Insta360 Motorcycle Kit

Build the View Around the Ride A well-positioned camera starts with the right mounting point. The Insta360 Motorcycle Kit combines a Heavy Duty Clamp for suitable round tubes with two flexible adhesive mounts for supported smooth surfaces. Use the clamp for a handlebar view or prepare an adhesive position for a different perspective, then match the connection to your camera. The current kit brings the mounting pieces and tools together without adding an unwanted selfie stick. Highlights Current standard kit with a Heavy Duty Clamp and two flexible adhesive mounts. Clamp fits suitable round tubes 17–37 mm in diameter. Includes mounting adapters, thumb screws, anti-slip rings and tools. Adhesive mounts require a clean surface and 24-hour wait before camera use. Camera, camera-specific mount and selfie stick are separate. Key Features Choose a Suitable Round Tube The Heavy Duty Clamp is designed for suitable round tubes, such as handlebars or bumpers, within its 17–37 mm diameter range. Its current design removes the ball-joint arrangement of older mounting systems. Use the supplied wrench as instructed on smooth metal and check the mount is secure without rotation or play. Do not attach it to irregular shapes. Prepare a Second Camera Position The two flexible adhesive mounts add an option for compatible smooth surfaces where a clamp is unsuitable. Clean and dry the surface, press the base firmly for 30 seconds and wait at least 24 hours before attaching the camera. A detached adhesive base cannot simply be reused, and adhesive mounts must not be paired with a selfie stick. Keep the Mounting Pieces Together The package includes adapters, thumb screws, anti-slip rings and the specified tools, allowing the appropriate supported connections to be assembled. Camera-specific Quick Release Mounts are separate where required. The kit does not include a camera or selfie stick, so check the full connection and clearances before the first ride. Use the Correct Stick Only Where Permitted For the clamp’s supported selfie-stick arrangement, the manufacturer allows only the Insta360 Action Invisible Selfie Stick, extended to no more than 100 cm. It must connect directly to the clamp’s 1/4-inch screw, without another accessory inserted between them. A stick-mounted setup is for smooth roads only and must follow the complete installation instructions. Respect the Setup’s Limits With the camera mounted directly to the clamp, the manufacturer limits use to 80 km/h on smooth roads or 40 km/h off-road. Those are equipment limits, not permission to exceed local road rules. Keep the camera clear of the rider, controls and other road users, follow the installation guide and recheck every connection before riding. Summary The Motorcycle Kit brings a current Heavy Duty Clamp, two flexible adhesive mounts and the associated adapters and tools into one setup. Choose the mounting method for the surface, camera and conditions, then follow the preparation and operating limits. It provides a foundation for supported filming views while leaving the camera and optional Action Invisible Selfie Stick as separate purchases. Is a Selfie Stick Included?ExpandCollapse No. This is the standard kit with the Heavy Duty Clamp, two flexible adhesive mounts, adapters and tools. The camera and any selfie stick are separate. What Size Tube Can the Clamp Fit?ExpandCollapse The manufacturer specifies suitable round tubes 17–37 mm in diameter. Do not attach it to irregularly shaped objects. On smooth metal, tighten with the supplied wrench as instructed and check for movement before riding. How Long Must I Wait After Sticking an Adhesive Mount?ExpandCollapse Clean and dry the surface, press the mount firmly for 30 seconds, then wait at least 24 hours before attaching the camera. Do not reuse a base that has detached, and do not attach a selfie stick to the adhesive mount. Which Selfie Stick Can Be Used with the Clamp?ExpandCollapse Only the manufacturer’s permitted Action Invisible Selfie Stick arrangement, extended to 100 cm or less and connected directly to the clamp’s 1/4-inch screw. Use that arrangement only on smooth roads and follow the complete installation guide. What Are the Riding Limits?ExpandCollapse For a camera connected directly to the clamp, the manufacturer specifies no more than 80 km/h on smooth roads or 40 km/h off-road. Local road rules and a safe setup still apply. Keep the mount clear of the rider and controls and check all connections before use. 더 보기