Insta360 1/4-inch In-Car Mount Adapter
A Cleaner Camera Position Inside the Car Build an in-car camera setup around a suitable mounting point already in the vehicle. This compact adapter screws into an existing 1/4-inch socket, with a ball head for refining the camera angle and a locking lever that can be repositioned after tightening. Frame a cabin view or a passenger-facing shot without an adhesive base, then secure the complete mounting arrangement before the journey. Highlights Fits an existing suitable 1/4-inch threaded vehicle mounting point. Ball head offers 360-degree rotation and a 90-degree tilt position. Locking lever can be repositioned to reduce its visibility in the frame. Includes a 1/4-inch to 3-Prong Adapter and thumb screw. 64.5g mount; camera-specific Quick Release Mount is separate. Key Features Use a Suitable Built-In Mounting Point The lower 1/4-inch screw fits a designated threaded mounting socket in the vehicle. It offers an alternative to an adhesive base where that compatible socket is already available. Check the mounting point and orientation first: the screws at both ends have the same specification, so their position matters during installation. Adjust the View Before Locking It Loosen the lever to rotate the ball head and refine the shooting direction. The side notch allows a 90-degree tilt for a landscape camera position. Once the view is set, tighten the lever to lock the angle. Check the camera preview and prepare the position while parked, keeping the driver’s view and controls clear. Keep the Lever Out of the Picture After tightening, pull the lever outwards, reposition it and release it. This lets you move the lever to a less visible position without treating it as another camera-angle adjustment. Its appearance in 360 footage depends on the camera and framing, so preview the actual shot rather than assuming every part of the setup disappears. Match the Camera’s Own Mounting Method A compatible camera with a 1/4-inch mounting socket can connect to the upper screw as instructed. Ace-series cameras use the appropriate separate Quick Release Mount with the supplied 1/4-inch to 3-Prong Adapter and thumb screw. GO-series setups also need their supported camera-specific fitting; the adapter is not a substitute for the camera’s mounting base. Check the Whole Connection The package contains the mount, one 1/4-inch to 3-Prong Adapter and one thumb screw. Tighten all knobs and levers and check for wobble before recording. The manufacturer advises against magnetic quick-release arrangements in severe vibration or high-intensity use, and excludes pairing this adapter with a selfie stick or Unicorn Helmet Mount. Summary Insta360 1/4-inch In-Car Mount Adapter provides a compact threaded mounting route with flexible ball-head positioning. Choose it when the vehicle has a suitable designated socket, match the connection to the camera and check the complete setup before use. The included adapter and thumb screw support the prescribed mounting arrangements, with any camera-specific Quick Release Mount supplied separately. Frequently Asked Questions Does It Work in Every Car?ExpandCollapse It needs a suitable existing 1/4-inch threaded mounting socket. It is not a suction cup, adhesive base or universal clamp. Check the designated mounting point and available clearance in your vehicle before ordering. Is a Quick Release Mount Included?ExpandCollapse No. The package contains the In-Car Mount Adapter, one 1/4-inch to 3-Prong Adapter and one thumb screw. A camera-specific Quick Release Mount, where required, is separate. How Can I Change the Camera Angle?ExpandCollapse Loosen the lever to adjust the ball head, then tighten it to lock the position. The head rotates through 360 degrees and can tilt into the side notch for a 90-degree landscape position. Check framing and every connection before use. Can I Add a Selfie Stick?ExpandCollapse No. The manufacturer excludes use with a selfie stick or Unicorn Helmet Mount because the camera could detach. Use a supported camera mounting arrangement directly on the adapter. What Should I Check Before the Journey?ExpandCollapse Set up while parked, keep the driver’s view and controls clear, and confirm that the socket, screws, knobs and levers are secure. Magnetic quick-release accessories are not recommended for severe vibration or high-intensity use.
Pickup available at 3005, Ubi Avenue 3, #01-88
일반적으로 2~4일 후 준비 완료
Insta360 1/4-inch In-Car Mount Adapter
제품 설명
A Cleaner Camera Position Inside the Car
Build an in-car camera setup around a suitable mounting point already in the vehicle. This compact adapter screws into an existing 1/4-inch socket, with a ball head for refining the camera angle and a locking lever that can be repositioned after tightening. Frame a cabin view or a passenger-facing shot without an adhesive base, then secure the complete mounting arrangement before the journey.
Highlights
- Fits an existing suitable 1/4-inch threaded vehicle mounting point.
- Ball head offers 360-degree rotation and a 90-degree tilt position.
- Locking lever can be repositioned to reduce its visibility in the frame.
- Includes a 1/4-inch to 3-Prong Adapter and thumb screw.
- 64.5g mount; camera-specific Quick Release Mount is separate.
Key Features
Use a Suitable Built-In Mounting Point
The lower 1/4-inch screw fits a designated threaded mounting socket in the vehicle. It offers an alternative to an adhesive base where that compatible socket is already available. Check the mounting point and orientation first: the screws at both ends have the same specification, so their position matters during installation.
Adjust the View Before Locking It
Loosen the lever to rotate the ball head and refine the shooting direction. The side notch allows a 90-degree tilt for a landscape camera position. Once the view is set, tighten the lever to lock the angle. Check the camera preview and prepare the position while parked, keeping the driver’s view and controls clear.
Keep the Lever Out of the Picture
After tightening, pull the lever outwards, reposition it and release it. This lets you move the lever to a less visible position without treating it as another camera-angle adjustment. Its appearance in 360 footage depends on the camera and framing, so preview the actual shot rather than assuming every part of the setup disappears.
Match the Camera’s Own Mounting Method
A compatible camera with a 1/4-inch mounting socket can connect to the upper screw as instructed. Ace-series cameras use the appropriate separate Quick Release Mount with the supplied 1/4-inch to 3-Prong Adapter and thumb screw. GO-series setups also need their supported camera-specific fitting; the adapter is not a substitute for the camera’s mounting base.
Check the Whole Connection
The package contains the mount, one 1/4-inch to 3-Prong Adapter and one thumb screw. Tighten all knobs and levers and check for wobble before recording. The manufacturer advises against magnetic quick-release arrangements in severe vibration or high-intensity use, and excludes pairing this adapter with a selfie stick or Unicorn Helmet Mount.
Summary
Insta360 1/4-inch In-Car Mount Adapter provides a compact threaded mounting route with flexible ball-head positioning. Choose it when the vehicle has a suitable designated socket, match the connection to the camera and check the complete setup before use. The included adapter and thumb screw support the prescribed mounting arrangements, with any camera-specific Quick Release Mount supplied separately.
Frequently Asked Questions
Does It Work in Every Car?
It needs a suitable existing 1/4-inch threaded mounting socket. It is not a suction cup, adhesive base or universal clamp. Check the designated mounting point and available clearance in your vehicle before ordering.
Is a Quick Release Mount Included?
No. The package contains the In-Car Mount Adapter, one 1/4-inch to 3-Prong Adapter and one thumb screw. A camera-specific Quick Release Mount, where required, is separate.
How Can I Change the Camera Angle?
Loosen the lever to adjust the ball head, then tighten it to lock the position. The head rotates through 360 degrees and can tilt into the side notch for a 90-degree landscape position. Check framing and every connection before use.
Can I Add a Selfie Stick?
No. The manufacturer excludes use with a selfie stick or Unicorn Helmet Mount because the camera could detach. Use a supported camera mounting arrangement directly on the adapter.
What Should I Check Before the Journey?
Set up while parked, keep the driver’s view and controls clear, and confirm that the socket, screws, knobs and levers are secure. Magnetic quick-release accessories are not recommended for severe vibration or high-intensity use.
사양
Insta360 1/4-inch In-Car Mount Adapter
This adapter uses a suitable existing 1/4-inch threaded vehicle mounting point and a ball head for positioning a supported camera. Its upper and lower screws share the same specification, so follow the intended installation orientation. The supplied three-prong adapter supports the prescribed camera connection, while camera-specific quick-release equipment remains separate. The figures below describe the mount itself. Check the socket, framing and all locking points before use.
| Specification | Details |
|---|---|
| Mounting and Adjustment | |
| Vehicle Connection | Existing suitable 1/4-inch threaded mounting socket |
| Camera Connection | 1/4-inch screw; supplied 1/4-inch to 3-Prong Adapter for supported arrangements |
| Ball-Head Rotation | 360° |
| Tilt Position | 90° side-notch position |
| Lever | Locks the angle and can be pulled out and repositioned after tightening |
| Physical Design | |
| Mount Weight | 64.5 g |
| Dimensions | 58.9 × 26 × 70.8 mm |
| Materials | Aluminium alloy, stainless steel, polycarbonate, TPU and silicone |
| Package and Use | |
| Included | 1 In-Car Mount Adapter; 1 three-prong adapter; 1 thumb screw |
| Separate Equipment | Camera and camera-specific Quick Release Mount, where required |
| Connection Check | Confirm correct orientation and tighten every knob, screw and lever |
| Excluded Pairings | Selfie stick and Unicorn Helmet Mount |
| Vibration Precaution | Magnetic quick-release arrangements are not recommended for severe vibration or high-intensity use |