP support a planned Layer 2 network. Compact Rack Installation Half-width construction uses equipment space efficiently. An internal AC power supply avoids an external power adapter. Key Features Give Different Devices the Right Connection Use 2.5GbE access ports for capable computers and reserve the 10GbE connections for storage, servers or uplinks. The two 10GbE copper ports also negotiate lower multi-gigabit speeds. The two SFP+ ports remain separate from the RJ45 ports, so using a copper connection does not consume an SFP+ connection. Choose Copper or SFP+ Links RJ45 connections suit compatible copper network equipment, while SFP+ supports suitable optical transceivers or direct attach cables. Confirm the module or cable compatibility at both ends and select cabling for the intended distance. The switch provides Ethernet data connections; it does not supply PoE power to an access point or camera. Keep Workgroups and Traffic Organised QSS brings VLAN configuration, IP/MAC access control and traffic prioritisation into a browser interface. These controls help separate suitable device groups and give important traffic an appropriate priority. They require a coherent network design and do not replace an Internet router, firewall or endpoint security. Plan Capacity and Redundant Paths LACP supports aggregation across compatible devices, while RSTP helps manage redundant paths without leaving an uncontrolled switching loop. Aggregation can increase total capacity across suitable flows; a single file transfer is still subject to the connection, host and application limits. The switch offers 110Gbps switching capacity and 55Gbps non-blocking throughput. See the Network Before Troubleshooting It The QSS dashboard and port statistics make it easier to identify active links and review traffic. LLDP assists with connected-device discovery, and firmware can be maintained through supported online or manual updates. Schedule updates sensibly because restarting a switch interrupts the links it serves. Use Rack Space Deliberately The supplied rackmount kit supports installation of this half-width switch. A two-switch arrangement in one rack unit needs the appropriate optional dual-switch mounting kit. Two controlled fans provide cooling, so leave ventilation clear and plan the installation for the specified indoor operating conditions. Summary The QSW-M2106R-2S2T suits a network that needs practical 2.5GbE access alongside separate 10GbE copper and SFP+ links. Its managed controls and compact rack format make it a useful bridge between everyday devices, faster shared storage and the wider network. Does the QSW-M2106R-2S2T supply PoE power?ExpandCollapse No. This model provides Ethernet data connections without PoE output. A camera or access point that needs PoE requires a suitable separate injector or PoE switch. Are the SFP+ and 10GbE copper ports shared?ExpandCollapse No. There are two dedicated SFP+ ports, two dedicated 10GbE RJ45 ports and six 2.5GbE RJ45 ports. These provide ten data connections in total, plus a separate RJ45 console interface. What equipment do I need for a 10GbE link?ExpandCollapse Both endpoints must support the intended connection. Select suitable copper cabling for RJ45 links, or compatible transceivers and fibre or a suitable direct attach cable for SFP+. Network cables and transceivers are selected separately. Can it separate networks using VLANs?ExpandCollapse Yes. Its Layer 2 feature set includes IEEE 802.1Q VLANs, ACLs, QoS and RSTP. Routing between networks and Internet security still require appropriate network equipment and configuration. Does link aggregation make one transfer faster?ExpandCollapse LACP can combine compatible links to increase aggregate capacity and provide a planned redundant path. It does not automatically multiply the speed of one transfer. Both connected devices and the traffic pattern matter. What is supplied and how can it be mounted?ExpandCollapse The package includes the switch, power cord, rackmount kit and quick installation guide. Installing two compatible half-width switches together in one rack unit requires the optional dual-switch rackmount kit. The switch has a two-year warranty; bundled accessories have one year. 더 보기