Insta360 GO 3/GO 3S Magnet Pendant Safety Cord
A Second Connection for Your Hands-Free View When your GO camera is worn on the Magnet Pendant, a safety tether adds a useful second connection. This fitted case and cord are shaped for Insta360 GO 3 and GO 3S, helping retain the camera if it comes away from the magnetic attachment. The slim protective surround leaves the intended controls and microphone openings accessible, so the camera can stay ready for the next hands-free recording. Highlights Purpose-made protective case and tether for GO 3 and GO 3S. Connects to the Magnet Pendant’s cord or a suitable strap. Adds a retaining connection alongside the magnetic attachment. Fitted openings leave the camera’s buttons and microphones accessible. Lightweight 7.6g accessory; select the available colour. Key Features Give the Camera a Retaining Connection The custom case holds the Standalone Camera while the attached cord connects it to the Magnet Pendant’s lanyard or a strap. This adds a second connection if the magnetic mounting point becomes detached. Use it alongside a secure primary attachment and check the completed setup before moving. Fit the Camera Without Covering Its Openings Insert the GO 3 or GO 3S in the orientation shown in the guide, with the lens seated neatly in the opening. Check that the microphone and speaker openings remain clear. The shaped surround is designed for these small cameras, with access to the intended controls rather than an enclosed camera housing. Thread the Tether Before Recording Pass the camera through the ring at the end of the Safety Cord to fasten the tether to the pendant cord or a suitable strap. Confirm that the loop is properly secured and that the camera remains seated in the case. Take care not to press the recording button while fitting or removing it. Keep the Wearable Setup Light The published accessory weight is 7.6g, with a silicone, thermoplastic polyurethane and nylon construction. The flexible case and cord add retention without a large camera cage. Choose the available colour to suit the camera and keep the tether clear of anything that could pull on it during use. Check Clothing and the Intended Activity Thick clothing can weaken the Magnet Pendant’s hold, so check the magnetic attachment through the layer you are wearing. For more active recording, the manufacturer recommends using the Safety Cord together with the Magnet Pendant to reduce the risk of the camera coming loose. Children should use lanyard accessories under adult supervision. Summary Insta360 GO 3/GO 3S Magnet Pendant Safety Cord pairs a fitted camera surround with a lightweight retaining tether. Attach it correctly to a pendant cord or suitable strap, keep the openings clear and check the main mount before recording. It is a practical addition to a compatible hands-free setup, with the camera and Magnet Pendant supplied separately. Frequently Asked Questions Is the Magnet Pendant Included?ExpandCollapse No. This offer contains one Magnet Pendant Safety Cord in the selected colour. The camera and Magnet Pendant are separate. The cord fastens to the pendant’s lanyard or a suitable strap. Will It Fit GO Ultra or Another GO Camera?ExpandCollapse This case is made for GO 3 and GO 3S. The manufacturer’s current compatibility matrix does not support GO Ultra with this accessory. Match the fitted case to the exact camera model. How Do I Secure the Cord?ExpandCollapse Fit the camera in the shown orientation with its openings clear. Thread the camera through the end ring to tie the tether to the pendant cord or a suitable strap, then check the case and loop before use. Does It Guarantee the Camera Cannot Be Lost?ExpandCollapse It adds a retaining connection to help reduce the risk of a fall. Keep the camera seated correctly, inspect the cord and use a secure main attachment. Clothing, activity and the complete setup still affect how the camera is held. What Should I Check Before Wearing It?ExpandCollapse Avoid thick clothing that weakens the Magnet Pendant’s hold, keep the tether clear and supervise children using lanyards. The Magnet Pendant should not be used by someone with a pacemaker because of its magnetism.
Pickup available at 3005, Ubi Avenue 3, #01-88
일반적으로 2~4일 후 준비 완료
Insta360 GO 3/GO 3S Magnet Pendant Safety Cord
제품 설명
A Second Connection for Your Hands-Free View
When your GO camera is worn on the Magnet Pendant, a safety tether adds a useful second connection. This fitted case and cord are shaped for Insta360 GO 3 and GO 3S, helping retain the camera if it comes away from the magnetic attachment. The slim protective surround leaves the intended controls and microphone openings accessible, so the camera can stay ready for the next hands-free recording.
Highlights
- Purpose-made protective case and tether for GO 3 and GO 3S.
- Connects to the Magnet Pendant’s cord or a suitable strap.
- Adds a retaining connection alongside the magnetic attachment.
- Fitted openings leave the camera’s buttons and microphones accessible.
- Lightweight 7.6g accessory; select the available colour.
Key Features
Give the Camera a Retaining Connection
The custom case holds the Standalone Camera while the attached cord connects it to the Magnet Pendant’s lanyard or a strap. This adds a second connection if the magnetic mounting point becomes detached. Use it alongside a secure primary attachment and check the completed setup before moving.
Fit the Camera Without Covering Its Openings
Insert the GO 3 or GO 3S in the orientation shown in the guide, with the lens seated neatly in the opening. Check that the microphone and speaker openings remain clear. The shaped surround is designed for these small cameras, with access to the intended controls rather than an enclosed camera housing.
Thread the Tether Before Recording
Pass the camera through the ring at the end of the Safety Cord to fasten the tether to the pendant cord or a suitable strap. Confirm that the loop is properly secured and that the camera remains seated in the case. Take care not to press the recording button while fitting or removing it.
Keep the Wearable Setup Light
The published accessory weight is 7.6g, with a silicone, thermoplastic polyurethane and nylon construction. The flexible case and cord add retention without a large camera cage. Choose the available colour to suit the camera and keep the tether clear of anything that could pull on it during use.
Check Clothing and the Intended Activity
Thick clothing can weaken the Magnet Pendant’s hold, so check the magnetic attachment through the layer you are wearing. For more active recording, the manufacturer recommends using the Safety Cord together with the Magnet Pendant to reduce the risk of the camera coming loose. Children should use lanyard accessories under adult supervision.
Summary
Insta360 GO 3/GO 3S Magnet Pendant Safety Cord pairs a fitted camera surround with a lightweight retaining tether. Attach it correctly to a pendant cord or suitable strap, keep the openings clear and check the main mount before recording. It is a practical addition to a compatible hands-free setup, with the camera and Magnet Pendant supplied separately.
Frequently Asked Questions
Is the Magnet Pendant Included?
No. This offer contains one Magnet Pendant Safety Cord in the selected colour. The camera and Magnet Pendant are separate. The cord fastens to the pendant’s lanyard or a suitable strap.
Will It Fit GO Ultra or Another GO Camera?
This case is made for GO 3 and GO 3S. The manufacturer’s current compatibility matrix does not support GO Ultra with this accessory. Match the fitted case to the exact camera model.
How Do I Secure the Cord?
Fit the camera in the shown orientation with its openings clear. Thread the camera through the end ring to tie the tether to the pendant cord or a suitable strap, then check the case and loop before use.
Does It Guarantee the Camera Cannot Be Lost?
It adds a retaining connection to help reduce the risk of a fall. Keep the camera seated correctly, inspect the cord and use a secure main attachment. Clothing, activity and the complete setup still affect how the camera is held.
What Should I Check Before Wearing It?
Avoid thick clothing that weakens the Magnet Pendant’s hold, keep the tether clear and supervise children using lanyards. The Magnet Pendant should not be used by someone with a pacemaker because of its magnetism.
사양
Insta360 GO 3/GO 3S Magnet Pendant Safety Cord
The Magnet Pendant Safety Cord is a fitted camera case and tether for the GO 3 and GO 3S Standalone Cameras. It adds a retaining connection to a compatible pendant cord or strap while leaving the intended camera openings accessible. The dimensions and weight below describe the accessory, not a camera-and-pendant bundle or shipping parcel. Install it in the correct orientation, check the loop and follow the wearing precautions before recording.
| Specification | Details |
|---|---|
| Camera Fit and Attachment | |
| Compatible Cameras | Insta360 GO 3 and GO 3S Standalone Cameras |
| Tether Attachment | Magnet Pendant cord or a suitable strap |
| Camera Access | Fitted openings for lens, controls, microphones and speaker |
| Colour | Select the available colour |
| Physical Design | |
| Published Accessory Weight | 7.6 g |
| Dimensions | 57.6 × 30.2 × 19 mm |
| Materials | Silicone, thermoplastic polyurethane and nylon |
| Package and Safe Use | |
| Included | 1 Magnet Pendant Safety Cord in the selected colour |
| Separate Equipment | Camera and Magnet Pendant |
| Wearing | Check magnetic hold; avoid thick clothing that weakens attachment |
| Lanyard Precaution | Children require adult supervision |
| Magnetic Precaution | Do not use the Magnet Pendant with a pacemaker |












